SFD-114174-06SF-P1-M ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 WR-06 Amplitude Detector, Positive Output SFD-114174-06SF-P1-M is a WR-06 amplitude detector that can be used for full or narrow band applications. The detector is zero biased and intended for small signal detection purposes. The detector exhibits high sensitivity characteristics across the full waveguide operating bandwidth. The detector is designed to have a 10 MHz video bandwidth and a 1 MΩ video output impedance. Electrical Specifications: *Note: The sensitivity is for the input signal level -20 dBm or below. Mechanical Specifications: Parameter Minimum Typical Maximum Frequency 110 GHz 170 GHz Sensitivity* 2000 mV/mW RF Input Power -20 dBm RF Power Handling +10 dBm Video Bandwidth 10 MHz Detection Speed, Rise Time (50 Ohm Load) 5 Nano Seconds Output Voltage Polarity Positive Specification Temperature +25 ˚C Operating Temperature -40 ˚C +85 ˚C Item Specification RF Port WR-06 Waveguide with UG-387/U-M Anti-Cocking Flange DC Port SMA (F) Case Material Aluminum Finish Gold Plated Weight 0.4 Oz Outline FD-D3-A ECCN EAR99

FEATURES

  • Full Waveguide Band Operation
  • High Sensitivity

APPLICATIONS

  • Test Instrumentations
  • THz Systems SUPPLEMENTAL DETAILS

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 100 1000 10000 100000 110 120 130 140 150 160 170 Sensitivity (mV/mW) Frequency (GHz) Typical Performance vs. Frequency Pin = -20 dBm 100 150 200 250 -25 -20 -15 -10 V out (mV) Input Power (dBm) Typical Detected Voltage vs. Input Power

110 GHz

140 GHz

170 GHz

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.1 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:

  • All data presented is collected from a sample lot. Actual data may vary unit to unit.
  • All testing was performed under +25˚C case temperature.
  • The amplitude detector is a small signal detector. The sensitivity shown is for RF signal -20 dBm or lower.
  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • Exceeding absolute maximum ratings will damage the device.
  • The device is static sensitive. Always follow ESD rules when working with the device.
  • Any foreign objects in the waveguide will cause performance degradation and can possibly damage the device. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended