SDS120J002B3 SANAN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 7

Technical content

Datasheet sections

Features

 Revolutionary semiconductor material - Silicon Carbide (SiC)  No reverse recovery  High-speed switching performance  Temperature-independent switching behavior  System cost / size savings due to reduced cooling requirements  Junction temperature range from -55℃ to 175℃  RoHS compliant Potential Applications  Industrial power supplies: Industrial UPS  Battery chargers  Solar inverters  Switch mode power supplies

Description

The SDS120J002B3 SiC Schottky Barrier Diode (SBD) has been developed using Sanan’s advanced 3rd generation SiC SBD technology with the highest performance and reliability. It registers higher efficiency, higher operation temperature and lower loss and can be operated at higher frequency than Si -based solutions. As to the Schottky structure, it shows no recovery at turn-off and allows a low leakage current with reverse voltage up to 1200V. It can contribute to system miniaturization and achieve lightweight system design. Using RoHS compliant components, it is qualified for use in industrial application. Product Specifications Device VRRM IF (135℃) VF (25℃) QC SDS120J002B3 1200V 4.9A 1.35V 12nC Cathode Anode

Table 1. Maximum Ratings

4.9 TC = 135℃

2.0 TC = 155℃

Table 2. Thermal Resistance

Table 3. Static Electrical Characteristics Table 4. Dynamic Electrical Characteristics

https://www.sanan-semiconductor.com/en Figure 5. Total capacitance charge vs. reverse voltage

Ordering Information

https://www.sanan-semiconductor.com/en Important Notices – Read Carefully Before you use our products, you are requested to carefully read this document and fully understand its contents. Hunan Sanan Semiconductor Co., Ltd. (Hunan Sanan) shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of Hunan Sanan’s products. Hunan Sanan Semiconductor Datasheets are subject to change. Information presented in this document is from the characterization of en gineering lots. Hunan Sanan reserves the right to change limits, test conditions, and dimensions without notice. Information contained in this document are typical values and shall in no event be regarded as a guarantee of characteristics. With respect to any information regarding the application of the product, Hunan Sanan hereby disclaims all warranties and liabilities of any kind. The information in this document is exclusively for trained technical staff. It is the responsibility of the customer’s techn ical department to decide the suitability of the product in the customer’s application and Hunan Sanan assumes no responsibility or liability whatsoever for the use of the information contained in this document. In case there is any clause in this documen t or in any other documents which is contradictory to this clause, this clause shall prevail. This clause shall survive after termination of this document. Warning Due to technical requirements, Hunan Sanan products may contain dangerous substances. For detailed information about the substance(s), please contact the Hunan Sanan office. Hunan Sanan bears no responsibility for any damage whatsoever due to the substance(s) used in Hunan Sanan products. Contact info Website: https://www.sanan-semiconductor.com/ https://www.sanan-semiconductor.com/en