SFD-114174-06SF-P1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.2 D-Band Amplitude Detector, Small Signal, Positive SFD-114174-06SF-P1 is a D Band amplitude detector that can be used for full or narrow band applications. The detector is zero biased and intended for small signal detection purposes. With a distinct circuitry design and careful diode selection, the detector exhibits high sensitivity and extremely flat output characteristics across the full waveguide operating bandwidth. The detector is designed to have a 10 MHz video bandwidth and a 1 MΩ video output impedance. The minimum detectable signal level is approximately -50 dBm. Electrical Specifications: *Note: The sensitivity is for the input signal level -20 dBm or below. Mechanical Specifications: Parameter Minimum Typical Maximum Frequency 110 GHz 170 GHz Sensitivity* 300 mV/mW Sensitivity Flatness ±2.0 dB RF Input Power -20 dBm RF Power Handling +17 dBm Video Bandwidth 10 MHz Detection Speed, Rise Time (50 Ohm Load) 5 Nano Seconds Output Voltage Polarity Positive Specification Temperature +25 ˚C Operating Temperature -40 ˚C +85 ˚C Item Specification RF Port WR-06 Waveguide with UG-387/U-M Anti-Cocking Flange DC Port SMA (F) Case Material Aluminum Finish Gold Plated Weight 0.4 Oz Outline FD-D1-A ECCN EAR99
FEATURES
- Full Waveguide Band Operation
- High Sensitivity Without Tuning
- High Sensitivity Stability Over Broad Temperature Range
APPLICATIONS
- Radar Systems
- Communication Systems
- Test Instrumentations SUPPLEMENTAL DETAILS
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.2 100 1000 10000 100000 110 115 120 125 130 135 140 145 150 155 160 165 170 Sensitivity (mV/mW) Frequency (GHz) Typical Performance vs. Frequency Pin = -20 dBm 1.5 4.5 7.5 10.5 13.5 V out (mV) Input Power (dBm) Typical Detected Voltage vs. Input Power
110 GHz 140 GHz 170 GHz
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.2 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:
- All data presented is collected from a sample lot. Actual data may vary unit to unit.
- All testing was performed under +25˚C case temperature.
- The positive output voltage polarity is offered under the model number SFD-114174-06SF-N1.
- The amplitude detector is a small signal detector. The sensitivity shown is for RF signal -20 dBm or lower.
- Eravant reserves the right to change the information presented without notice. CAUTION:
- Exceeding absolute maximum ratings will damage the device.
- The device is static sensitive. Always follow ESD rules when working with the device.
- Any foreign objects in the waveguide will cause performance degradation and can possibly damage the device. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended