SHP TELEDYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

© 2009 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com SHP Page 1 SHP\\012009\\Q1 NEW Series SHP Output to 125A, 480 Vac Phase-Angle Controller Solid-State Relays NEW Series SHP Output to 125A, 480 Vac Phase-Angle Controller Solid-State Relays FEATURES/BENEFITS

  • Phase angle controller — microcontroller inside
  • Analog switching
  • Overvoltage protection by varistor
  • Green LED for input visualization
  • IP20 touch-proof fl aps
  • Designed in conformity with EN60947-4-3 (IEC947-4-3) and EN60950/VDE0805 (Reinforced Insulation) IP20 touch- proof fl aps Removable input spring connectors Gray: Supply Orange: Analog input 0–10V SHPXXNXXR relaysSHPXXNXXA relays ELECTRICAL SPECIFICATIONS (+25°C ambient temperature unless otherwise specifi ed) INPUT (CONTROL) SPECIFICATIONS SHPXXNXXR RELAYS Min Max Units Control Current Range 4 20 mA Voltage Range -0.6 7.5 V Dynamic Impedance SHP24N50R >100 m Ω SHP48N75R 150 m Ω SHP48N125R 150 m Ω Reverse Polarity Protection Yes Input Current 50 mA Part Number Load Voltage Load Current Control Range Also Requires SHP24N50A 90–280Vac 50A 0–10Vdc 8-30Vdc Supply SHP24N50R 90–280Vac 50A 4–20mA SHP48N75A 200–480Vac 75A 0–10Vdc 8-30Vdc Supply SHP48N75R 200–480Vac 75A 4–20mA SHP48N125A 200 – 480Vac 125A 0 –10Vdc 8-30Vdc Supply SHP48N125R 200 – 480Vac 125A 4 –20mA ELECTRICAL SPECIFICATIONS (+25°C ambient temperature unless otherwise specifi ed) INPUT (CONTROL) SPECIFICATIONS SHPXXNXXA RELAYS Min Max Units Control Voltage 8 30 V Supply Current 12 mA Reverse Supply Voltage 30 V Analog Voltage Range 0 10 V Analog Input Current 100 μA Reverse Analog Voltage 30 V Analog Input Impedance (Typ.) 120 k Ω

© 2009 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com SHP Page 3 SHP\\012009\\Q1 NEW Series SHP Output to 125A, 480 Vac Phase-Angle Controller Solid-State Relays NEW Series SHP Output to 125A, 480 Vac Phase-Angle Controller Solid-State Relays ELECTRICAL SPECIFICATIONS (+25°C ambient temperature unless otherwise specifi ed) OUTPUT (LOAD) SPECIFICATIONS Min Max Units Operating Range SHP24N50A 90 280 Vrms SHP24N50R 90 280 Vrms SHP48N75A 200 480 Vrms SHP48N75R 200 480 Vrms SHP48N125A 200 480 Vrms SHP48N125R 200 480 Vrms Peak Voltage (VDR Clamping) SHP24N50A 600 Vpeak SHP24N50R 600 Vpeak SHP48N75A 1200 Vpeak SHP48N75R 1200 Vpeak SHP48N125A 1200 Vpeak SHP48N125R 1200 Vpeak Latching Voltage SHP24N50A 10 V SHP24N50R 10 V SHP48N75A 20 V SHP48N75R 10 V SHP48N125A 20 V SHP48N125R 20 V Load Current Range (See Fig. 5) SHP24N50A 0.1 50 Arms SHP24N50R 0.1 75 Arms SHP48N75A 0.1 125 Arms SHP48N75R 0.1 50 Arms SHP48N125A 0.1 75 Arms SHP48N125R 0.1 125 Arms OUTPUT (LOAD) SPECIFICATIONS (Continued) Min Max Units Non-Repetitive Overload Current SHP24N50A 550 720 A SHP24N50R 550 720 A SHP48N75A 1000 1200 A SHP48N75R 1000 1200 A SHP48N125A 2000 2200 A SHP48N125R 2000 2200 A On-State Voltage Drop 0.9 V On-State Dynamic Resistance SHP24N50A 12 m Ω SHP24N50R 12 m Ω SHP48N75A 4.5 m Ω SHP48N75R 4.5 m Ω SHP48N125A 2 m Ω SHP48N125R 2 m Ω Output Power Dissipation (Max) 0.9x0.9xI + 0.012xI 2 W Off -State Leakage Current SHP24N50A 2 mA SHP24N50R 1 mA SHP48N75A 2 mA SHP48N75R 1 mA SHP48N125A 2 mA SHP48N125R 1 mA Init Time (60 Hz) 83.3 ms Delay Time (60 Hz) 16.6 ma Rise, Fall Time (60 Hz) 52.3 ma Operating Frequency 40 70 Hz Off -State dv/dt 500 V/μs Maximum di/dt (Non-Repetitive) 50 A/ μs

SHP Page 6 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2009 TELEDYNE RELAYS SHP\\012009\\Q1 NEW Series SHP Output to 125A, 480 Vac Phase-Angle Controller Solid-State Relays NEW Series SHP Output to 125A, 480 Vac Phase-Angle Controller Solid-State Relays OPTIONAL CONNECTIONS Directly with wires, with or without ferrules With tips (ring terminals) CONTROL WIRING - SHPXXNXXR Number of Wires Screwdriver Type Recommended Torque N.m Solid (no ferrule) Fine Stranded (with ferrule) Solid (no ferrule) Fine Stranded (with ferrule) AWG18…AWG14 AWG18…AWG14 AWG18…AWG14 AWG18…AWG14 Po zidriv 2 1.2 POWER WIRING Number of Wires Screwdriver Type Recommended Torque N.m Solid (no ferrule) Fine Stranded (with ferrule) Solid (no ferrule) Fine Stranded (with ferrule) AWG16…AWG8 AWG16…AWG10 AWG16…A WG8 AWG16…AWG10 Pozidriv 2 2 Power with tips W max = 12.6 mm AWG6 (16mm2) AWG4 (25mm2) AWG2/AWG3 (35mm2) AWG0/AWG1 (50mm2) Options Fastons: Call us Special kit for high current AWG2 (35mm2) AWG0 (50mm2) CONTROL WIRING - SHPCCNXXA Connector WAGO 734 Pluggable removable input spring connectors Minimum: AWG28 Maximum: AWG14 With clip

© 2009 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com SHP Page 7 SHP\\012009\\Q1 NEW Series SHP Output to 125A, 480 Vac Phase-Angle Controller Solid-State Relays NEW Series SHP Output to 125A, 480 Vac Phase-Angle Controller Solid-State Relays Mounting HIPpak SSRs must be mounted on heat sinks. A large range of heat sinks is available. For heat-sink mounting, use thermal grease or a thermal pad with high conductibility specifi ed by Teledyne. 2–2.5°C/W Teledyne P/N FW151 1.1°C/W Teledyne P/N FW108 Thermal Pad Teledyne P/N –12