SBL-1442043070-0505-E1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Advanced Rev 1.0 SBL-1442043070-0505-E1 WR-05 Low Noise Amplifier, 140 to 200 GHz, 30 dB Gain, 7 dB NF SBL-1442043070-0505-E1 is a WR-05 low noise amplifier with a typical small signal gain of 30 dB and a nominal noise figure of 7.0 dB across the frequency range of 140 to 200 GHz. The DC power requirement for the amplifier is +8 VDC/80 mA. The input and output port configuration offers an inline structure with WR- 05 waveguides and UG-387/U-M anti-cocking flanges.
FEATURES
- State-of-the-Art Noise Figure
- Low Power Consumption
APPLICATIONS
- 6G Systems Parameter Minimum Typical Maximum Frequency Range 140 GHz 200 GHz Gain 30 dB Noise Figure 7.0 dB P1dB -5 dBm Pin 10 dBm Input Return Loss 6 dB Output Return Loss 10 dB DC Voltage +8 VDC +12 VDC DC Supply Current 80 mA Specification Temperature +25 ˚C Operation Temperature 0 ˚C +50 ˚C SUPPLEMENTAL DETAILS Electrical Specifications: Item Specification Input WR-05 Waveguide with UG-387/U-M Anti-Cocking Flange Output WR-05 Waveguide with UG-387/U-M Anti-Cocking Flange Bias Solder Pin Case Material Aluminum Finish Gold Plated Weight 1.6 oz Outline BG-SG-2-A Mechanical Specifications: 3A001.b.4 ECCN www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2022 by Eravant
2 x 0.13 3.2 0.75 19.1 CL CL
2 X WR-05 WAVEGUIDE
W/ UG-387/U-M ANTI-COCKING FLANGE 1.00 25.4 1.40 35.6 0.28 7.1 CL BIAS GND 4 x 4-40 UNC - 2B 0.20 5.1 2 x 1.20 30.5 2 x 0.80 20.3 CL CL CL CL
- On condition that test data is provided it is collected from a sample lot. Actual data may vary slightly from unit to unit. All testing is performed under +25 °C case temperature.
- On condition that simulated test data is provided, actual measured data may slightly vary.
- Eravant reserves the right to change the information presented without notice.
- If a waveguide is present, any foreign objects in the waveguide will cause performance degradation and may damage or destroy the unit.
- Any foreign objects in the device will cause performance degradation and possible device damage.
- Exceeding absolute maximum ratings shown will damage the device.The device is static sensitive. Always follow ESD rules when working with the device.
- The case temperature of the device shall never exceed +50 ˚C. Use proper heatsink or fan if necessary. Torque wrench model SCH-06004-S1 is highly recommended.
- For 1.35 mm, 1.85 mm, 2.4 mm, 2.92 mm, and SMA connectors proper torque should be recommended. NOTE: CAUTION: Mechanical Outline: Unless otherwise specified, all dimensions are in inches [millimeters]) SBL-1442043070-0505-E1 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2022 by Eravant