SFA-173333220-KFSF-S1 ERVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 X2 Active Frequency Multiplier, 17 to 33 GHz, +20 dBm Pout SFA-173333220-KFSF-S1 is an active X2 frequency multiplier. The multiplier has an input frequency of 8.5 to 16.5 GHz with a typical input power of +5 dBm and an output frequency of 17 to 33 GHz with a typical output power of +20 dBm. The multiplier also has a typical harmonic suppression of -20 dBc. The DC power requirement for the multiplier is +8 VDC/300 mA. The input port is a female SMA connector and the output is a female 2.92 mm connector. Other port configurations are available under different model numbers. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum Input Frequency 8.5 GHz 16.5 GHz Input Power +1 dBm +5 dBm +20 dBm Output Frequency 17 GHz 33 GHz Output Power +20 dBm Harmonic Suppression -20 dBc Spurious -60 dBc Port Return Loss 10 dB DC Voltage +6 VDC +8 VDC +15 VDC DC Supply Current 300 mA Specification Temperature +25°C Operating Temperature 0°C +50°C Item Specification Input Port SMA (F) Output Port 2.92 mm (F) Bias Solder Pin Case Material Aluminum Finish Gold Plated Weight 1.3 Oz Outline BG-SC-1 ECCN EAR99
FEATURES
- Wide Band Coverage
- High Output Power
- Low Harmonic Components
APPLICATIONS
- Frequency Extenders
- Source Modules SUPPLEMENTAL DETAILS
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) NOTE:
- On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
- Eravant reserves the right to change the information presented without notice.
- Other mechanical configurations are available under different model numbers. CAUTION:
- Exceeding absolute maximum ratings shown will damage the device.
- The device is static sensitive. Always follow ESD rules when working with the device.
- The case temperature of the device shall never exceed +50 ˚C. Use proper heatsink or fan if necessary.
- If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.