SK64-0520838055-SFSF-A2 ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.1 SP64T PIN Switch with TTL Driver, Absorptive, 0.5 to 8 GHz, 6-Bit Control SK64-0520838055-SFSF-A2 is an absorptive PIN diode based, single pole, sixty-four throw switch with a TTL driver that operates between 0.5 and 8 GHz. The switch requires a separate -5 V and +5 V biasing in addition to the 6-Bit TTL control. This model offers in-line 64 output ports, typical 8 dB insertion loss, and 55 dB typical isolation with a maximum switching speed of 100 nanoseconds. The switch has SMA female connectors for all RF ports and Micro-D15 Female connector for bias and TTL control. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum Frequency 0.5 GHz 8 GHz Insertion Loss 8 dB Isolation 55 dB Return Loss 9 dB RF Input Power +27 dBm Bias (Positive) +4.75 VDC +5.00 VDC/3000 mA +5.25 VDC Bias (Negative) -5.25 VDC -5.00 VDC/60 mA -4.75 VDC Control 6-Bit TTL TTL High +2.0 VDC +5.0 VDC TTL Low 0 VDC +0.8 VDC Switching Speed 100 ns Switch Type Absorptive Specification Temperature +25 °C Operating Temperature -25 °C +85 °C Item Specification RF Ports SMA Female Bias & Control Port Micro-D15 Female Case Material Aluminum Finish Gold Plated Outline K64-AC-D15-Z1 ECCN EAR99

FEATURES

  • Low Insertion Loss
  • High Isolation
  • Absorptive
  • TTL Controlled

APPLICATIONS

  • Automatic Test Equipment
  • Switching Network SUPPLEMENTAL DETAILS

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Advanced Rev 1.1 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:

  • On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
  • On condition that simulated test data is provided, actual measured data may slightly vary.
  • Other mechanical configurations are available under different model numbers.
  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • Exceeding absolute maximum ratings shown will damage the device.
  • The switch is static sensitive device. Always follow ESD rules when working with the switch.
  • Reversing polarity will destroy the device. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.