S114 TELEDYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

© 2022 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 1 Series S114 SMT, DPDT Non-Latching Commercial Electromechanical Relay S114_2022 SERIES RELAY TYPE S114 DPDT, surface-mount w/ J-Leads, non-latching relay S114D DPDT, SMT w/ J-Leads, non-latching relay with internal diode for coil transient suppression

DESCRIPTION

The Series S114 Surface Mount Centigrid® Relay is an ultraminiature, hermetically sealed, armature relay. The low profile height (.360”) and .100” lead spacing make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The specially formed leads are pre-tinned to make the relays ideal for most types of surface mount solder reflow processes. The basic design and internal construction are identical to the Series

114 Centigrid® relays, and are capable of meeting Teledyne Relays’

T2R® requirements. The following unique construction features and manufacturing techniques provide overall high reliability and excellent resistance to environmental extremes: The S114 feature:

  • All welded construction.
  • Unique uni-frame design providing high magnetic efficiency and mechanical rigidity.
  • High force/mass ratios for resistance to shock and vibration.
  • Advanced cleaning techniques provide maximum assurance of internal cleanliness.
  • Precious metal alloy contact material with gold plating assures excellent high current and dry circuit switching capabilities. The Series S114D relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. INTERNAL CONSTRUCTION CENTIGRID ® SURFACE MOUNT COMMERCIAL RELAYS DPDT ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Operating) –55°C to +85°C Vibration (Note 1) 30 g’s to 3000 Hz Shock (Note 1) 50 g’s, 6ms half sine Acceleration 50 g’s Enclosure Hermetically sealed Weight 0.15 oz. (4.3g) max. Reflow Temperature 260°C max. temp. 1 min. max

Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2022 TELEDYNE RELAYS Series S114 SMT, DPDT Non-Latching Commercial Electromechanical Relay S114_2022 GENERAL ELECTRICAL SPECIFICATIONS (-55 °C to 85 °C unless otherwise noted. See notes 2 & 3.) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.10 Ω max. Contact Load Rating (DC) Resistive: 1 A / 28 Vdc Inductive: 200 mA / 28 Vdc (320mH) Lamp: 100 mA / 28 Vdc (320mH) Low level: 10 to 50 μA @ 10 to 50 mV Contact Load Rating (AC) Resistive: 250 mA / 115Vac, 60 and 400 Hz (Case not grounded) 100 mA / 115 Vac, 60 and 400 Hz (Case grounded) Contact Life Ratings 10,000,000 cycles (typical) at low level 1,000,000 cycles (typical) at 0.5 A / 28 Vdc resistive 100,000 cycles min. at all other loads specified above Contact Overload Rating 2 A / 28 Vdc Resistive (100 cycles min.) Coil Operating Power 450 mW typical at nominal rated voltage Contact Carry Rating Contact Factory Operate Time 2.0 ms max. @ nominal rated coil voltage Release Time S114: 1.5 ms max. S114D: 4.0 ms max. Contact Bounce 1.5 ms max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 10,000 MΩ min. between mutually isolated terminals Dielectric Strength 500 Vrms (60 Hz) @ atmospheric pressure Negative Coil Transient (Vdc) 1.0 Vdc Max. Diode P.I.V. (Vdc) 100 Vdc Min. NOTES: 1. Relay contacts will exhibit no chatter in excess of 10 μs or transfer in excess of 1 μs. 2. “Typical” characteristics are based on available data and are best estimates. No on-going verification tests are performed. 3. Unless otherwise specified, parameters are initial values. 4. Unless otherwise specified, relays will be supplied with solder-plated leads. 5. The slash and characters appearing after the slash are not marked on the relay. 6. Measured at nominal voltage for 5 sec. max. S114 - 26 / R Relay Series S114 S114D Lead Finish Q = Solder-Coated Leads (Sn60 / Pb40) R = RoHS Compliant Solder (Sn99.3/Cu0.7) Coil Voltage 5 = 5V 12 = 12V 26 = 26.5V Part Numbering System (Notes 4 & 5)

Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2022 TELEDYNE RELAYS Series S114 SMT, DPDT Non-Latching Commercial Electromechanical Relay S114_2022 OUTLINE DIMENSIONS SCHEMATIC DIAGRAMS S114 S114D Dimensions are shown in Inches (Millimeters) (Viewed From Terminals) .335 MAX (8.51) .031 REF (.79) 4° MAX TYP 4° MAX TYP .035 REF (.89) .200 (5.08) .375 SQ MAX (9.53) .045 MIN 8 PL (1.14) .100 4 PL (2.54) .200 (5.08) .410 MIN (10.41) .200 (5.08) .100 TYP (2.54) (Note 6) .275 MAX (6.99) .360 MAX (9.14) Ø.017 REF (.43) 2° ±2° TYP .378 +.030 –.020 TYP 9.60 +.76 –.51() .335 MAX (8.51) .031 REF (.79) 4° MAX TYP 4° MAX TYP .035 REF (.89) .200 (5.08) .375 SQ MAX (9.53) .045 MIN 8 PL (1.14) .100 4 PL (2.54) .200 (5.08) .410 MIN (10.41) .200 (5.08) .100 TYP (2.54) (Note 6) .275 MAX (6.99) .360 MAX (9.14) Ø.017 REF (.43) 2° ±2° TYP .378 +.030 –.020 TYP 9.60 +.76 –.51() 5 4 3 5 4 3 .335 MAX (8.51) .031 REF (.79) 4° MAX TYP 4° MAX TYP .035 REF (.89) .200 (5.08) .375 SQ MAX (9.53) .045 MIN 8 PL (1.14) .100 4 PL (2.54) .200 (5.08) .410 MIN (10.41) .200 (5.08) .100 TYP (2.54) (Note 6) .275 MAX (6.99) .360 MAX (9.14) Ø.017 REF (.43) 2° ±2° TYP .378 +.030 –.020 TYP 9.60 +.76 –.51()