SAJ-135-S1 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.3 Trihedral Corner Reflector, 13.5” SAJ-135-S1 is a 13.5” x 13.5” x 13.5” trihedral corner reflector, featuring a rugged aluminum construction with a gold chemical film finish. The trihedral reflector simulates radar target precisely and is widely used for Radar system calibration. With a ¼-20 threaded hole for a built in mounting bracket, the reflector can be mounted onto a tripod for rapid system setups. Mechanical Specifications: Item Specification Mounting ¼-20 Threaded Hole Material Aluminum Finish Gold Chem Film Weight 4.9 lbs Edge Length 13.5” Outline AJ-S-13.5 ECCN EAR99
FEATURES
- Compact Size
- High RCS
- Rugged Configuration
APPLICATIONS
- Radar Target Simulator
- Radar System Evaluation
- Radar System Calibration SUPPLEMENTAL DETAILS
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.3 Mechanical Outline: Unless otherwise specified, all dimensions are in inches [millimeters] 160 320 480 640 800 960 1120 1280 1440 1600 10 20 30 40 50 60 70 80 90 100 Relative Magnitue (dBsm) Radar Cross Section (m^2) Frequency (GHz) Calculated Radar Cross Section and Relative Magnitude Radar Cross Section Relative Magnitude
www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.3 NOTE:
- On condition that simulated test data is provided, actual measured data may slightly vary.
- Eravant reserves the right to change the information presented without notice.
- For more information on corner reflectors, an informative blog is provided here: https://www.eravant.com/corner-reflectors
- To calculate the RCS and relative magnitude for a specific frequency, an online calculator is provided here: https://www.eravant.com/corner-reflector-calculator SHARP METAL EDGES - SEVERE INJURY RISK
- Handle with extreme caution. Sharp and pointed metal edges can cause severe cuts, punctures, or bodily injury.
- Wear heavy-duty gloves and appropriate protective equipment during handling, assembly, and installation.
- Use care to prevent slips, falls, or accidental contact with the product.
- Do not leave unattended in areas accessible to children or unauthorized personnel.
- Ensure product is securely stored or mounted to minimize risk of accidents.
- Failure to follow these warnings could result in serious injury.
- Eravant assumes no responsibility for injuries resulting from improper handling, installation, or storage of this product.