SBL-9031142250-1010-E1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
SBL-9031142250-1010-E1 Rev. 1.3 www.eravant.com | 501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com Page | 1 SAGE Millimeter, Inc. W-Band Low Noise Amplifier, 90 to 110 GHz, 22 dB Gain, 5 dB NF Copyright © 2022 by Eravant Description: Model SBL-9031142250-1010-E1 is a low noise amplifier with a typical small signal gain of 22 dB and a nominal noise figure of 5 dB across the frequency range of 90 to 110 GHz. The DC power requirement for the amplifier is +8 VDC/50 mA. The mechanical configuration offers an in line structure with WR-10 waveguides and UG-387/U- M anti-cocking flanges. Other port configurations, such as with 1 mm connectors or a right angle structure with WR-10 waveguides, are also available under different model numbers. Features:
- State-of-the-Art Noise Figure
- Broadband Performance
- High Gain Applications:
- Low Noise Receivers
- Communication Systems
- Test Equipment Electrical Specifications: Parameter Minimum Typical Maximum Frequency 90 GHz 110 GHz Gain 22 dB Noise Figure 5 dB P1dB -5 dBm Pin +15 dBm Input Return Loss 8 dB Output Return Loss 6 dB DC Voltage +6 VDC +8 VDC +15 VDC DC Supply Current 50 mA Specification Temperature +25 ˚C Operating Temperature 0 ˚C +50 ˚C Mechanical Specifications: Item Specification Input Port WR-10 Waveguide with UG-387/U-M Anti-Cocking Flange Output Port WR-10 Waveguide with UG-387/U-M Anti-Cocking Flange Bias Port Solder Pin Case Material Aluminum Finish Gold Plated Weight 1.6 Oz Outline BG-SW-2-A
SBL-9031142250-1010-E1 Rev. 1.3 www.eravant.com | 501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com Page | 2 SAGE Millimeter, Inc. W-Band Low Noise Amplifier, 90 to 110 GHz, 22 dB Gain, 5 dB NF Copyright © 2022 by Eravant -20 -15 -10 -20 -15 -10 90 95 100 105 110 Return Loss (dB) Gain (dB) Frequency (GHz) Typical Gain and Return Loss vs. Frequency Bias: +8 VDC/50 mA Gain Input Return Loss Output Return Loss 90 95 100 105 110 Noise Figure (dB) Frequency (GHz) Typical Noise Figure vs. Frequency Bias: +8VDC/50 mA
SBL-9031142250-1010-E1 Rev. 1.3 www.eravant.com | 501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com Page | 3 SAGE Millimeter, Inc. W-Band Low Noise Amplifier, 90 to 110 GHz, 22 dB Gain, 5 dB NF Copyright © 2022 by Eravant Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) -20 -15 -10 75 80 85 90 95 100 105 110 P1dB (dBm) Frequency (GHz) Typical P1dB vs. Frequency Bias: +8V/50 mA
SBL-9031142250-1010-E1 Rev. 1.3 www.eravant.com | 501 Amapola Avenue, Torrance, CA 90501 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: support@eravant.com Page | 4 SAGE Millimeter, Inc. W-Band Low Noise Amplifier, 90 to 110 GHz, 22 dB Gain, 5 dB NF Copyright © 2022 by Eravant Note:
- All data presented is collected from a sample lot. Actual data may vary unit to unit.
- All testing was performed under +25 ˚C case temperature.
- Eravant reserves the right to change the information presented without notice.
- Other mechanical configurations are available under different model numbers. Caution:
- Exceeding absolute maximum ratings shown will damage the device.
- The device is static sensitive. Always follow ESD rules when working with the device.
- The case temperature of the device shall never exceed +50 ˚C. Use proper heatsink or fan if necessary.
- Any foreign objects in the waveguide will cause performance degradation and may damage the device.