RE30E COPAL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

5 ~ 12 V 5 ~ 12 V Open collector 24 V 24 V Open collector Input voltage OPTICAL ENCODERS ■ FEATURES

  • With temp. compensation circuit
  • With zero index signal
  • Power supply voltage is for 5 ~ 12 V, 24V
  • Economy type
  • RoHS compliant ■ PART NUMBER DESIGNATION ■ LIST OF PART NUMBERS RE30E - 100 - 2 1 3 - 1 Series name Resolution (P/R) 100, 200, 300, 360, 400, 500, 600, 800, 900, 1000, 1024 Output connection 1：Cable wire Input voltage 3：5 ~ 12 V 4：5 ~ 12 V Open collector 8：24 V A：24 V Open collector Output phase “Z” 1：Provided Output phase 100 (P/R) RE30E-100-213-1 A RE30E-100-214-1 A RE30E-100-218-1 A RE30E-100-21A-1 200 (P/R) RE30E-200-213-1 A RE30E-200-214-1 A RE30E-200-218-1 A RE30E-200-21A-1 300 (P/R) RE30E-300-213-1 A RE30E-300-214-1 A RE30E-300-218-1 A RE30E-300-21A-1 360 (P/R) RE30E-360-213-1 A RE30E-360-214-1 A RE30E-360-218-1 A RE30E-360-21A-1 400 (P/R) RE30E-400-213-1 A RE30E-400-214-1 A RE30E-400-218-1 A RE30E-400-21A-1 500 (P/R) RE30E-500-213-1 A RE30E-500-214-1 A RE30E-500-218-1 A RE30E-500-21A-1 600 (P/R) RE30E-600-213-1 A RE30E-600-214-1 A RE30E-600-218-1 A RE30E-600-21A-1 800 (P/R) RE30E-800-213-1 A RE30E-800-214-1 A RE30E-800-218-1 A RE30E-800-21A-1 900 (P/R) RE30E-900-213-1 A RE30E-900-214-1 A RE30E-900-218-1 A RE30E-900-21A-1 1000 (P/R) RE30E-1000-213-1 A RE30E-1000-214-1 A RE30E-1000-218-1 A RE30E-1000-21A-1 1024 (P/R) RE30E-1024-213-1 A RE30E-1024-214-1 A RE30E-1024-218-1 A RE30E-1024-21A-1 ※ Verify the above part numbers when placing orders. The products indicated by A mark are manufactured upon receipt of order basis. RE30E RoHS compliant

(When mounting) Radial Axial Net weight Operating temp. range Storage temp. range Protection grade Input voltage Input current Output wave form Output phases (P/R) Resolution Phase difference of outputs A & B Maximum frequencys response Output signal “1 (High)” “0 (Low)” Output impedance ■STANDARD SPECIFICATIONS DC5 ~ 12 V ± 10 % DC24 V ± 10 % 50 mA maximum Square wave A, B, Z 100, 200, 300, 360, 400, 500 600, 800, 900, 1000, 1024 90° ± 45° 10 kHz (100 P/R), 20 kHz (200P/R) 25 kHz (300 ~ 500 P/R), 60 kHz (600 P/R) 80 kHz (800 P/R), 90 kHz (900P/R) 100 kHz (1000 ~ 1024 P/R) (Vcc − 1) V min. (Vcc − 2) V min. + 0.5 V max. + 1.0 V max. 2.2 kΩ LED

  • Electrical characteristics ● Mechanical characteristics 0.29 mN·m {3 gf·cm} maximum 2 g·cm maximum

19.6 N {2 kgf} maximum

9.81 N {1 kgf} maximum

Approx. 70 g

  • Environmental characteristics 0 ~ 70 °C – 20 ~ 80 °C IP40 Test item ■RELIABILITY TEST The output wave form shall satisfy the STANDARD SPECIFICATIONS after the following tests. Test conditions Amplitude : 1.52 mm or 98.1 m/s (10 G) whichever is smaller. 10 ~ 500 Hz excursion 0.25 h/cycle, 8 cycles each for X, Y, Z, directions. 3 times each in 6 directions (X, Y, Z) at 490 m/s (50 G), 11 ms. 80 °C 96 h (To be measured after leaving samples for 1 h at normal temperature and humidity after the test.) 70 °C 96 h − 20 °C 96 h 0 °C 96 h 40 °C Relative humidity 90 〜 95 % 96 h (To be measured after wiping out moisture and leaving samples for 1 h at normal temperature and humidity after the test.) To be done 10 cycles with the following condition (To be measured after leaving samples for 1 h at normal temperature and humidity after the test.) 80 °C 1 h、− 20 °C 1 h

RE30D出力 Output “A” Output “B” Output “Z” a b c d R CW CCW a, b, c, d = 1/4T1/8T R= T3/4T The “Z” phase, however, includes no more than two “B” phase startups (CW rotation) T RE30D出力回路 Vcc 2.2 kΩ Output 0 V 5～12 V type Vcc Output 0 V 5～12 V open collector type Sink current of output circuit 80 mA maximum (at 25 C) φ240.1 2 – M 3, D = 4 min. 100.5 4 30 Cable length = 500 min. Shield cableAWG28 3.5 –0.013 –0.003 φ 15 0 –0.05 φ φ RE30E OPTICAL ENCODERS ■ OUTPUT ■ OUTPUT CIRCUIT

  • RE30E Red Black White Green Yellow Cable shield ■ OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0.4 (Unit: mm) ■ ELECTRICAL WIRING Power B Power 0 (V) Output “A” Output “B” Output “Z” NC