SMT30C-12SADJJ_15 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Total Power: 30 Watts Input Voltage: 10.2 - 13.8 Vdc # of Outputs: Single Electrical Specifications Input Input voltage ra nge Nominal 12 V 10.2 - 13.8 Vdc Input current Minimum load Remote OFF 230 mA 30 mA Input current (max.) (See Note 4) 13.8 A max. @ Io max. and Vin = 10.8 V Input reflected ripple (See Note 2) 150 mA (pk-pk) Remote ON/OFF Logic compatibility ON OFF Positive logic >2.4 Vdc <0.8 Vdc Start-up time (See Note 5) Power up Remote ON/OFF <30 ms <30 ms Turn ON threshold 9.0 Vdc Turn OFF threshold 7.6 Vdc Output Voltage adjustability (See Note 1) 0.9 - 5.0 Vdc Output setpoint accuracy 1.0% trim resistors ±3% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±1.0% Min/Max load 0 A/30A Overshoot At turn-on 1.0% max. Undershoot At turn-off 100 mV max. Ripple and noise 5 Hz to 20 MHz (See Note 2) 50 mV pk-pk 14 mV rms Transient response (See Note 3) 75 mV max. deviation 150 μs recovery to within regulation band Current share Full load ±10% All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated. Data Sheet SPECIAL FEATURES 30 A current rating Input voltage range: 10.2 - 13.8 Vdc Output voltage range: 0.9 - 5.0 V Industry-leading value Cost optimized design Excellent transient response Output voltage adjustability Path for future upgrades Supports silicon voltage migration Reduced design-in and qual time Designed-in reliability: MTBF of >4 million hours per Telcordia SR-332 Available RoHS compliant Two year warranty SAFETY UL, cUL CAN/CSA 22.2 No. 60950 UL 60690 File No. E139421 TÜV Product Service (EN60950:2000) Certificate No. B 04 08 19870 228 CB report and certificate to IEC60950-US/6415C/UL SMT30C Series C-Class Non-Isolated
Ordering Information
Number (11) Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load Notes: 1. Uses external resistor from TRIM to ground. See Application Note 170 for details. 2. Measured with external filter. See Application Note 170 for details. 4. External input fusing recommended. 5. Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6. Signal line assumed <3 m in length. 7. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8. See Application Note 170 for operation above 50 ºC. 9. See Application Note 170 for more details. 10. For redundant current sharing applications that use ORing diodes to separate the outputs, please add the suffix ‘-S’ to the part number, e.g. SMT30C-12SADJ-SJ. Please refer to Application Note 170 for further details. 11. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. Part Number System with Options SMT 30 C - 12 SADJ J Product Family SMT = Surface Mount Number of Outputs SADJ = Single Adjustable Output Performance C = Cost Optimized Input Voltage 12 = 10.2 - 13.8 Vdc Rated Output Current 30 = 30 Amps Packaging Options J = Pb free (RoHS 6/6 compliant) Output Voltage Adjustment The ultra-wide output voltage trim range offers major advantages to users who select the SMT30C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT30C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V. General Specifications Efficiency 91% Switching frequency Fixed 300 kHz Approvals and standards (See Note 7) TÜV Product Services IEC60950, UL/cUL60950 Material flammability UL94V-0 Weight 28.3 g (1 oz) Coplanarity 150 μm MTBF Telcordia SR-332 4,456,655 hours Environmental Specifications Thermal performance Operating ambient temperature -0 °C to +80 °C (See Note 8) Non-operating temperature -40 °C to +125 °C Protection Short-circuit Foldback, non latching Over-temperature Hiccup, non latching Recommended System Capacitance Input capacitance (See Note 9) 270 μF / 20 mW ESR max. Output capacitance (See Note 9) 680 μF / 10 mW ESR max.
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. SMT30C Series 09Apr2015 Mating Connectors Mechanical Drawings All dimensions in inches (mm) All tolerance ±0.010in ( ±0.25mm) unless otherwise stated 2.280 (57.91) 1.450 (36.83) PCB REF 0.062 (1.57) 0.43 (10.8) 0.105 (2.67) 0.011 (0.27) Typ0.140 (3.56) 15 x 0.090 (2.29) 2.100 (53.34) 0.045 (1.13) 0.485 (12.33) 1.140 (28.96) PIN 1 PIN 16 PIN 17 PIN 18 1.345 (3417) 2 x Seating Plane Pin Assignments Pin Function