SMT20C2-00SADJ-HJ

SIL40C2 ARTESYN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

4 . 5 - 1 3 . 8 V i n S i n g l e O u t p u t File Name: sil40c2.pdf Rev: 15 Mar 2006 March 15, 2006 2 year warranty

• 40 a current rating
• Input voltage range: 4.5-13.8 V
• Output voltage: 0.6-5 V
• Industry leading value
• Cost optimized design
• excellent transient response
• Output enable
• Output voltage adjustability
• Pathway for future upgrades
• Supports silicon voltage migration
• resulting in reduced design-in and qual time
• roHS compliant The SIL40C2 series is a new high density open frame non-isolated converter for space sensitive applications. This model has a wide input range (4.5-13.8 Vdc) and offers a wide 0.6-5 V output voltage range with 40 A load capability. An external resistor adjusts the output voltage from its pre-set value of 0.6 V to any value up to the 5 V maximum. Typical efficiencies for the models are 91% for the 12 V input version. The SIL40C2 series offers remote ON/OFF and over-current protection as standard. DC-DC CONVERTERS C Class Non-isolated 1 NEW Product All specifications are typical at nominal input, full load at 25 °C unless otherwise stated SPECIFICATIONS Output voltage (See Note 5) 0.6-5 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min/max load 0 A/40 A Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. Ripple and noise

5 Hz to 20 MHz

(See Note 1) 25 mV Vin = 5 V , Vout = 2.5 V Transient response (See Notes 1, 2) 150 mV max. deviation 30 µs recovery within regulation band OUTPUT SPECIFICATIONS Efficiency Vin=5 V , Vo=2.5 V , lo=20 A 94% Typ. Switching frequency Fixed 500 kHz Approvals and standards (pending) EN60950 UL/cUL60950 Material flammability UL94V-0 Weight 17 g/0.06 oz. MTBF 12 V @ 40 °C 100% load Bellcore 332 6,749,409 hours Coplanarity 150 µm GENERAL SPECIFICATIONS Thermal performance (See Note 5) Operating ambient, temperature Non-operating 0 °C to +70 °C -40 °C to +125 °C ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range 4.5-13.8 Vdc Input current Minimum load Remote OFF 50 mA 5 mA Input current (max.) (See Note 3) 25 A @ Io max. Start-up time Remote ON/OFF 3 ms Short-circuit Hiccup, non-latching Over voltage Hiccup, non-latching PROTECTION Input capacitance (See Note 6) 0 µF Output capacitance (See Note 7) 0 µF RECOMMENDED SYSTEM CAPACITANCE UL/cUL CAN/CSA 22.2 No. E139421 UL60950 File No. TBD TÜV Product Service (EN60950) Certificate No. TBD CB report and certificate to IEC60950 International Safety Standard Approvals

4 . 5 - 1 3 . 8 V i n S i n g l e O u t p u t File Name: sil40c2.pdf Rev: 15 Mar 2006 March 15, 2006 OUTPUT INPUT OVP OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL POWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER (8, 9) (MAX.) (MIN.) (MAX.) For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product DC-DC CONVERTERS C Class Non-isolated 2 Part Number System with Options Product Family SIL = Single In Line SMT = Surface Mount Rated Output Current 06 = 6 A 15 = 15 A 20 = 20 A 30 = 30 A 40 = 40 A Input Voltage 00 = 4.5-13.8 V Performance C = Cost Optimized The ultra-wide output voltage trim range offers major advantages to users who select the SIL40C2. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.6-5 V. When the SIL40C2 converter leaves the factory the ouput has been adjusted to the default voltage of 0.6 V. Output Voltage Adjustment of the SIL40C2 Ser ies Mounting Option V = Vertical H = Horizontal Output Voltage Single Adjustable Output Generation Blank = Standard Part 2 = Increased Current Density S I L 4 0 C 2 - 0 0 S A D J - V J RoHS Compliance (8) J = Pb-free (RoHS 6/6 compliant) Notes 1 Measured as per recommended system capacitance. 2 di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.75 lo to full lo and full lo to 0.75. 3 External input fusing is recommended.

4 Additional part numbers may be available with different output

voltages. 5 Airflow dependent, 100 LFM minimum required. 6 No capacitor needed for ripple current capability. 7 No capacitor needed for stability.

8 TSE RoHS 5/6 (non PB-free) compliant versions are also available

on special request, please contact your local sales representative for details. 9 NOTICE: Some models may not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/ products.htm to find a suitable alternative. 7,8 10,11 1,2,3 SIL40C2 Enable Vin GND Rtrim (for trim down) Cout R L O A D Power Good Vout +Rsense Cin Figure 1: Standard Application Drawing

4 . 5 - 1 3 . 8 V i n S i n g l e O u t p u t File Name: sil40c2.pdf Rev: 15 Mar 2006 March 15, 2006 Figure 2: Vertical Mount Mechanical Drawing Figure 3: Horizontal Mount Mechanical Drawing PIN CONNECTIONS PIN NO. FUNCTION

1 Vout

2 Vout

3 Vout

4 Trim

5 Enable

6 Power Good

7 Ground

8 Ground

9 (+) Sense

10 Vin

11 Vin

12 *Mech Support 13 *Mech Support For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product DC-DC CONVERTERS C Class Non-isolated 3 * Horizontal and SMT version only Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.100 (2.54) 1.050 (26.67)

9 PLACES

1.100 (27.94) 1.200 (30.48) 0.050 (1.27) REF 0.140 (3.56) TYP PIN 1 0.050 (1.27) TYP 0.255 (6.48) 0.110 (2.79) 0.427 (10.85) 0.025 (0.64) ±.001 SQ PINS TYP 0.062 (1.57) REF 0.100 (2.54) TYP Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 1.100 (27.94) 1.200 (30.48) PIN 1 0.255 (6.48) 0.110 (2.79) REF 0.468 (11.89) 0.062 (1.57) REF .150 (3.81) TYP 0.025 (0.64) ±.001 SQ PINS TYP

13 PLACES

0.120 (3.05) TYP 2X 1.050 (26.67) 0.100 (2.54) REF 0.050 (1.27) REF 1.000 (25.40) 0.050 (1.27) 0.100 (2.54) TYP

4 . 5 - 1 3 . 8 V i n S i n g l e O u t p u t File Name: sil40c2.pdf Rev: 15 Mar 2006 March 15, 2006 For the most current data and application support visit www.artesyn.com/powergroup/products.htm DC-DC CONVERTERS C Class Non-isolated 4 NEW Product Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com Figure 4: Surface Mount Mechanical Drawing Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 1.100 (27.94) 1.200 (30.48) PIN 1 0.255 (6.48) 0.110 (2.79) REF 0.442 (11.23) 0.062 (1.57) REF 0.125 (3.18) TYP 2X 1.050 (26.67) 0.100 (2.54) REF 0.050 (1.27) REF 1.000 (25.40) 0.050 (1.27) 0.100 (2.54) TYP PIN NO. FUNCTION 9 (+) Sense 12 *Mech Support 13 *Mech Support * Horizontal and SMT version only