SIL20C2-00SADJ-HJ_15 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Total Power: 20 Amps Input Voltage: 4.5 - 13.8 Vdc # of Outputs: Single SPECIAL FEATURES 20 A current rating Input voltage range: 4.5 - 13.8 Vdc Output voltage: 0.59 - 5.1 V Industry-leading value Cost optimized design Excellent transient response Output enable Output voltage adjustability Path for future upgrades Supports silicon voltage migration Reduced design-in and qual time Current sink capability RoHS compliant Two year warranty SAFETY UL, cUL CAN/CSA 22.2 No. TÜV Product Service (EN60950) CB report and certificate to IEC60950 Electrical Specifications Input Input voltage ra nge 4.5 - 13.8 Vdc Input current Minimum load Remote OFF 50 mA 5 mA Input current (max.) See Note 3 18 A @ lo max. Start-up time Remote ON/OFF 3 ms Output Output voltage See Note 5 0.59 - 5.1 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min./max. load 0 A/20 A Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise
5 Hz to 20 MHz
Vin = 5 V, Vout = 2.5 V Transient response See Note 1, 2 130 mV max. deviation; 50 μs recovery to within regulation band General Efficiency Vin = 5 V, Vo = 2.5 V, lo = 20 A 90% Switching frequency Fixed 750 kHz Material flammability UL94V-0 Approvals and standards EN60950; UL/cUL6950 Weight 8.50 g (0.03 oz.) MTBF 12 V @ 40 °C, 100% load Bellcore 332 6,721,853 hours Coplanarity 150 μm All specifications are typical at nominal input, full load at 25 °C, unless otherwise stated. Data Sheet
SIL/SMT20C2 Series Data Sheet Environmental Specifications Thermal performance Operating ambient temperature -0 °C to +70 °C See Note 5 Non-operating temperature -40 °C to +125 °C Protection Short-circuit Hiccup, non-latching Overvoltage protection Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 μF Output See Note 7 0 μF Output Voltage Adjustment The ultra-wide output voltage trim range offers major advantages to users who select the SIL/SMT40C2 series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.59 - 5.1 V. When the SIL20C2 converter leaves the factory, the output has been adjusted to the default voltage of 0.59 V.
Ordering Information
Number (8) Output Power (Max.) Input Voltage Mount Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load SMT20C2-00SADJJ 100 W 4.5 - 13.8 Vdc Horizontal Surface Mount Notes: 1. Measured as per recommended system capacitance. 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.75 lo to full lo and full lo to 0.75. 3. External input fusing is recommended. 4. Additional part numbers may be available with different output voltages. 5. Airflow dependent, 100 LFM minimum required. 6. No capacitors needed for ripple current stability. 7. No capacitors needed for stability. 8. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line model number search tool at http://www.Artesyn.com/power to find a suitable alternative. Part Number System with Options SXX 20 C 2 - 00 SADJ - V J Product Family SIL = Single In Line SMT = Surface Mount Output Voltage Single Adjustable Output Performance C = Cost Optimized Input Voltage 00 = 4.5 - 13.8 V Generation Blank = Standard 2 = Increased current density RoHS Compliance J = Pb free (RoHS 6/6 compliant) Mounting Option V = Vertical H = Horizontal Blank = Horizontal Surface Mount Rated Output Current 06 = 6 Amp 15 = 15 Amp 20 = 20 Amp 30 = 30 Amp 40 = 40 Amp Standard Application Drawing SIL20C2 Enable Vin GND R trim (for trim down) C out R L O A D Power Good Vout +R sense -R sense C in
SIL/SMT20C2 Series Data Sheet Mechanical Drawings Dimensions in Inches (mm) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.050 (1.27) REF 0.295 (7.49) 0.462 (11.73) 0.062 (1.57) PCB REF 0.150 (3.81) TYP 0.105 (2.67) 0.025 (0.64) ±.001 SQ PIN TYP
8 PLACES
0 (0) 0.100 (2.54) 0.200 (5.08) 0.600 (15.24) 0.700 (17.78) 0.800 (20.32) 0.900 (22.86) 1.050 (26.67) 1.150 (29.21) 1.200 (30.48) 0.610 (15.49) PIN 1PIN 8 Dimensions in Inches (mm) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.295 (7.49) 0.482 (12.24) 0.025 (0.64) ±.001 SQ PINS TYP
9 PLACES
0.125 (3.18) TYP 0.120 (3.05) TYP 0.062 (1.57) REF 0.000 (0) 0.200 (5.08) 0.100 (2.54) 0.600 (15.24) 0.700 (17.78) 0.800 (20.32) 0.900 (22.86) 1.050 (26.67) 1.150 (29.21) 1.165 (29.59) 1.200 (30.48) 0.040 (1.02) REF PIN 1 PIN 9 Vertical Mount Horizontal Mount Pin Assignments Pin Function
1 Vout
2 Trim
3 Ground
4 Power Good
5 Enable
6 Vin
7 Remote Sense (+)
8 Remote Sense (-)
(Horizontal version only)
SIL/SMT20C2 Series Data Sheet WORLDWIDE OFFICES Americas 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. SIL/SMT20C2 Series 06Apr2015 Mating Connectors Mechanical Drawings Dimensions in Inches (mm) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.535 (13.59) PIN 1 PIN 8 PIN 9PIN 10 0.025 (0.64) ±.002 PIN WIDTH TYP 0.295 (7.49) 0.482 (12.24) 0.062 (1.57) PCB REF 0.040 (1.02) 0.125 (3.18) TYP 0 (0) 0.100 (2.54) 0.200 (5.08) 0.600 (15.24) 0.700 (17.48) 0.800 (20.32) 0.900 (22.86) 1.050 (26.67) 1.150 (29.21) 1.200 (30.48) 0.610 (15.49) Surface Mount Pin Assignments Pin Function
9 Mech Support
(Horizontal Version only
10 Mech Support
(Horizontal Version only