RF300 TELEDYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

© 2021 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 1 Series RF300/RF303 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps RF300RF303\\02021 SERIES RELAY TYPE RF300 Repeatable, RF relay RF300D Repeatable, RF relay with internal diode for coil transient suppression RF300DD Repeatable, RF relay with internal diodes for coil transient suppression and polarity reversal protection RF303 Sensitive, repeatable, RF relay RF303D Sensitive, repeatable, RF relay with internal diode for coil transient suppression RF303DD Sensitive, repeatable, RF relay with internal diodes for coil transient suppression and polarity

DESCRIPTION

The ultraminiature RF300and RF303 relays are designed to provide improved RF signal switching repeatability over the frequency range. These relays are engineered for use in RF attenuator, RF switch matrices, ATE and other applications that require dependable high frequency signal fidelity and performance. The RF300 and RF303 features:

  • High repeatability
  • Broader bandwidth
  • Metal enclosure for EMI shielding
  • High isolation between control and signal paths
  • High resistance to ESD The following unique construction features and manufacturing techniques provide excellent robustness to environmental extremes and overall high reliability:
  • Uniframe motor design provides high magnetic efficiency and mechanical rigidity
  • Minimum mass components and welded construction provide maximum resistance to shock and vibration
  • Advanced cleaning techniques provide maximum assurance of internal cleanliness
  • Hermetically sealed
  • Solder Dipped Leads, (RoHS compliant solder option available) The Series RF300D/RF303D and RF300DD/RF303DD relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. This hybrid package reduces required PC board floor space by reducing the number of external components needed to drive the relay. HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Ambient) Storage –65°C to +125°C Operating –55°C to +85°C Vibration (Note 1) 10 g’s to 500 Hz Shock (Note 1) 30 g’s, 6ms half sine Enclosure Hermetically sealed Weight RF300 0.09 oz. (2.55g) max. RF303 0.16 oz. (4.5g) max. INTERNAL CONSTRUCTION UPPER STATIONARY CONTACT MOVING CONTACT LOWER STATIONARY CONTACT UNI-FRAME ARMATURE

Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2021 TELEDYNE RELAYS Series RF300/RF303 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps RF300RF303\\072021 GENERAL ELECTRICAL SPECIFICATIONS (@25 °C) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.15 Ω max. Contact Load Rating Resistive: 1Amp/28Vdc Low level: 10 to 50 μA @ 10 to 50 mV Contact Life Ratings 10,000,000 cycles (typical) at low level Coil Operating Power RF300-5: 500 mW @ nominal coil RF300-12: 370 mW @ nominal coil RF303-5: 250 mW @ nominal coil RF303-12: 169 mW @ nominal coil Operate Time RF300: 4.0 ms max. RF303: 6.0 ms max. Release Time RF300: 3.0 mS max. RF300D, RF300DD: 4.0 ms max. RF303: 3.0 ms RF303D, RF303DD: 7.5 ms max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 1,000 MΩ min. between mutually isolated terminals Dielectric Strength 350 Vrms (60 Hz) @ atmospheric pressure Negative Coil Transient (Vdc) RF300D/RF303D,RF300DD/RF303DD 1.0 max Diode P.I.V. (Vdc) RF300D/RF303D,RF300DD/RF303DD 100 min. DETAILED ELECTRICAL SPECIFICATIONS (@25°C) BASE PART NUMBERS (RF303, RF303D, RF303DD) RF303-5 RF303D-5 RF303DD-5 RF303-12 RF303D-12 RF303DD-12 Coil Voltage, Nominal (Vdc) 5.0 12.0 Coil Resistance (Ohms ±20%) RF303, RF303D 100 850 RF303DD (Note 2) 64 850 Coil Current (mAdc@ 25 °C) (RF303DD Series) Min. 56.8 11.7 Max. 78.1 15.0 Pick-up Voltage (Vdc max.) RF303, RF303D, 3.6 9.0 RF303DD 3.7 11.0 BASE PART NUMBERS (RF300, RF300D, RF300DD) RF300-5 RF300D-5 RF300DD-5 RF300-12 RF300D-12 RF300DD-12 Coil Voltage, Nominal (Vdc) 5.0 12.0 Coil Resistance (Ohms ±20%) RF300, RF300D 50 390 RF300DD (Note 2) 39 390 Coil Current (mAdc@ 25 °C) (RF300DD Series) Min. 93.2 25.6 Max. 128.2 32.8 Pick-up Voltage (Vdc max.) RF300, RF300D, 3.6 9.0 RF300DD 3.9 10.0

© 2021 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 3 Series RF300/RF303 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps RF300RF303\\02021 OUTLINE DIMENSIONS Part Numbering System (Notes 3 & 4) RF300 YZ - 5 / S R Relay Series Q = Solder-Coated Leads (Sn60/Pb40) R = RoHS Compliant Solder (Sn99.3/Cu0.7) No Sufix = Gold-plated Leads S = 0.187” Leads No Suffix = 0.75” Leads Nominal Coil Voltage 5 = 5V 12 = 12V Ground Pin Option (See Appendix A) 411/431 411D/431D 411DD/431DD 411T/431T 4 1 412H/432H 412K 412V 412D/432D 412DV/432DV 712D/732D 412DD/432DD 412DDV 412T/432T 712TN/732TN SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) SCHEMATIC (Bottom View) 2 3 DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS) .370 (9.40) DIA. MAX. .335 (8.51) DIA. MAX. H WIRE LEAD: .75 (19.05) MIN. (Viewed from Terminals) .035 (.89) REF .031 (.79) REF 36°± 3° TYP. .200 (5.08) ± .010 (.25) DIA. NOTES: 1. DIMENSIONS ARE IN INCHES, METRIC EQUIVALENTS SHOWN IN ( ). 2. POSTITIONS 5 AND 10 ARE FOR UNINSULATED CASE GROUND OPTIONS. 3. NO PROTRUSION BELOW BOTTOM OF HEADER WHEN GROUND PINS ARE INSTALLED 4. TO ORDER THE CASE GROUND OPTION, AFTER THE SERIES DESIGNATOR, ADD “Y” TO THE PART NUMBER FOR POSITION 5 OR “Z” TO THE PART NUMBER FOR POSITION 10. SCHEMATIC DIAGRAMS RF300 GENERAL NOTES 1. Relays will exhibit no contact chatter in excess of 10 µsec or transfer in excess of 1 µsec. 2. For reference only. Coil resistance not directly measureable at relay terminals due to internal series diode. 3. The slash and characters appearing after the slash are not marked on the relay. 4. Unless otherwise specified, relays will be supplied with either gold-plated leads. RF300: .275 (6.99)

Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2021 TELEDYNE RELAYS Series RF300/RF303 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps RF300RF303\\072021 TYPICAL RF CHARACTERISTICS (See RF Notes) -60 -50 -40 -30 -20 -10 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 -60 -50 -40 -30 -10 -20 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 -0.8 -0.6 -0.4 -0.2 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 1.0 1.2 1.4 1.6 1.8 2.0 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 VSW R -0.1 0.1 0.3 0.5 0.7 0.9 1.1 -100 0 100 200 300 400 500 600 700 800 900 T ime ( ps) Volt 10% 90% 37ps reference 51.1ps pulse rise time 62.3ps propagation delay time Isolation Across Contacts (RF Note 4) Isolation Pole to Pole (RF Note 5) Insertion Loss (RF Note 6) VSWR (RF Note 6) RF300 Time Response (RF Note 6) RF NOTES 1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid ® 6002 with SMA connectors. (RT/duroid ® is a registered trademark of Rogers Corporation.) b. Room ambient temperature. c. Terminals not tested were terminated with 50-ohm load. d. Contact signal level: –10 dBm. e. No. of test samples: 4. 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. 3. Data is per pole, except for pole-to-pole data. 4. Data is the average from readings taken on all open contacts. 5. Data is the average from readings taken on poles with coil energized and de-energized. 6. Data is the average from readings taken on all closed contacts. 7. Test fixture effect de-embedded from frequency and time response data.

© 2021 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 5 Series RF300/RF303 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps RF300RF303\\02021 TYPICAL RF REPEATABILITY PERFORMANCE (See RF Notes 1, 2, and 3) 0 1 234 567 8 9 10 0.12 0.10 .080 ±dB .060 .040 .020 Typical repeatability of attenuation during life (normally open contacts) 0.12 0.10 .080 ±dB .060 .040 .020 0 1 2 3 4 567 8 9 10 Typical repeatability of insertion loss during life (normally closed contacts) MAX X MIN. MAX X MIN. Number of cycles X10 Number of cycles X10 1 Million Cycle Repeatability ±0.1 dB from DC to 3GHz RF NOTES 1. One million cycle repeatability data is based upon 396 observations with an average repeatability ±0.033 dB and a range of ±0.093 dB. 2. Repeatability of attenuation values were obtained from tests conducted in a 20 dB attenuator network with a 0 dBm input signal. 3. Relay operates at frequencies higher than 3 GHz with reduced RF performance characteristics. 4. Curves were developed from tests performed on a 0.031" copper clad, reinforced PTFE circuit board at 20°C (ref). The unutilized contacts were terminated in 50 ohms; characteristic impedance of measuring equipment is 50 ohms. The relays were mounted flush to the circuit board ground plane without the relay header soldered to the ground plane.

Page 6 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2021 TELEDYNE RELAYS Series RF300/RF303 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps RF300RF303\\072021 TYPICAL SIGNAL INTEGRITY CHARACTERISTICS @ 10 Gbps PATTERN GENERATOR SETTINGS

  • 10 Gbps Random Pulse Pattern Generator
  • 231 - 1 PRBS signal
  • PRBS output of 300 mVP-P (nominal)
  • RF PCB effect (negligible) not removed from measurement
  • Data shown is typical of both poles Normally Closed (Typ.) Normally Open (Typ.) Bit Rate Eye Height Eye Width JitterP-P 10 Gbps 254.7 mV 90.38 ps 8.44 ps Bit Rate Eye Height Eye Width JitterP-P 10 Gbps 250.9 mV 88.21 ps 8.00 ps 0 V +130 mV -130 mV 0 ps 40 ps 80 ps 120 ps 160 ps 0 V +130 mV -130 mV 0 ps 40 ps 80 ps 120 ps 160 ps

© 2021 TELEDYNE RELAYS (800) 284-7007 • www.teledynedefenseelectronics.com Page 7 Series RF300/RF303 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 18Gbps RF300RF303\\02021 TYPICAL SIGNAL INTEGRITY CHARACTERISTICS @ 18 Gbps PATTERN GENERATOR SETTINGS

  • 18 Gbps Random Pulse Pattern Generator
  • 231 - 1 PRBS signal
  • PRBS output of 500 mVP-P (nominal)
  • RF PCB effect (negligible) not removed from measurement
  • Data shown is typical of both poles 0 V +150 mV -150 mV 0 ps 20 ps 40 ps 60 ps 80 ps Bit Rate Eye Height Eye Width JitterP-P 18 Gbps 185 mV 46.4 ps 10.44 ps 100 ps

Page 8 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE © 2021 TELEDYNE RELAYS RF300\\062021 APPENDIX A : Ground Pin Positions NOTES 1. Terminal views shown 2. Dimensions are in inches (mm) 3. Tolerances: ± .010 (±.25) unless otherwise specified 4. Ground pin positions are within .015 (0.38) dia. of true position 7. “X” and “Z” Positions are not applicable for JAN Relays .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] 36°±3° Ø.200 [Ø5.08] 45°±3° "Z" POSITION "Y" POSITION "X" POSITION "W" POSITION "U" POSITION (ER116C and ER136C only) "X" POSITION "Z" POSITION "Y" POSITION "Y" POSITION "Z" POSITION "Z" POSITION "Y" POSITION LEGEND: Glass Insulated Lead position Ground Pin position Either Ground Pin or Insulated Lead position depending on Relay type .050 [1.27] Ø.200 [Ø5.08] Indicates ground pin position Indicates glass insulated lead position Indicates ground pin or lead position depending on relay type .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] 36°±3° Ø.200 [Ø5.08] 45°±3° "Z" POSITION "Y" POSITION "X" POSITION "W" POSITION "U" POSITION (ER116C and ER136C only) "X" POSITION "Z" POSITION "Y" POSITION "Y" POSITION "Z" POSITION "Z" POSITION "Y" POSITION LEGEND: Glass Insulated Lead position Ground Pin position Either Ground Pin or Insulated Lead position depending on Relay type .050 [1.27] Ø.200 [Ø5.08] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] .100 [2.54] 36°±3° Ø.200 [Ø5.08] 45°±3° "Z" POSITION "Y" POSITION "X" POSITION "W" POSITION "U" POSITION (ER116C and ER136C only) "X" POSITION "Z" POSITION "Y" POSITION "Y" POSITION "Z" POSITION "Z" POSITION "Y" POSITION LEGEND: Glass Insulated Lead position Ground Pin position Either Ground Pin or Insulated Lead position depending on Relay type .050 [1.27] Ø.200 [Ø5.08] RF312, RF332, RF700, RF703 ”X” POSITION