SFD-174264-04SF-P1-M ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 WR-04 Amplitude Detector, Positive Output SFD-174264-04SF-P1-M is a WR-04 amplitude detector that can be used in the frequency range of 170 to 260 GHz. The detector is zero biased and intended for small signal detection purposes. The detector exhibits high sensitivity characteristics across the full waveguide operating bandwidth. The detector is designed to have a 10 MHz video bandwidth and a 1 MΩ video output impedance. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum Frequency 170 GHz 260 GHz Sensitivity* 800 mV/mW RF Input Power -20 dB RF Power Handling +10 dBm Video Bandwidth 10 MHz Detection Speed, Rise Time (50 Ohm Load) 5 Nano Second Output Voltage Polarity Positive Specification Temperature +25°C Operating Temperature -40°C +85°C * Note: The sensitivity is for the input signal level -20 dBm or below. Item Specification RF Ports WR-04 Waveguide with UG-387/U-M Anti-Cocking Flange DC Port SMA (F) Case Material Aluminum Finish Gold Plated Weight 0.4 Oz Outline FD-043-A ECCN EAR99

FEATURES

  • Full Band Coverage
  • Compact Size
  • High Resolution Micrometer
  • Low Insertion Loss

APPLICATIONS

  • Test Lab
  • Instrumentations
  • System Integration SUPPLEMENTAL DETAILS

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 100 1000 10000 170 180 190 200 210 220 230 240 250 260 Sensitivity (mW/mV) Frequency (GHz) Sensitivity vs. Frequency 100 200 300 400 V out (mV) Input Power (dBm) Detected Voltage vs. Input Power

210 GHz 220 GHz 230 GHz

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:

  • All data presented is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
  • The amplitude detector is a small signal detector. The sensitivity shown is for RF signal -20 dBm or lower.
  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • Exceeding absolute maximum ratings will damage the device.
  • The device is static sensitive. Always follow ESD rules when working with the device.
  • Any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. SCH-06004-S1 is highly recommended. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.