SAJ-007-S1-0.71 ERAVANT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
SAJ-007-S1-0.71 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.4 Trihedral Corner Reflector, 18 mm SAJ-007-S1-0.71 is an 18 mm x 18 mm x 18 mm trihedral corner reflector, featuring a rugged aluminum construction with a clear chemical film finish. The trihedral reflector simulates radar target precisely and is widely used for radar system calibration. With an 8-32 threaded hole for a built-in mounting bracket, the reflector can be mounted onto a tripod for rapid system setups. Mechanical Specifications: Item Specification Mounting 8-32 Threaded Hole Material Aluminum Finish Clear Chem Film Weight 0.14 Oz Edge Length 0.71” [18 mm] Outline AJ-S-0.71-RC ECCN EAR99
FEATURES
- Compact Size
- High RCS
- Rugged Configuration
APPLICATIONS
- Radar Target Simulator
- Radar System Evaluation
- Radar System Calibration SUPPLEMENTAL DETAILS
SAJ-007-S1-0.71 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.4 Mechanical Outline: Unless otherwise specified, all dimensions are in inches [millimeters] -40 -35 -30 -25 -20 -15 0.002 0.004 0.006 0.008 0.01 0.012 0.014 10 20 30 40 50 60 70 80 90 100 Relative Magnitue (dBsm) Radar Cross Section (m^2) Frequency (GHz) Calculated Radar Cross Section and Relative Magnitude Radar Cross Section Relative Magnitude
SAJ-007-S1-0.71 www.eravant.com | 424-757-0168 | support@eravant.com Copyright © 2023 by Eravant Final Rev 1.4 SHARP METAL EDGES - SEVERE INJURY RISK
- Handle with extreme caution. Sharp and pointed metal edges can cause severe cuts, punctures, or bodily injury.
- Wear heavy-duty gloves and appropriate protective equipment during handling, assembly, and installation.
- Use care to prevent slips, falls, or accidental contact with the product.
- Do not leave unattended in areas accessible to children or unauthorized personnel.
- Ensure product is securely stored or mounted to minimize risk of accidents.
- Failure to follow these warnings could result in serious injury.
- Eravant assumes no responsibility for injuries resulting from improper handling, installation, or storage of this product. NOTE:
- On condition that simulated test data is provided, actual measured data may slightly vary.
- Eravant reserves the right to change the information presented without notice.
- For more information on corner reflectors, an informative blog is provided here: https://www.eravant.com/corner-reflectors
- To calculate the RCS and relative magnitude for a specific frequency, an online calculator is provided here: https://www.eravant.com/corner-reflector-calculator