SBL-7531143550-101F-E1-WC ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

SBL-7531143550-101F-E1-WC Rev. 1.1 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com Page | 1 SAGE Millimeter, Inc. W-Band Low Noise Amplifier, 75 to 110 GHz, 35 dB Gain, 5 dB NF Copyright © 2019 by SAGE Millimeter, Inc. Description: Model SBL-7531143550-101F-E1-WC is a W band low noise amplifier with a typical small signal gain of 35 dB and a nominal noise figure of 5 dB across the frequency range of 75 to 110 GHz. The DC power requirement for the amplifier is +8 VDC/100 mA. The output port configuration is a female 1 mm connector with the inclusion of a waveguide to coaxial adapter (SWC-101F-E1) and the input is a WR-10 waveguide with a UG-387/U-M anti-cocking flange. Other port configurations are available under different model numbers. Features:

  • Full Waveguide Band Coverage
  • State-of-the-Art Noise Figure Performance
  • High Gain Applications:
  • Radar Systems
  • Communication Systems
  • Low Noise Receivers Electrical Specifications: Parameter Minimum Typical Maximum Frequency 75 GHz 110 GHz Gain 35 dB Noise Figure 5 dB Pin +15 dBm P1dB -5 dBm Input/Output Return Loss 6 dB DC Voltage +6 VDC +8 VDC +15 VDC DC Supply Current 100 mA Specification Temperature +25 ˚C Operating Temperature 0 ˚C +50 ˚C Mechanical Specifications: Item Specification Input Port WR-10 Waveguide with UG-387/U-M Anti-Cocking Flange Output Port 1 mm Female Bias Solder Pin Case Material Aluminum Finish Gold Plated Weight 1.9 Oz Outline BG-SW-2WC-A-WC

SBL-7531143550-101F-E1-WC Rev. 1.1 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com Page | 2 SAGE Millimeter, Inc. W-Band Low Noise Amplifier, 75 to 110 GHz, 35 dB Gain, 5 dB NF Copyright © 2019 by SAGE Millimeter, Inc. -20 -15 -10 -20 -15 -10 75 80 85 90 95 100 105 110 Return Loss (dB) Gain (dB) Frequency (GHz) Typical Gain and Return Loss vs. Frequency Bias: +8 VDC/79 mA Gain Input Return Loss Output Return Loss 75 80 85 90 95 100 105 110 Noise Figure (dB) Frequency (GHz) Typical Noise Figure vs. Frequency Bias: +8VDC/79 mA

SBL-7531143550-101F-E1-WC Rev. 1.1 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com Page | 3 SAGE Millimeter, Inc. W-Band Low Noise Amplifier, 75 to 110 GHz, 35 dB Gain, 5 dB NF Copyright © 2019 by SAGE Millimeter, Inc. Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) -20 -18 -16 -14 -12 -10 75 80 85 90 95 100 105 110 P1dB (dBm) Frequency (GHz) Typical P1dB vs. Frequency Bias: +8 V/100 mA

SBL-7531143550-101F-E1-WC Rev. 1.1 www.sagemillimeter.com | 3043 Kashiwa Street, Torrance, CA 90505 Phone: 424-757-0168 | Fax: 424-757-0188 | Email: sales@sagemillimeter.com Page | 4 SAGE Millimeter, Inc. W-Band Low Noise Amplifier, 75 to 110 GHz, 35 dB Gain, 5 dB NF Copyright © 2019 by SAGE Millimeter, Inc. Note:

  • All data presented is collected from a sample lot. Actual data may vary unit to unit.
  • All testing was performed under +25 ˚C case temperature.
  • SAGE Millimeter, Inc. reserves the right to change the information presented without notice.
  • Other mechanical configurations are available under different model numbers. Caution:
  • Exceeding absolute maximum ratings shown will damage the device.
  • The device is static sensitive. Always follow ESD rules when working with the device.
  • The case temperature of the device shall never exceed +50 ˚C. Use proper heatsink or fan if necessary.
  • Any foreign objects in the waveguide will cause performance degradation and possible device damage. torque wrench, model SCH-06004-S1, is highly recommended.