SFA-283323318-28SF-E1 ERVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
SFA-283323318-28SF-E1 Rev 1.0 www.eravant.com |501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@eravant.com Ka-Band, X3 Active Frequency Multiplier, 28 to 32 GHz, +18 dBm Pout Page | 1 SAGE Millimeter, Inc. Copyright © 2022 Eravant Description: Model SFA-283323318-28SF-E1 is an active X3 frequency multiplier. The multiplier triples the input signal of 9.33 to 10.66 GHz at +10 dBm to yield an output signal of 28.0 to 32.0 GHz at +18 dBm. The harmonic suppression of the mulitiplier is -20 dBc typical. The DC power requirement for the multiplier is +8 VDC at 350 mA. The input port of this model is a female SMA connector and the output port is a WR-28 Uni- Guide™ waveguide with a UG-599/U flange. It is an in-line angle configuration. Other port configurations, such as right angle, are also available under different model numbers. Features:
- High Output Power
- Low Harmonic Content Applications:
- Frequency Extenders
- Source Modules
- Communication Systems Electrical Specifications: Parameter Minimum Typical Maximum Input Frequency 9.33 GHz 10.66 GHz Input Power +10 dBm +20 dBm Output Frequency 28.00 GHz 32.00 GHz Output Power +18 dBm Harmonic Suppression -20 dBc Spurious -60 dBc Port Return Loss 10 dB DC Voltage +6 VDC +8 VDC +12 VDC DC Supply Current 350 mA Specification Temperature +25˚C Operating Temperature 0˚C +50˚C Mechanical Specifications: Item Specification Input Port SMA (F) Output Port WR-28 Uni-Guide™ Waveguide with UG-599/U Flange Bias Solder Pin Case Material Aluminum Finishing Gold Plated Weight 1.5 Oz Outline BG-SA-2CW
SFA-283323318-28SF-E1 Rev 1.0 www.eravant.com |501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@eravant.com Ka-Band, X3 Active Frequency Multiplier, 28 to 32 GHz, +18 dBm Pout Page | 2 SAGE Millimeter, Inc. Copyright © 2022 Eravant Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) 28 29 30 31 32 Harmonic Suppression (dBc) Frequency (GHz) Output Power vs. Frequency Bias: +8 VDC /350 mA; Input Power = +10 dBm
SFA-283323318-28SF-E1 Rev 1.0 www.eravant.com |501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@eravant.com Ka-Band, X3 Active Frequency Multiplier, 28 to 32 GHz, +18 dBm Pout Page | 3 SAGE Millimeter, Inc. Copyright © 2022 Eravant Note:
- All data presented is collected from a sample lot. Actual data may vary unit to unit, slightly.
- All testing was performed under +25˚C case temperature.
- The active multiplier employs SAGE Millimeter’s trademarked and patent pending technology, Uni-Guide™, as its output waveguide interface. The orientation of the output waveguides can be specified through corresponding model numbers. For example, the model number for a horizontal output waveguide configuration would be SFA-283323318-28HSF-E1 instead of the default SFA-283323318-28SF-E1 which indicates vertical orientation output.
- Eravant reserves the right to change the information presented without notice.
- Other mechanical configurations are available under different model numbers. Caution:
- Exceeding absolute maximum ratings shown will damage the device.
- The device is static sensitive. Always follow ESD rules when working with the device.
- The case temperature of the device shall never exceed +50 ˚C. Use proper heatsink or fan if necessary.
- Any foreign objects in the waveguide will cause performance degradation and may damage the device. torque wrench, model SCH-08008-S1, is highly recommended.