SBL-6039033065-1F12-E1-WC ERAVANT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 E-Band Low Noise Amplifier, 30 dB Gain, 6.5 dB NF SBL-6039033065-1F12-E1-WC is a low noise amplifier with a typical small signal gain of 30 dB and a nominal noise figure of 6.5 dB across the frequency range of 60 to 90 GHz. The DC power requirement for the amplifier is +8 VDC/190 mA. The mechanical configuration offers an in line structure with WR-12 UG-387/U flanges and 1 mm female connector. Other port configurations, such as a right angle structure with WR-12 waveguides, are also available under different model numbers. Electrical Specifications: Mechanical Specifications: Parameter Minimum Typical Maximum Frequency 60 GHz 90 GHz Gain 30 dB Noise Figure 6.5 dB P1dB +12 dBm Pin +15 dBm Input Return Loss 8 dB Output Return Loss 8 dB DC Voltage +6 VDC +8 VDC +15 VDC DC Supply Current 190 mA Specification Temperature +25°C Operating Temperature 0°C +50°C Item Specification Input Port 1 mm (F) Connector Output Port WR-12 Waveguide with UG-387/U Flange Bias Solder Pin Case Material Aluminum Finish Gold Plated Weight 1.9 Oz Outline BG-SE-2CW-WC ECCN 3A001.b.4

FEATURES

  • Full Waveguide Band Performance
  • State-of-the-Art Noise Figure
  • High Gain

APPLICATIONS

  • Radar Systems
  • Communication Systems
  • Low Noise Receivers SUPPLEMENTAL DETAILS

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 -20 -15 -10 -20 -15 -10 60 65 70 75 80 85 90 Return Loss (dB) Gain (dB) Frequency (GHz) Gain and Return Loss vs. Frequency Bias: +8 VDC/234 mA Gain Input Return Loss Output Return Loss 60 65 70 75 80 85 90 P1dB (dBm) Frequency (GHz) P1dB vs. Frequency Bias: +8 VDC/234 mA RFsat: +8 Vdc/ 300 mA

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 Mechanical Outline: (Unless otherwise specified, all dimensions are in inches [millimeters]) 60 65 70 75 80 85 90 Noise Figure (dB) Frequency (GHz) Noise Figure vs. Frequency Bias: +8VDC/ 234 mA

www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Advanced Rev 1.0 NOTE:

  • On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C room temperature.
  • On condition that simulated test data is provided, actual measured data may slightly vary.
  • Other mechanical configurations are available under different model numbers.
  • Eravant reserves the right to change the information presented without notice. CAUTION:
  • Exceeding absolute maximum ratings will damage the device.
  • The device is static sensitive. Always follow ESD rules when working with the device.
  • The case temperature of the device shall never exceed +50 C°. Use proper heatsink or fan if necessary.
  • If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit. SCH-06004-S1 is highly recommended. (0.90 ± 0.02 Nm). Torque wrench model SCH-08008-S1 is highly recommended.