RT6N140C ISAHAYA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
DESCRIPTION
RT6N140C is a silicon NPN epi taxial type transistor. This product is most suitable for muting circuit , switching circuit because of low on resistance , small c o l l e c t o r t o e m i t t e r s a t u r a t i o n v o l t a g e . FEATURE
- Small package for easy mounting.
- High reverse hFE
- Small collector to emitter saturation voltage VCE(sat)=30mV(TYP.)(@IC=50mA/IB=2.5mA)
- Low on Resistance Ron=0.7Ω(TYP.)(@VI=5V) APPLICATION muting circuit、switching circuit 〈SMALL-SIGNAL TRANSISITOR〉 RT6N140C TRANSISTOR WITH RESISTOR FOR MUTING APPLICATION SILICON NPN EPITAXIAL TYPE EQUIVALENT CIRCUIT O U T L I N E D R A W I N G U n i t : m m JEITA:SC-59 TERMINAL CONNECTOR ①:BASE ②:EMITTER ③:COLLECTOR 0.16 0~0.1 0.8 1.1 0.4 0.5 1.50.5 2.5 0.95 0.9 5 1.90 2.9 ② ③ MAXIMUM RATINGS(Ta=25℃) Symbol Parameter Ratings Unit VCBO Collector to Base voltage 40 V VEBO Emitter to Base voltage 40 V VCEO Collector to Emitter voltage 20 V IC Collector current 600 mA PC Peak Collector current 200 mW Tj Collector dissipation(Total Ta=25℃) +150 ℃ Tstg Junction temperature -55~+150 ℃ ISAHAYA ELECTRONICS CORPORATION C (OUT) E (GND) B (IN)
〈SMALL-SIGNAL TRANSISITOR〉 RT6N140C TRANSISTOR WITH RESISTOR FOR MUTING APPLICATION SILICON NPN EPITAXIAL TYPE ELECTRICAL CHARACTERISTICS(Ta=25℃) Limits Parameter Symbol Test conditions Min Typ Max Unit C to B break down voltage V( BR)CBO I C=50μA,I E=0mA 40 V E to B break down voltage V( BR)EBO I E=50μA,I C=0mA 40 V C to E break down voltage V( BR)CEO I C=1mA,R BE=∞ 20 V Collector cut off current I CBO V CB=40V, I E= 0 m A - - 0 . 5 μ A Emitter cut off current I EBO V EB=40V, I C=0mA - - 0.5 μA DC forward current gain hFE V CE=5V ,I C=50mA 820 - 2500 - C to E saturation voltage V CE(sat) I C=50mA ,I B=2.5mA - 30 150 mV Input resistor R1 - 7 10 13 kΩ Gain band width product fT V CE=10V, I E=-50mA, f=100MHz - 130 - MHz Output “ON” resistance Ron V I=7V, R L=1kΩ, f=1MHz - 0.7 - Ω ISAHAYA ELECTRONICS CORPORATION
Marketing division, Marketing planning department 6 -41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan Keep safety first in your circuit designs!
- ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility th at trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as ( 1) placement of substitutive, auxiliary, (2) use of non-farmable material or ( 3) prevention against any malfunction or mishap. Notes regarding these materials
- These materials are intended as a reference to our customers in the selection of the ISAH AYA products best suited to the customer’s application; they don't convey any license under any intellectual prop erty rights, or any other rights, belonging ISAHAYA or third party.
- ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights , originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials.
- All information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, a nd are subject to change by ISAHAYA Electronics Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing product listed herein.
- ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human lif e is potentially at stake. Please contact ISAHAYA electronics corporation or an authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transpor tation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
- The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these materials.
- If these products or technolo gies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or re -export contrary to t he export control laws and regulations of Japan and/or the country of destination is prohibited.
- Please contact ISAHAYA Electronics Corporation or authorized ISAHAYA products distributor for further details on these materials or the products contained therein. Jan.2003