SDS120J010E3 SANAN | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 9
Technical content
Datasheet sections
Features
Revolutionary semiconductor material - Silicon Carbide (SiC) No reverse recovery High-speed switching performance Temperature-independent switching behavior System cost / size savings due to reduced cooling requirements Junction temperature range from -55℃ to 175℃ RoHS compliant Potential Applications Industrial power supplies: Industrial UPS Battery chargers Package Type: TO-263-2L Solar inverters Switch mode power supplies
Description
The SDS120J010E3 SiC Schottky Barrier Diode (SBD) has been developed using Sanan’s advanced 3rd generation SiC SBD technology with the highest performance and reliability. It registers higher efficiency, higher operation temperature and lower loss and can be operated at higher frequency than Si -based solutions. As to the Schottky structure, it shows no recovery at turn-off and allows a low leakage current with reverse voltage up to 1200V. It can contribute to system miniaturization and achieve lightweight system design. Using RoHS compliant components, it is qualified for use in industrial application. Product Specifications Device VRRM IF (135℃) VF (25℃) QC Marking SDS120J010E3 1200V 17A 1.35V 55nC DS120010E3
Table 1. Maximum Ratings
17 TC = 135℃
10 TC = 155℃
Table 2. Thermal Resistance
Table 3. Static Electrical Characteristics Table 4. Dynamic Electrical Characteristics
https://www.sanan-semiconductor.com/en
Package Information
Dimension unit: [mm] Symbol Min Nom Max A 4.30 4.50 4.70 A1 1.15 1.30 1.45 A2 2.20 2.40 2.90 A3 0.00 0.13 0.25 b 0.70 0.80 0.95 b1 1.20 1.27 1.36 c 0.40 0.50 0.60 D1 8.59 9.20 9.40 D4 6.60 - - E 9.66 9.90 10.28 E2 9.80 10.00 10.20 E5 7.50 - 8.50 e 5.08 BSC H 14.70 15.10 15.50 L 2.00 2.30 2.60 L1 - - 1.676 L4 0.25 BSC Ɵ 0° - 8°
https://www.sanan-semiconductor.com/en Recommended Solder Pad Layout Note: All dimensions are in mm
Ordering Information
Part number SDS120J010E3-ISARH Package TO-263-2L Unit quantity 800 EA Packing type Tape & Reel
https://www.sanan-semiconductor.com/en Important Notices – Read Carefully Before you use our products, you are requested to carefully read this document and fully understand its contents. Sanan Semiconductor Co., Ltd. shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of Sanan’s products. Sanan Semiconductor Datasheets are subject to change. Information presented in this document is from the characterization of engineering lots. Sanan Semiconductor Co., Ltd reserves the right to change limits, test conditions, and dimensions without notice. Information contained in this document are typical values and shall in no event be regarded as a guarantee of characteristics. With resp ect to any information regarding the application of the product, Sanan hereby disclaims all warranties and liabilities of any kind. The information in this document is exclusively for trained technical staff. It is the responsibility of the customer’s tech nical department to decide the suitability of the product in the customer’s application and Sanan Semiconductor Co., Ltd assumes no responsibility or liability whatsoever for the use of the information contained in this document. In case there is any clau se in this document or in any other documents which is contradictory to this clause, this clause shall prevail. This clause shall survive after termination of this document. Warning Due to technical requirements, Sanan’s products may contain dangerous subs tances. For detailed information about the substance(s), please contact the Sanan office. Sanan Semiconductor Co., Ltd bears no responsibility for any damage whatsoever due to the substance(s) used in Sanan’s products. Contact info Website: https://www.sanan-semiconductor.com/ https://www.sanan-semiconductor.com/en