SK4-0524435060-KFKF-A3 ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 SP4T PIN Switch with TTL Driver, 0.5 to 44 GHz, Absorptive SK4-0524435060-KFKF-A3 is an absorptive PIN diode based, single pole, four throw (SP4T) switch with a TTL driver that operates between 500 MHz and 44 GHz. This model offers a typical insertion loss of 5 dB and 60 dB port-to-port isolation with a switching speed no slower than 100 nanoseconds. The switch has female K connectors for all RF ports and solder pins for DC bias and TTL control. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum Frequency 0.5 GHz 44 GHz Insertion Loss 5.0 dB Return Loss 10 dB Isolation 45 dB 60 dB Operation RF Input Power +20 dBm Damage RF Input Power +27 dBm Bias Voltage ±5 VDC Bias Current 100/50 mA Control TTL Switching Speed 100 ns Specification Temperature +25°C Operating Temperature -40°C +85°C Item Specification Input Port K(F) Output Port K(F) Bias Solder Pins Logic Input Solder Pins Case Material Brass Finish Gold Plated Weight 1.8 Oz Outline K4-AC-Z1 ECCN EAR99

FEATURES

  • Ultrabroad Bandwidth
  • High Isolation
  • Compact Size
  • Fast Control Speed

APPLICATIONS

  • 5G Systems
  • Radar Systems
  • Communication Systems
  • Automatic Test Equipment
  • Switching Network SUPPLEMENTAL DETAILS

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 Note: The insertion loss, isolation and return loss between other ports are similar to the above plots. Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 5 10 15 20 25 30 35 40 Isolation (dB) Insertion Loss and Return Loss (dB) Frequency (GHz) Typical Performance vs. Frequency Input Return Loss Insertion Loss Output Return Loss Isolation

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 NOTE:

  • On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
  • On condition that simulated test data is provided, actual measured data may slightly vary.
  • Other mechanical configurations are available under different model numbers.
  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • Exceeding absolute maximum ratings of the switch will damage the device.
  • The switch is a static sensitive device. Always follow ESD rules when working with the switch.
  • If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit.
  • Any foreign objects in the antenna will cause performance degradation and possible device damage. SCH-06004-S1 is highly recommended. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.