SFS-04-UEB ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.1 WR-04 Subharmonically Pumped Mixer, 170 to 260 GHz SFS-04-UEB is a WR-04 subharmonically pumped mixer. The mixer is designed with high performance GaAs Schottky diodes and accepts an LO frequency at half the RF frequency to cover the frequency range from 170 to 260 GHz. With a low LO frequency range of 85 to 130 GHz, this mixer is well suited for low-cost WR-04 system solutions due to local oscillator frequency requirement. The mixer provides 30 dB 2LO to RF isolation, and 30 dB LO to IF isolation typically. The subharmonically pumped mixers in other frequency bands are offered under various model numbers. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum RF Frequency 170 GHz 260 GHz LO Frequency 85 GHz 130 GHz IF Frequency DC 5 GHz LO Pumping Power +8 dBm +10 dBm Conversion Loss 15 dB LO to IF Isolation 30 dB 2LO to RF Isolation 30 dB Combined RF and LO Power +10 dBm Specification Temperature +25°C Operating Temperature +0°C +50°C Item Specification RF Port WR-04 Waveguide with UG-387/U-M Anti-Cocking Flange LO Port WR-08 Waveguide with UG-387/U Anti-Cocking Flange IF Port 2.92 mm (F) Case Material Aluminum Finish Gold Plated Weight 0.4 Oz Outline FS-F04-A ECCN EAR99

FEATURES

  • Low LO Power Requirement
  • Subharmonic Mixing
  • Compact Package

APPLICATIONS

  • THz
  • Test Equipment SUPPLEMENTAL DETAILS

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.1 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:

  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • Exceeding absolute maximum ratings shown will damage the device.
  • The device is static sensitive. Always follow ESD rules when working with the device.
  • The IF port of the mixer is DC coupled. Use a DC block when connecting to other devices. Any external bias voltage applied to the IF port will damage the mixer. Eravant model, SCB-050-KFKM-U2, is highly recommended.
  • If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.