SKD-7538533025-1212-R1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
SKD-7538533025-1212-R1 Rev. 1.2 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com SPDT PIN Switch with TTL Driver, 75 to 85 GHz, Reflective Page | 1 SAGE Millimeter, Inc. Copyright © 2018 by SAGE Millimeter, Inc. Description: Model SKD-7538533025-1212-R1 a PIN diode based, single pole, double throw (SPDT) switch with a TTL driver that operates from 75 to 85 GHz. This model has an insertion loss of 3.0 dB typical and an isolation of 25 dB nominal at its center frequency. The SPDT switch features WR-12 waveguides with UG-387/U anti-cocking flanges at the RF input and output and a female SMA connector for TTL control on the driver. The switch can be modified for various operational frequencies under different model numbers. Features:
- Low Insertion Loss
- High Isolation Applications:
- Radar Systems
- Communication Systems
- Sensors Electrical Specifications: Parameter Minimum Typical Maximum Frequency 75 GHz 85 GHz Insertion Loss 3.0 dB Isolation 25 dB Power Handling +20 dBm +23 dBm Bias Voltage ±5 VDC Bias Current 10 mA Control Signal TTL Switching Speed 100 ns Specification Temperature +25˚C Operating Temperature -25˚C +65˚C Mechanical Specifications: Item Specification Input Port WR-12 Waveguide with UG-387/U Anti-Cocking Flange Output Ports WR-12 Waveguide with UG-387/U Anti-Cocking Flange Bias Ports Feed Through Pins TTL Control Port SMA (F) Case Material Aluminum Weight 1.6 Oz Finish Gold Plated Outline KD-RE-A
SKD-7538533025-1212-R1 Rev. 1.2 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com SPDT PIN Switch with TTL Driver, 75 to 85 GHz, Reflective Page | 2 SAGE Millimeter, Inc. Copyright © 2018 by SAGE Millimeter, Inc. Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) -40 -36 -32 -28 -24 -20 -16 -12 -20 -18 -16 -14 -12 -10 75 76 77 78 79 80 81 82 83 84 85 Isolation (dB) Insertion Loss (dB) Frequency (GHz) Typical Insertion Loss and Isolation vs Frequency Input Power +/- 5Vdc Port 1 IL Port 2 IL Port 1 ISO Port 2 ISO
SKD-7538533025-1212-R1 Rev. 1.2 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com SPDT PIN Switch with TTL Driver, 75 to 85 GHz, Reflective Page | 3 SAGE Millimeter, Inc. Copyright © 2018 by SAGE Millimeter, Inc. Note:
- All data presented is collected from a sample lot. Actual data may vary unit to unit slightly.
- All testing was performed under +25˚C case temperature.
- SAGE Millimeter, Inc. reserves the right to change the information presented without notice.
- Other mechanical configurations are available under different model number. Caution:
- Exceeding absolute maximum ratings shown will damage the device.
- The device is static sensitive. Always follow ESD rules when working with the device.
- Any foreign objects in the waveguide will cause performance degradation and possible device damage.
- The case temperature of the device shall never exceed +50˚C. Use proper heatsink or fan if necessary. torque wrench, model SCH-08008-S1, is highly recommended.