SCL25 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Line regulation Single outputs ±0.5% LL to HL, FL Multi's: +5V output ±0.5% Multi's: aux. outputs ±1.0% Total regulation Single outputs ±4.0% No load to full load Multi's: +5V output +6.0%/-4.0% (See Note 5) Multi's: aux. outputs +7%/-5% Overshoot/Undershoot At turn on 10% Transient response +5V output ±250mV max. dev., (40% FL to 60% 1ms recovery full load step) to 1.0% Temperature coefficient ±0.02%/°C, max. Overvoltage protection +5V Output (See Note 8) 6.25V ±0.65V Output power limit Primary power limited 80W Pin max. 40W Pout min. Short circuit protection Continuous with auto-restart Green LED indicator (See Note 6) Normally ON INPUT SPECIFICATIONS Input voltage range Universal input 90 to 264VAC Input frequency range 47Hz to 63Hz Input surge current 36A max. Safety ground 110VAC, 60Hz 0.2mA leakage current 230VAC, 50Hz 0.4mA EMC CHARACTERISTICS Radiated noise EN55022, EN55011, FCC P15 Level B Conducted noise EN55022, EN55011, FCC P15 Level B Electrostatic discharge EN61000-4-2 Level 4 Electrostat. air discharge IEC801-2 Level 3 RF field susceptibility IEC801-3 Level 2 transients/bursts Surge susceptibility EN61000-4-5 Level 3 SCL25 SERIES Single and dual output [ 2 YEAR WARRANTY ]
- 6.32 x 3.35 x 1.5 inch enclosure
- 25W external power supply
- Molded UL94V-0 plastic enclosure
- Output connector options
- Stand alone ‘listed’ equipment
- Short circuit protection
- EN55022, EN55011 conducted emissions level B
- UL, CSA and VDE safety approvals
- Available RoHS compliant The SCL25 series is a 25W universal input AC/DC external power supply in a 6.32 x 3.35 x 1.5 inch plastic enclosure. The SCL25 series has a single output and dual output model in a low profile package providing a pre-approved external power solution for a host of worldwide low power portable and desktop applications. The SCL25 provides 25W of output power with free air convection cooling which can peak at 30W for 60 seconds. Standard features include universal input, short circuit protection and EN55022 conducted emissions level B. The series, with full international safety approval and the CE mark, provides pre-approved SELV outputs without the need for further safety approval or mechanical integration into the application system. The SCL25 series is designed for use in low power, and desktop data networking, computer and industrial applications requiring external power adapters in a low profile package. SPECIFICATION All specifications are typical at nominal input, full load at 25 ° C unless otherwise stated PAGE 1 GENERAL SPECIFICATIONS Hold-up time 110VAC 10ms 230VAC 60ms Efficiency 110VAC and 230VAC 70% typical Isolation voltage Input/output 3000VAC Input/chassis 1500VAC Switching frequency Variable 35kHz to 80kHz Approvals and VDE0805, EN60950 standards IEC950, UL1950, BABT CSA C22.2 No. 950 Case Material General Electric Lexan, Black Flammability rated UL94V-0 Weight 450g (15.9oz) MTBF MIL-HDBK-217F 150,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating, 0°C to +40°C full load, no derating Non-operating –40°C to +85°C 0° C to +40° C ambient, 25W convection cooled Peak (0° C to +40° C, max. 60s) 30W (See Note 3) Relative humidity Non-condensing 5% to 95% RH Altitude Operating 10,000 feet max. Non-operating 30,000 feet max. Vibration Three orthogonal axes 2.4G rms (5Hz to 500Hz) random vibration, 10 minute test for each axis
RIPPLE (4) TOTAL MODEL NUMBER (9) VOLTAGE MIN (1) MAX (2) PEAK (3) REGULATION (5) +24V (1) 0A 1.0A 1.3A 240mV ±4.0% SCL25-7624J Notes
1 Although the SCL25 models will operate with no load on the outputs,
some components temperatures increase under this condition. To maximize reliability, a minimum total load of 4W is required. 2 Natural convection cooling, 25W maximum.
3 Peak output current lasting less than 60 seconds with duty cycle less than
5%. During peak loading, output voltage may exceed total regulation limits. 4 50MHz bandwidth, peak to peak, measured differentially.
5 Total regulation is defined as the static output regulation at 25°C, including
initial tolerance, line voltage within stated limits, load currents within stated limits, and output voltages adjusted to their factor y settings. For the dual output model to maintain stated regulation: I(2) I(2) 6 The green LED is ON to indicate the pr esence of output (1). The LED tur ns off during output short circuit condition.
7 To help maintain the power supply safety approvals, the IEC320/C13 input
connector cable must be rated minimum 3.0A and appr oved by an applicable safety agency for the intended countr y of use. National and international variations on mains plugs, adapters and customer preference to lead length prevents Artesyn from supplying an IEC320/C13 (or compatible) input connector cable. The IEC320/C13 input (or compatible) connector cable can be sourced locally, e.g. Qual Electronics, Radio Shack, etc. or other non affiliated distributors.
8 Overvoltage protection is standard on the -7624J model and 5V output
(single and multiple output) models. 9 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details.
1.50 REF
(37.90 )+0.2 - 0.0 MINI DIN PLUG A A UNITS: INCHES (mm) MINI DIN PLUG
51.2 REF
(1300.00 ± 15) 7 8 VIEW A-A
3.35 REF
(85.00 )+0.4 - 0.2
6.32 REF
(160.00 )+0.3 - 0.0 G NL J301 ø 0.353 (8.97) ø 0.353 (8.97) LED (SEE NOTE 6) (1300.00±15) International Safety Standard Approvals VDE0805/EN60950/IEC950 File No. 10401-3336-1083 Licence No. 1083 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062 Certification pending geprüfte□ Sicherhelt
25 Watt AC/DC external power supplies
EXTERNAL AC/DC POWER SUPPLIES | 25W AC/DC PAGE 2http://www.artesyn.com ds_scl25_20060330.pdf Datasheet © Artesyn Technologies® 2006 The information and specifications contained in this datasheet are believed to be correct at time of publication. However , Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such pr oduct(s) or information contained herein. AMP Shielded Miniature circular DIN Plug 8 Pin P/N 749179-1 or equivalent PIN CONNECTIONS MINI DIN PLUG OUTPUT SINGLE DUAL MATING CONNECTOR PIN NO. OUTPUT OUTPUT 1V A VA 2V A VA 3V A VA 4V A VB