SMT15C-05SADJJ_15 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Total Power: 50 Watts Input Voltage: 4.5 - 5.5 Vdc or 10.2 - 13.8 Vdc # of Outputs: Single Electrical Specifications Input Input voltage ra nge 4.5 - 5.5 Vdc 10.2 - 13.8 Vdc Input current Minimum load Remote OFF 65 mA 20 mA Input current (max.) (See Note 9)
5 Vin
12 Vin
11.5 A max. @ lo max. 8.1 A @ Io max. Input reflected ripple (See Note 2) 200 mA (pk-pk) 200 mA (pk-pk) Remote ON/OFF Logic compatibility ON OFF Positive logic >2.4 Vdc <0.8 Vdc Start-up time (See Note 3) Power up Remote ON/OFF <20 ms <20 ms Turn ON threshold 5 Vin
4.5 Vdc
9.3 Vdc
4.3 Vdc
7.8 Vdc
(See Note 7) 0.9 - 3.3 Vdc 0.9 - 5.0 Vdc Output setpoint accuracy 1.0% trim resistors ±2.5% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min/Max load 0 A/15 A Overshoot (at turn on) 3.0% max. 1.0% max. Undershoot At turn-off 100 mV max. Ripple and noise 5 Hz to 20 MHz (See Note 6) See table on page 2 Transient response (See Note 1) 100 mV max. deviation 150 μs recovery to within regulation band All specifications are typical at nominal input, full load at 25 °C unless otherwise stated. Data Sheet SPECIAL FEATURES 15 A current rating Input voltage range: 4.5 - 5.5 Vdc or 10.2 - 13.8 Vdc Output voltage: 0.9 - 3.3 / 5.0 V Industry-leading value Cost optimized design Excellent transient response Output voltage adjustability Path for future upgrades Supports silicon voltage migration Reduced design-in and qual time Designed-in reliability: MTBF of >7 million hours per Telcordia SR-332 Available RoHS compliant Two year warranty SAFETY UL, cUL CAN/CSA 22.2 No. 60950 UL 60690 File No. E139421 TÜV Product Service (EN60950:2000) Certificate No. B 04 08 19870 228 CB report and certificate to US/6415C/UL SMT15C Series Non-Isolated DC-DC Converter
Ordering Information
Number (12,13) Output Power (Max.) Input Voltage Output Voltage Output Current (Min.) Output Current (Max.) Efficiency (Typical) Regulation Line Load Notes: 2. Measured with external filter. See Application Note 169 for details. 3. Power up is the time from application of dc input to Power Good high. Remote ON/OFF asserted high to Power Good high. 4. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand-alone product. 5. Reserved. 6. Measured as per recommended set-up. Cin = 270 μF (20 mW ESR max.). Cout = 680 μF (10 mW ESR max.). 7. Uses external resistor from TRIM to ground. Seee Application Note 169 for details. Minimum values 485 μF for 5 V model, 280 μF for 12 V model. 8 Signal line assumed <3 m. 9. External input fusing recommended. 10. See Application Note 169 for operation above 50 ºC. 11. See Application Note 160 for more details. 12. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/power to find a suitable alternative. Part Number System with Options SMT 15 C - 12 SADJ J Product Family SMT = Surface Mount Number of Outputs SADJ = Single Adjustable Output Performance C = Cost Optimized Input Voltage 05 = 4.5 - 5.5 Vdc 12 = 10.2 - 13.8 Vdc Rated Output Current 15 - 15 A Packaging Options J = Pb free (RoHS 6/6 compliant) Output Voltage Adjustment The ultra-wide output voltage trim range offers major advantages to users who select the SMT15C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT15C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V. General Specifications Efficiency See Table below Switching frequency Fixed 200 kHz Approvals and standards (See Note 4) TÜV Product Services EN60950, UL/cUL60950 Material flammability UL94V-0 Weight 14.2 g (0.5 oz) Coplanarity 150 μm MTBF Telcordia SR-332 7,817,294 hours Environmental Specifications Thermal performance Operating ambient temperature -0 °C to +80 °C (See Note 10) Non-operating temperature -40 °C to +125 °C Protection Short-circuit Hiccup, non latching Recommended System Capacitance Input capacitance (See Note 11) 270 μF / 20 mW ESR max. Output capacitance (See Note 11) 680 μF / 10 mW ESR max. Ripple and Noise Specification Model Output Voltage Pk - Pk RMS 5 V input models 0.9 - 2.5 Vdc
3.3 Vdc
12 V input models 0.9 - 2.5 Vdc
2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 Asia (HK) 14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon Hong Kong +852 2176 3333 For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com www.artesyn.com While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. SMT15C Series 06Apr2015 Mating Connectors Mechanical Drawings All dimensions in inches (mm) All tolerance ±0.010in ( ±0.25mm) unless otherwise stated 1.20 (30.5) 1.10 (27.9) 0.062 (1.57) REF 8 X 0.105 (2.67) 0.29 (7.4 max) 0.011 (0.27) TYP 0.054 (1.38) 0.234 (5.95) 0.901 (22.88) PIN 7 PIN 8 PIN 1 PIN 6 0.956 (24.27) 0.054 (1.38) 0.150 (3.81) 0.940 (23.88) 0.145 (3.68) Seating Plane 0.457 (11.61) Installed Ht. Pin Assignments Pin Function