SSC-5736536024-1515-SR1 ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

SSC-5736536024-1515-SR1 Advanced Rev 1.1 www.eravant.com | 501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com V-Band Transceiver, RX 56 to 58 GHz, and TX 64 to 66 GHz Page | 1 SAGE Millimeter, Inc. Copyright © 2022 by Eravant Description: Model SSC-5736536024-1515-SR1 is a V Band transceiver. The transmitter has a typical transmit output power of +24 dBm in the frequency range of 64 to 66 GHz with an IF input power of 0 dBm and frequency range of DC to 5 GHz. The receiver has a typical receiving linear conversion gain of 20 dB and noise figure of 5.0 dB in the frequency range of 56 to 58 GHz with a IF output frequency range of DC to 5 GHz. The receiver signal linear range is from -100 to -20 dBm. The required typical LO power and frequency range are +5 dBm, 10.83 GHz for the transmitter and 9.5 GHz for receiver channels respectively. The LO and IF ports are equipped with a female SMA connectors and the RX/TX port is a WR-15 waveguide with a UG-385/U flange via a waveguide diplexer. Although the module is offered in a monostatic version via a frequency diplexer, bi-static version is available per request. Features:

  • Compact Size
  • High Performance
  • Low Cost
  • Fully Integrated Module Applications:
  • V Band Communication Systems Electrical Specifications: Parameter Minimum Typical Maximum TX RF Output Frequency 64 GHz 66 GHz TX RF Output Power, P-1 dB +24 dBm TX IF Input Frequency DC 5 GHz TX IF Input Power 0 dBm TX LO Input Frequency 10.66 GHz 11.16 GHz TX LO Input Power +5 dBm RX RF Input Frequency 56 GHz 58 GHz RX Noise Figure 5 dB RX RF Input Power -100 dBm -20 dBm +3 dBm RX IF Output Frequency DC 5 GHz RX Conversion Gain 20 dB RX LO Frequency 9.33 GHz 9.67 GHz RX LO Input Power +5 dBm TX and RX Isolation 55 dB DC Voltage Supply +6 VDC +8VDC +12 VDC DC Current Supply 2,500 mA Specification Temperature +25 °C Operation Temperature 0 °C +50 °C Storage Temperature -40 °C +85 °C

SSC-5736536024-1515-SR1 Advanced Rev 1.1 www.eravant.com | 501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com V-Band Transceiver, RX 56 to 58 GHz, and TX 64 to 66 GHz Page | 2 SAGE Millimeter, Inc. Copyright © 2022 by Eravant Mechanical Specifications: Item Specification TX/RX Port WR-15 Waveguide with UG-385/U Flange TX IF Port SMA(F) RX IF Port SMA(F) TX LO Port SMA(F) RX LO Port SMA(F) Bias Solder Pin Weight 8 Oz Finishing Gold Plated Outline SC-VC Block Diagram: Mechanical Outline: (Unless otherwise specified, all dimensions are in inches)

SSC-5736536024-1515-SR1 Advanced Rev 1.1 www.eravant.com | 501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com V-Band Transceiver, RX 56 to 58 GHz, and TX 64 to 66 GHz Page | 3 SAGE Millimeter, Inc. Copyright © 2022 by Eravant -25 -20 -15 -10 -25 -20 -15 -10 Gain (dB) Frequency (GHz) Return Loss (dB) Typical RX Gain and Return Loss vs. Frequency Bias: +8 VDC/2,500 mA Gain Input Return Loss Noise Figure (dB) Frequency (GHz) Typical RX Noise Figure vs. Frequency Bias: +8 VDC/2,500 mA

SSC-5736536024-1515-SR1 Advanced Rev 1.1 www.eravant.com | 501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com V-Band Transceiver, RX 56 to 58 GHz, and TX 64 to 66 GHz Page | 4 SAGE Millimeter, Inc. Copyright © 2022 by Eravant Note:

  • All data are presented using a limited sample lot. Actual data may vary unit to unit.
  • All testing was performed under +25 ˚C case temperature.
  • Eravant reserves the right to change the information presented without notice.
  • Other mechanical configurations are available under different model number. Caution:
  • Exceeding absolute maximum ratings shown will damage the device.
  • The device is static sensitive. Always follow ESD rules when working with the device.
  • Any foreign objects into the waveguide will cause performance degradation and possible device damage.
  • The case temperature of the device shall never exceed +50 ˚C. Use proper Heatsink or fan if necessary. Output Power (dBm) Frequency (GHz) Typical TX Output Power vs. Frequency Bias: +8 VDC/ 2,500mA P-1 Psat