SMT30C ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
DC-DC CONVERTERS C Class Non-isolated 1 SMT30C Series
12 Vin single output
File Name: smt30c.pdf Rev (04): 16 Dec 2005
2 YEAR WARRANTY
- 30 A current rating
- Input voltage range: 10.2 Vdc - 13.8 Vdc
- Output voltage range: 0.9 Vdc - 5.0 Vdc
- Industry leading value
- Cost optimized design
- Excellent transient response
- Output voltage adjustability
- Pathway for future upgrades
- Supports silicon voltage migration
- Resulting in reduced design-in and qualification time
- Designed in reliability: MTBF of > 4 million hours per Telcordia SR-332
- Available RoHS compliant The SMT30C series is a new high density open-frame, non-isolated converter for space sensitive applications. SMT30C has a wide input range of 10.2 Vdc to 13.8 Vdc and offers a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 30 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiency is 91%. The series offers remote ON/OFF and over-current protection as standard. With full international safety approvals including EN60950 and Ul/cUL60950, the SMT30C reduces compliance costs and time to market. All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) 0.9-5.0 Vdc Output setpoint accuracy 1.0% trim resistors ±3% Line regulation Low line to high line ±0.2% max. Load regulation Full load to min. load ±1.0% max. Min/max load 0 A/30 A Overshoot At turn-on 1.0% max. Undershoot At turn-off 100 mV max. Ripple and noise (See Note 2) 50 mV pk-pk
5 Hz to 20 MHz 15 mV rms
Transient response 75 mV max. deviation (See Note 3) 150 µs recovery to within regulation band Current share Full load ±10% INPUT SPECIFICATIONS Input voltage range Nominal 12 V 10.2-13.8 Vdc Input current Minimum load 230 mA Remote OFF 30 mA Input current (max.) (See Note 4) 13.8 A max. @ Io max. and Vin = 10.8 V Input reflected ripple (See Note 2) 150 mA (pk-pk) Remote ON/OFF Logic compatibility Positive logic ON >2.4 Vdc OFF <0.8 Vdc Start-up time Power-up <30 ms (See Note 5) Remote ON/OFF <30 ms INPUT SPECIFICATIONS (CONTD.) Turn ON threshold 9.0 Vdc typ. Turn OFF threshold 7.6 Vdc typ. GENERAL SPECIFICATIONS Efficiency 91% typ. Switching frequency Fixed 300 kHz typ. Approvals and (See Note 7) TÜV Product Services standards IEC60950, UL/cUL60950 Material flammability UL94V-0 Weight 28.3 g (1 oz) Coplanarity 150 µm MTBF Telcordia SR-332 4,456,655 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, 0 ºC to +80 ºC (See Note 8) temperature Non-operating -40 ºC to +125 ºC PROTECTION Short-circuit Foldback, non-latching Over-temperature Hiccup, non-latching RECOMMENDED SYSTEM CAPACITANCE Input capacitance (See Note 9) 270 µF/20 mΩ ESR max. Output capacitance (See Note 9) 2 x 680 µF/10 mΩ ESR max.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm SMT30C Series DC-DC CONVERTERS C Class Non-isolated 2 NEW Product OUTPUT INPUT OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODELPOWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER (11,12) (MAX.) (MIN.) (MAX.) File Name: smt30c.pdf Rev (04): 16 Dec 2005 NNootteess 1 Uses external resistor from TRIM to ground. See Application Note 170 for details. 2 Measured with external filter. See Application Note 170 for details. 3 di/dt = 10 A/µs, Vin = Nom, Tc = 25 ºC, load change = 0.50 lo max. to 0.75 lo max, and vice versa. 4 External input fusing recommended. 5 Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6 Signal line assumed <3 m in length.
7 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product. 8 See Application Note 170 for operation above 50 ºC. 9 See Application Note 170 for more details.
10 For redundant current sharing applications that use ORing diodes to
separate the outputs, please add the suffix ‘-S’ to the part number, e.g. SMT30C-12SADJ-SJ. Please refer to Application Note 170 for further details.
11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. 60950 UL 60950 File No. E139421 TÜV Product Service (EN60950:2000) Certificate No. B 04 08 19870 228 CB report and certificate to IEC60950-US/6415C/UL SMT30C-12SADJJ Part Number System with Options Number of Outputs SADJ = Single Adjustable Output Product Family SMT = Surface Mount Performance C = Cost Optimized Packaging Options(11) J = Pb-free (RoHS 6/6 compliant) Rated Output Current 30 = 30 A Input Voltage 12 = 10.2 Vdc to 13.8 VdcThe ultra-wide output voltage trim range offers major advantages to users who select the SMT30C. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT30C converter leaves the factory the output has been adjusted to the default voltage of 0.9 V. OOuuttppuutt VVoollttaaggee AAddjjuussttmmeenntt ooff tthhee SSMMTT3300CC SSeerriieess
For the most current data and application support visit www.artesyn.com/powergroup/products.htm SMT30C Series DC-DC CONVERTERS C Class Non-isolated 3 NEW Product All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated 2.280 (57.91) 1.450 (36.83) PCB REF 0.062 (1.57) 0.43 (10.8) 0.105 (2.67) 0.011 (0.27) Typ 0.140 (3.56) 15 x 0.090 (2.29) 2.100 (53.34) 0.045 (1.13) 0.485 (12.33) 1.140 (28.96) PIN 1 PIN 16 PIN 17 PIN 18 1.345 (3417) 2 x Seating Plane Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com File Name: smt30c.pdf Rev (04): 16 Dec 2005 PIN CONNECTIONS PIN NO. FUNCTION PIN NO. FUNCTION