SCD21CDY TELEDYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

© 2002 TELEDYNE RELAYS (800) 284-7007 • www.teledynerelays.com CD 41 CD\\072002\\Q1 2A, 60Vdc Optically Isolated, Short-Circuit Protected DC Solid-State Relay

FEATURES

  • A vailable with short circuit/current overload protection
  • Available with input status monitor
  • TTL and CMOS compatible control
  • Low ON resistance power FET output
  • Fast switching speed
  • Meets 28 Vdc system requirements of MIL-STD-704
  • Optical isolation
  • Low profile hermetic ceramic package
  • Built and tested to the requirements of MIL-PRF-28750

DESCRIPTION

This all solid-state relay utilizes the latest technology to provide a low ON resistance. The control (input) and load (output) are optically isolated to protect input logic circuits from voltage and current transients which can occur on the output supply. The optical isolation also provides a full floating output, thus allowing the load to be connected to either output terminal. The control circuit is buffered to enable the relay to be driven directly from standard CMOS or open collector TTL logic circuits. Available options include short circuit and current overload protection, which provides complete protection for both the relay and the system wiring. This feature not only provides protection should a short or overload occur while the relay is on, but will also provide protection should the relay be switched into a short. In either case, the relay will sense the short circuit condition and then block it indefinitely until the short is removed and the unit is reset by cycling the input control. The second option is a status output, which provides a built-in- test function. This feature checks the input circuitry of the relay and provides a logic (0) low when the input circuit is turned on and operational. Both options are available either together or separately as standard features. Series CD Part* DESC Drawing Relay Description Number Number CD00CFW Basic Solid-State Relay (SSR) CD00CFY 90091-008 CD01CFW SSR with Control Status CD01CFY 90091-006 CD20CDW SSR with Short-Circuit Protection CD20CDY 90091-004 CD21CDW SSR with Short-Circuit Protection CD21CDY 90091-002 and Control Status * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne specifications. For surface mount (SMT), add “S” prefix to part number. Example: SCD00CFW ELECTRICAL SPECIFICATIONS (-55°C TO +105°C UNLESS OTHERWISE NOTED) INPUT (CONTROL) SPECIFICATION When used in 2 terminal configuration (TTL or direct control) (See Fig. 1) Min Typ Max Units Input Current @ VIN = 5 Vdc (See Fig. 2) 14 15 mA Turn-Off Voltage (Guaranteed Off) 1.5 Vdc Turn-On Voltage (Guaranteed On) 3.8 Vdc Reverse Voltage Protection -32 Vdc Input Supply Range (See Note 4) 3.8 6 Vdc INPUT (CONTROL) SPECIFICATION When used in 3 terminal configuration (CMOS or open collector TTL) (See Fig. 1) Min Typ Max Units Control Current VCONTROL = 5 Vdc 250 µA VCONTROL = 18 Vdc 1 mA Control Voltage Range 0 18 Vdc Bias Supply Voltage (See Note 4) 3.8 6 Vdc Bias Supply Current @ VBIAS = 5 Vdc 14 15 mA Turn-Off Voltage (Guaranteed Off) 3.2 Vdc Turn-On Voltage (Guaranteed On) 0.3 Vdc

CD 42 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2002 TELEDYNE RELAYS CD\\072002\\Q1 Series CD OUTPUT (LOAD) SPECIFICATIONS (See Note 2) Min Typ Max Units Continuous Load Current (See Fig. 3) CD20CD 1.0 Adc CD21CD 1.0 Adc CD00CF 2.0 Adc CD01CF 2.0 Adc Leakage Current @ VLOAD = 60 Vdc 40 µAdc Output Voltage Drop CD20CD 0.6 Vdc CD21CD 0.6 Vdc CD00CF 0.75 Vdc CD01CF 0.75 Vdc Continuous Operating Load Voltage 60 Vdc Transient Blocking Voltage (See Note 3) 80 Vdc ON Resistance Rds (on) at TJ = 25°C ILOAD = 100 mAdc (See Fig. 4) CD20CD 0.36 0.45 Ohm CD21CD 0.36 0.45 Ohm CD00CF 0.16 0.22 Ohm CD01CF 0.16 0.22 Ohm Turn-On Time (See Fig. 5) 1.5 ms Turn-Off Time (See Fig. 5) 0.25 ms Electrical System Spike ±600 Vdc Output Capacitance at 25 Vdc, 100 KHz 475 pF Input to Output Capacitance 10 pF Dielectric Strength 1000 Vac Insulation Resistance @ 500 Vdc 10 9 Ohm Maximum Junction Temperature (TJ Max) CD00 150 °C CD01 150 °C Thermal Resistance Junction to Ambient (θJA)8 0 °C/W Thermal Resistance Junction to Case (θJC)2 0 °C/W STATUS OUTPUT SPECIFICATIONS (CD01CF AND CD21CD) Min Typ Max Units Status Supply Voltage (See Note 7) 30 Vdc Status Leakage Current @ 15 Vdc 4 µAdc Status (sink) Current (VSO < 0.3 Vdc) 2 mAdc BLOCK DIAGRAM (BOTTOM VIEW) MECHANICAL SPECIFICATIONS