SSR-4130733510-22-SE1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
SSR-4130733510-22-SE1 Rev 1.0 www.eravant.com | 501 Amapola Ave, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com WR-22 Receiver, 37 to 44 GHz, 3.5 dB Noise Figure, 10 dB Gain Page | 1 SAGE Millimeter, Inc. Copyright © 2023 by Eravant Description: Model SSR-4130733510-22-SE1 is a WR-22 integrated receiver module for Starlink and Milstar applications. The receiver has a typical conversion gain of 10 dB with a typical noise figure of 3.5 dB in the frequency range of 37 to 44 GHz. The required LO power is +0 dBm between frequencies of 9 and 11 GHz. The RF receive port is WR-22 Uni-Guide™ Waveguide with UG-383/U Anti-Cocking Flange while the LO and IF port is female SMA connectors. Other port configurations, are also available under different model numbers. Features:
- Good Gain Flatness and Noise Figure
- Built in x4 LO Multiplier
- Fully Integrated Module Applications:
- 5G Systems
- Starlink
- Milstar Electrical Specifications: Parameter Minimum Typical Maximum RF Input Frequency 37 GHz 44 GHz RF Input Power +15 dBm IF Output Frequency DC 7 GHz LO Frequency 9 GHz 11 GHz LO Input Power +0 dBm +5 dBm Conversion Gain 10 dB Noise Figure 3.5 dB Input P1dB -18 dBm Bias Voltage +6 VDC +8 VDC +15 VDC Bias Current 200 mA Specification Temperature +25 °C Operating Temperature 0 °C +50 °C Mechanical Specifications: Item Specification RF Port WR-22 Uni-Guide™ Waveguide with UG-383/U Anti-Cocking Flange LO Port SMA (F) IF Port SMA (F) Bias Solder Pin Case Material Aluminum Finish Gold Plated Weight 2.0 Oz Outline SR-SQ-A-3
SSR-4130733510-22-SE1 Rev 1.0 www.eravant.com | 501 Amapola Ave, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com WR-22 Receiver, 37 to 44 GHz, 3.5 dB Noise Figure, 10 dB Gain Page | 2 SAGE Millimeter, Inc. Copyright © 2023 by Eravant 37 38 39 40 41 42 43 44 Conversion Gain (dB) Frequency (GHz) Conversion Gain vs. Frequency Bias: +8VDC / 234mA; LO = 0dBm IF = 0.1GHz IF = 4GHz IF = 7GHz 37 38 39 40 41 42 43 44 Noise Figure (dB) Frequency (GHz) Noise Figure vs. Frequency Bias: +8VDC / 234mA; LO = 0dBm; IF = 100 MHz
SSR-4130733510-22-SE1 Rev 1.0 www.eravant.com | 501 Amapola Ave, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com WR-22 Receiver, 37 to 44 GHz, 3.5 dB Noise Figure, 10 dB Gain Page | 3 SAGE Millimeter, Inc. Copyright © 2023 by Eravant Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) Note:
- The receiver employs Eravant’s trademarked and patent pending technology, Uni-Guide™, as its waveguide interfaces. The orientation of the input and the output waveguides can be specified through corresponding model numbers. For example, the model number for a horizontal output waveguide configuration would be SSR-4130733510-22H-SE1 instead of the default SSR- 4130733510-22-SE1 which indicates vertical orientation output.
- Eravant reserves the right to change the information presented without notice.
- Other mechanical configurations are available under different model numbers. Caution:
- Exceeding absolute maximum ratings shown will damage the device.
- The device is static sensitive. Always follow ESD rules when working with the device.
- The case temperature of the device shall never exceed +50 ˚C. Use proper heatsink or fan if necessary. wrench, model SCH-08008-S1, is highly recommended.