SSP-35310-NAN-D2 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com SAGE Millimeter, Inc. Page | 1
35.00 GHz Ranging Sensor Module, Dual Channel, Long Range
Copyright © 2019 by SAGE Millimeter, Inc. Description: Model SSP-35310-NAN-D2 is Ka Band, ranging sensor module that is designed and manufactured for long range measurements of a moving or stationary target's range, speed and direction. The sensor head has a center frequency of 35 GHz and takes a nominal bias of +5.0 VDC/350 mA. The frequency modulation bandwidth of ±100 MHz minimum is realized via a tuning voltage of 0 to +24 Volts. The sensor heads are configured with a T/R diplexer, a low noise RF amplifier, an I/Q receiver, an IF amplifier and a TX/RX oscillator in an integrated package. Features:
- 35.00 GHz Operation
- Low Flicker Noise and High Sensitivity
- Low Harmonic Emission
- Integrated RX /IF amplifier Applications:
- Traffic Management Systems
- Microwave Fence
- Military Surveillance Systems
- Weather and Environment Monitoring Electrical Specifications: Parameter Minimum Typical Maximum RF Frequency Range 33.9 GHz 35.0 GHz 36.1 GHz FMCW Tuning Bandwidth ±75 MHz ±100 MHz FMCW Tuning Voltage 0 +24 Volts Transmitting Power +10 dBm Receiver Gain 19 dB Receiver Noise Figure 2.5 dB Receiver I/Q Phase Δ 80˚ 100˚ Receiver I/Q Amplitude Δ 0 dB 3 dB IF Gain 35 dB IF Frequency Range DC 2 MHz IF Offset Voltage ±0.1 VDC Frequency Stability -0.3 MHz/°C Power Stability -0.03 dB/°C DC Supply Voltage +5 VDC/350 mA +5.5 VDC Specification Temperature +25˚C Case Temperature -40˚C +85˚C
www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com SAGE Millimeter, Inc. Page | 2 Copyright © 2019 by SAGE Millimeter, Inc. Mechanical Specifications: Item Specification Gunn Oscillator Bias Port Red Wire (Bias Pin) Varactor Bias Port Green Wire (Bias Pin) Mixer IFI Port Bias Pin Mixer IFQ Port Bias Pin Mixer IF Ground Black Wire (Ground Log) Material Aluminum Finishing Chem Film Outline SD-NA-NAD Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) Note:
- SAGE Millimeter, Inc. reserves the right to change the information presented without notice. Caution:
- The device is static sensitive. Always follow ESD rules when working with the device.
- Wrong bias or reverse bias on the sensor will damage the device.
- Exceeding absolute maximum ratings shown will damage the device. Use an additional heatsink or fan if necessary.