SKD-9031045030-1010-R1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
SKD-9031045030-1010-R1 Rev. 1.0 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com SPDT PIN Switch with TTL Driver, 90 to 100 GHz, Reflective Page | 1 SAGE Millimeter, Inc. Copyright © 2018 by SAGE Millimeter, Inc. Description: Model SKD-9031045030-1010-R1 is a reflective PIN diode based, single pole, double throw (SPDT) switch with a TTL driver that operates from 90 to 100 GHz. The SPDT switch requires a separate -5 V and +5 V biasing in addition to the TTL control. This model has an insertion loss of 5.0 dB typical and an isolation of 30 dB nominal at its center frequency. The SPDT switch features WR-10 waveguides with UG-387/U-M flanges at the RF input and output and a female SMA connector for TTL control on the driver. The switch can be modified for various operational frequencies under different model numbers. Features:
- Low Insertion Loss
- High Isolation Applications:
- Radar Systems
- Communication Systems
- Sensors Electrical Specifications: Parameter Minimum Typical Maximum Frequency 90 GHz 100 GHz Insertion Loss 5.0 dB Isolation 28 dB 30 dB Maximum Input Power +23 dBm +24 dBm Bias Voltage ±5 VDC Bias Current 10 mA Control Signal TTL Switching Speed 100 ns Specification Temperature +25˚C Operating Temperature -25˚C +65˚C Mechanical Specifications: Item Specification Input Port WR-10 Waveguide with UG-387/U-M Flange Output Ports WR-10 Waveguide with UG-387/U-M Flange Bias Ports Feed Through Pins TTL Control SMA (F) Case Material Aluminum Finish Gold Plated Weight 0.8 Oz Outline KD-RWM
SKD-9031045030-1010-R1 Rev. 1.0 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com SPDT PIN Switch with TTL Driver, 90 to 100 GHz, Reflective Page | 2 SAGE Millimeter, Inc. Copyright © 2018 by SAGE Millimeter, Inc. Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) -50 -45 -40 -35 -30 -25 -20 -15 -10 -20 -18 -16 -14 -12 -10 90 91 92 93 94 95 96 97 98 99 100 Isolation (dB) Insertion Loss (dB) Frequency (GHz) Typical Performance vs. Frequency (Pin= -20 dBm) Port 1 I.L. Port 2 I.L. Port Isolation
SKD-9031045030-1010-R1 Rev. 1.0 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com SPDT PIN Switch with TTL Driver, 90 to 100 GHz, Reflective Page | 3 SAGE Millimeter, Inc. Copyright © 2018 by SAGE Millimeter, Inc. Note:
- All data presented is collected from a sample lot. Actual data may vary unit to unit slightly.
- All testing was performed under +25˚C case temperature.
- Other mechanical configurations are available under different model numbers.
- SAGE Millimeter, Inc. reserves the right to change the information presented without notice. Caution:
- Exceeding absolute maximum ratings shown will damage the device.
- The switch is a static sensitive device. Always follow ESD rules when working with the switch.
- Any foreign objects in the waveguide will cause performance degradation and possible device damage. torque wrench, model SCH-08008-S1, is highly recommended.