SSB-0618 MARKIMICROWAVE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
LO/RF 6.0 to 18.0 GHz IF (input) 4 to 210 MHz 7.5 dB Typical Conversion Loss 35 dB Typical LO to RF Isolation 23 dB Typical Sideband Suppression Connectorized Ultra-Broadband IF For a list of recommended LO driver amps for all mixers and IQ mixers, see here. Electrical Specifications - Specifications guaranteed from -55 to +100C, measured in a 50-Ohm system. Parameter LO RF IF Min Typ Max Diode Option (GHz) (GHz) (MHz) LO drive level (dBm) Sideband Suppression (dB) 8.0-18.0 8.0-18.0 4-210 16 23 6.0-18.0 6.0-18.0 4-210 14 23 Isolation (dB) LO-RF 8.0-18.0 8.0-18.0 25 35 Input 1 dB Compression (dBm) 6.0-18.0 6.0-18.0 +4 L (+10 to +13) +6 M (+13 to +16) Input Two-Tone Third Order Intercept Point (dBm) +16 M (+13 to +16) Part Number Options Please specify diode level and package style by adding to model number. Package Style(s)1 Example XW (-1 or -2) SSB-0618 L XW-1 1 -1 = FR (out) < FL; -2 = FR (out) > FL. Higher LO drive levels are available. Marki Microwave reserves the right to make changes to the product(s) or information contained herein without notice. Marki Microwave makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Marki Mi crowave assume any liability whatsoever arising out of the use of or application of any product.
Copyright © [2010, 2020] Marki Microwave, Inc. All Rights Reserved. SINGLE-SIDEBAND DOUBLE-BALANCED MIXERS SSB-0618 Page 2 LO/RF 6.0 to 18.0 GHz IF (input) 4 to 210 MHz Typical Performance 1:1 2:1 3:1 RF Port VSWR 2:1 3:1 1:1 LO Port VSWR LO to RF Isolation - dB
15 Single Sideband Suppression - dBUpconversion Loss - dB
6.0 GHz 18.0 10.0 6.0 8.0 6.0 GHz 18.0 6.0 GHz 18.0 6.0 GHz 18.0 6.0 GHz 18.0 DATA SHEET NOTES: 1. Mixer Conversion Loss Plot IF frequency is 70 MHz. 2. Mixer Noise Figure typically measures within 0.5 dB of conversion loss for IF frequencies greater than 5 MHz. 3. Conversion Loss typically degrades less than 0.5 dB for LO drives 2 dB below the lowest and 3 dB above highest nominal LO drive levels. 4. Conversion Loss typically degrades less than 0.5 dB at +100°C and improves less than 0.5 dB at -55°C. 5. Maximum input power is +26 dBm at +25°C, derated linearly to +23 dBm at +100°C. 6. Specifications are subject to change without notice. Contact Marki Microwave for the most recent specifications and data sheets. 7. Catalog mixer circuits are continually improved. Configuration control requires custom mixer model numbers and specifications. Marki Microwave reserves the right to make changes to the product(s) or information contained herein without notice. Marki Mi crowave makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Marki Microwave a ssume any liability whatsoever arising out of the use or application of any product. www.markimicrowave.com