SL120 ARTESYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Output voltage 5V Models 4.5V to 5.5V adjustability 24V Models 18V to 26V Line regulation LL to HL, FL ±0.2% Load regulation 60% FL, ±40% SL120 ±2.0% SL220 ±1.0% Overshoot/undershoot At turn-on None Transient response SL120: +5V (12A to 20A) ±300mV, 1ms recovery SL220: +5V (10A to 20A) ±100mV, 1ms recovery Temperature coefficient SL120, all outputs ±0.03%/°C SL220, all outputs ±0.05%/°C Overvoltage protection 5V output 6.25 ±0.75V Output power limit SL120 130W min. SL220 260W min. Short circuit protection Yes INPUT SPECIFICATIONS Input voltage range User Selectable 85 to 132VAC 170 to 264VAC Input frequency range 47Hz to 440Hz Maximum input SL120: 230VAC, cold start 22A surge current SL220: 230VAC, cold start 74A Safety ground 230VAC Input, 50Hz 0.7mA leakage current GENERAL SPECIFICATIONS Hold-up Time Low line, full load SL120, 110VAC 36ms SL120, 230VAC 36ms SL220, 110VAC 20ms SL220, 230VAC 20ms Efficiency 65%, max. Isolation voltage SL220 Input/Output 1500VAC SL220 Input/Chassis 1500VAC SL120 Input/Output 3750VAC SL120 Input/Chassis 1500VAC Approvals and Safety: SL120 series VDE0805, standards EN60950, UL478 CSA bulletin No. 1402C Weight SL120 1.2kg (42.4oz) SL220 2.3kg (81.2oz) MTBF SL120 25,000 hours min. SL220 50,000 hours min. ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating, See Note 8 0°C to +70°C Non-operating –40°C to +85°C Relative humidity Non-condensing 5% to 80% RH Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. SL120: For new design-ins see the NFS110 Series instead SL220: For new design-ins see the NFS200 and LX200 Series instead SL120 and SL220 SERIES Single output [ 2 YEAR WARRANTY ]

  • 115/230 VAC input
  • UL, CSA and (VDE approved - SL120 only)
  • Short circuit protection
  • Floating output
  • 20ms hold-up time min. This series of 100 Watt to 220 Watt single output switchers use an advanced circuit topology providing superior performance at low cost. Smaller and lighter than equivalent linear supplies, they are available in 5V and 24V output versions. The floating outputs can be referenced as either positive or negative. The SL120 model is UL, CSA and VDE approved. Also, selected models incorporate remote sense. SL120/220 Series power supplies are suitable for a wide variety of applications, including front end power systems, general industrial and telecom equipment. SPECIFICATION All specifications are typical at nominal input, full load at 25 ° C unless otherwise stated PAGE 1

OUTPUT OUTPUT (1) OUTPUT (2) REGULATION (3) NOISE MODEL NUMBER POWER VOLTAGE ADJ. RANGE LINE (4) LOAD (5) PK-PK 220W 24V@9A 18 to 26V ±0.2% ±1.0% ±1.0% SL220-4624 (6) Notes

1 Peak current in excess of the maximum indicated rating may be available

on some outputs. However, this will effect output regulation. Consult factory for details. 2 Other output voltage versions available. Consult factory for details. 3 20% of rated output loading is required to ensure operation within specified regulation limits. 4 Measured from low line to high line at full load. 5 Measured at 60% full load, ±40%. 6 The SL220-4605 offers an auxiliary 24V output, rated at 2A on pin 7. The SL220-4624 offers an auxiliary 48V output, rated at 1A on pin 7. 7 Output sense will compensate for up to 3VDC load line drop. The output current limit increases with output voltage. Care must be taken not to exceed the maximum output power capability of the power supply. 8 Derate linearly from rated power at 50°C to half rated power at 70°C.

9 This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product. Mechanical notes A Dashed line indicates minimum clearance. B Connect JP1 to either E1 (110V) or E2 (220V) as required. 3.22 (81.79) ALL DIMENSIONS IN INCHES (mm) 11.50 (292.1) 2.20 (55.88) 0.250 (6.35) SL120 OUTPUT VOLTAGE ADJUSTMENT 6-32 SCREW TYP11.50 (292.10) 1.50 (38.10) PIN 1110V 6-32 THREADED INSERTS 4 PLACES - 2 MAX. DP . 3.50 (88.9) 0.67 (17.02) SL220 BEAU. INC. 72-5-09C E2 (230V) PIN 1 KULKA ELECT. 4597A-6-32-02 PIN 1 E1 (110V) 6-32 SCREW TYP 4.15 (105.41 4.65 (118.11) 11.00 (279.4) F1 5A 250V 0.156 (3.96) DIA. 4 PLACES 14.50 ± 0.02 (368.30 ± 0.06) 14.00 (355.6) 0.250 (6.35) 0.187 (4.75) DIA.

4 PLACES

1.60 (40.64) 0.87 (22.10) 2.72 (69.09) A 230V P1 P2 JP1 B 4.87 (123.70) A International Safety Standard Approvals: SL120-4605 only VDE0805/EN60950 File No. 10401-3336-1006, Licence No. 4345 UL478 Reg. File No. E131987 CSA Bulletin No. 1402C, File No. LR41062C PIN CONNECTIONS P1 SL220 Pin 1 AC Live Pin 2 AC Ground Pin 3 AC Neutral Pin 1 DC Output Pin 2 DC Output Pin 3 DC Output Pin 4 Return Pin 5 Return Pin 6 Return Pin 7 Auxiliary Output (6) Pin 8 N/C Pin 9 N/C Pin 10 +Remote Sense (7) Pin 11 –Remote Sense (7) PIN CONNECTIONS P1 SL120 Term 1 AC Ground Term 2 AC Neutral Term 3 AC Live Term 1 DC Output Term 2 DC Output Term 3 DC Output Term 4 Return Term 5 Return Term 6 Return Term 7 N/C Term 8 +Remote Sense (7) Term 9 –Remote Sense (7) 100 to 220 Watt AC/DC user-selectable input switch mode power supplies AC/DC POWER SUPPLIES | 100-220W AC PAGE 2http://www.artesyn.com