SK6-0525038048-2F2F-A7 ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.0 SP6T PIN Switch with TTL Driver, Absorptive, 0.5 to 50 GHz SK6-0525038048-2F2F-A7 is an absorptive PIN diode based, single pole, six throw switch with a TTL driver that operates between 0.5 and 50 GHz. The switch requires a separate -5 V and +5 V biasing in addition to the 3-Bit TTL control. This model offers in-line 6 output ports, typical 8 dB insertion loss, and 48 dB typical isolation with a typical switching speed of 100 nanoseconds. The switch has 2.4 mm female connectors for all RF ports and solder pins for bias and TTL control. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum Frequency 0.5 GHz 50 GHz Insertion Loss @0.5-30 GHz 6 dB Insertion Loss @30-50 GHz 8 dB Isolation @ 0.5-30 GHz 45 dB 50 dB Isolation @ 30-50 GHz 43 dB 48 dB Return Loss 8 dB RF Input Power +20 dBm Bias (Positive) +4.75 VDC +5.00 VDC/350 mA +5.25 VDC Bias (Negative) -5.25 VDC -5.00 VDC/30 mA -4.75 VDC Control TTL TTL High +2.0 VDC +5.0 VDC TTL Low 0 VDC +0.8 VDC Switching Speed 100 ns Switch Type Absorptive Specification Temperature +25 °C Operating Temperature -25 °C +85 °C Item Specification RF Ports 2.4 mm Female Bias & Control Port Solder Pins Case Material Aluminum Finish Gold Plated Outline K6-AC-Z2 ECCN EAR99

FEATURES

  • Low Insertion Loss
  • High Isolation
  • Absorptive
  • TTL Controlled

APPLICATIONS

  • Automatic Test Equipment
  • Switching Network SUPPLEMENTAL DETAILS

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.0 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 5 10 15 20 25 30 35 40 45 50 Insertion Loss (dB) Frequency (GHz) Typical Performance vs. Frequency Insertion Loss Isolation -50 -45 -40 -35 -30 -25 -20 -15 -10 -50 -45 -40 -35 -30 -25 -20 -15 -10 0 5 10 15 20 25 30 35 40 45 50 Insertion Loss (dB) Frequency (GHz) Typical Performance vs. Frequency Input Return Loss Output Return Loss

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2024 by Eravant Final Rev 1.0 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:

  • On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
  • On condition that simulated test data is provided, actual measured data may slightly vary.
  • Other mechanical configurations are available under different model numbers.
  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • Exceeding absolute maximum ratings shown will damage the device.
  • The switch is static sensitive device. Always follow ESD rules when working with the switch.
  • Reversing polarity will destroy the device. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.