PRCP-RHT650

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

Compliant with AEC-Q200 Rev-C-Stress Test Qualification for Passive Components in Automotive Applications Operating temperature range up to 125 °C Low thermal derating factor Higher hold currents at elevated temperature Choice of operating cuttents RoHS compliant* and halogen free** PRCP-RHT Series - Polymer Resettable Circuit Protectors *RoHS Directive 2002/95/EC Jan 27 2003 including annex and RoHS Recast 2011/65/EU June 8,2011. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.

Electrical Characteristics

Model V max. Volts I max. Amps Ihold I trip Resistance Max. Time To Trip Tripped Power Dissipation Amperes at 23 °C Ohms at 23 °C Amperes at 23 °C Seconds at 23 °C Watts at 23 °C Hold Trip RMin. R1Max. (Post Trip) Max. Typ. Environmental Characteristics Operating Temperature -40 °C to +125 °C +125 °C to -40 °C, 10 cycles Test Procedutes And Requirements For Model PRCP-RHT Series Accept/Reject CriteriaTest ConditionsTest Thermal Derating Chart - I hold (Amps) Model Ambient Operating Tempetature -40 °C -20 °C 0 °C 23 °C 40 °C 50 °C 60 °C 70 °C 85 °C 125 °C *RoHS COMPLIANT& AEC APPROVED 3)4 How to Order PRCP - RHT 750 - __ Product Designator Series RHT = High Temperature Radial Leaded Component Hold Current,Ihold 070 - 1300 (0.70 - 13.00 Amps) Packaging Options - = Bulk Packaging - 2 = Tape and Reel* *Packaged per EIA 486-B ±15 % typical resistance change ±10 % typical resistance change Resettable fault protection of general electronic equipment **COPAL follows the prevailing definition of “halogen free” in the industry. COPAL considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (CI) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (CI) content is 1500 ppm or less. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

PRCP-RHT Series - Polymer Resettable Circuit Protectors Product Dimensions DIMENSIONS: MM (INCHES) Model A B C D E F Physical Characteristics PRCP-RHT070 6.86 (0.27) 10.8 (0.425) 5.1 (0.201) 0.7 (0.028) 7.6 (0.30) 3.0 (0.12) 0.51 (0.020) 1 Sn/CuFe PRCP-RHT200 9.4 (0.37) 14.0 (0.55) 5.1 (0.201) 0.7 (0.028) 7.6 (0.30) 3.0 (0.12) 0.51 (0.020) 3 Sn/Cu PRCP-RHT450 10.4 (0.41) 15.6 (0.61) 5.1 (0.201) 0.7 (0.028) 7.6 (0.30) 3.0 (0.12) 0.81 (0.032) 2 Sn/Cu PRCP-RHT650 12.7 (0.50) 22.2 (0.88) 5.1 (0.201) 0.7 (0.028) 7.6 (0.30) 3.0 (0.12) 0.81 (0.032) 2 Sn/Cu PRCP-RHT750 14.0 (0.55) 23.5 (0.93) 5.1 (0.201) 0.7 (0.028) 7.6 (0.30) 3.0 (0.12) 0.81 (0.032) 2 Sn/Cu PRCP-RHT1300 23.5 (0.925) 28.7 (1.17) 10.2 (0.402) 0.7 (0.028) 7.6 (0.30) 3.6 (0.14) 1.0 (0.040) 2 Sn/Cu Packaging: BULK: 500 pcs. per bag TAPE & REEL: PRCP-RHT070 ~ PRCP-RHT200 = 3000 pcs. per reel; PRCP-RHT450 ~ PRCP-RHT650 = 1500 pcs. per reel; PRCP-RHT750 ~ PRCP-RHT1300 = 1000 pcs. per reel Typical Time to Trip at 23 °C Typical Part Marking Represents total content. Layout may vary. 0.51 (24AWG) 0.81 (20AWG) 1.0 (18AWG)

Applications

Protection of automotive circuitry including engine control modules Overcurrent surge protection of electronic equipment required to operate at high operating temperature rangest Resettable fault protection of general electronic equipment A E B D C E Style 2 B D A C F Style 1 F F A E B D C Style 3 RH750 4180S MANUFACTURER'S MARKPART IDENTIFICATION COUNTRY OF MANUFACTURE (S = CHINA) DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; NEXT THREE DIGITS = DAY OF YEAR) EXAMPLE: 4180 = 2004 DAY 180 0.01 0.1 100 001011 Fault Current (Amps) Time to Trip (Seconds) PRCP-RHT070 PRCP-RHT200 PRCP-RHT450 PRCP-RHT1300PRCP-RHT650 PRCP-RHT750 The Time to Trip curves represent typical performance of a device in a simulated application environment. customer applications may differ from these values due to the influence of other variables. Actual performance in specific Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

ToleranceDimensionsMarkMarkDimension Description Carrier tape width W W 18 -0.5/+1.0 Hold down tape width W0 W4 11 min.(.433) No protrusionHold down tape Top distance between tape edges W2 W6 3 max.(.118) Sprocket hole position W1 W5 (.354) Sprocket hole diameter D0 D0 4 ±0.2 (.157) (±.0078) Abscissa to plane (straight lead) H H 18.5 ±3.0 (.728) (±.118) Abscissa to plane (kinked lead) H0 H0 16 ±0.5 (.63) Abscissa to top: PRCP-RHT070 ~ PRCP-RHT450 H1 H1 32.2 max.(1.268) Abscissa to top: PRCP-RHT650 ~ PRCP-RHT1300 H1 H1 45.0 max.(1.837) Overall width w/lead protrusion: PRCP-RHT070 ~ PRCP-RHT450 C1 42.5 max.(1.673) Overall width w/lead protrusion: PRCP-RHT650 ~ PRCP-RHT1300 C1 55.0 max.(2.165) Overall width w/o lead protrusion: PRCP-RHT070 ~ PRCP-RHT450 C2 42.5 max.(1.673) Overall width w/o lead protrusion: PRCP-RHT650 ~ PRCP-RHT1300 C2 54.0 max.(2.126) Lead protrusion I 1 L 1 1.0 max.(.039) Protrusion of cutout L L 11 max.(.433) Protrusion beyond hold-down tape r I 2 I 2 Not specified Sprocket hole pitch P0 P0 12.7 ±0.3 (0.5) (±.012) 20 consecutivePitch tolerance ±1 (±.039) Device pitch: PRCP-RHT070 ~ PRCP-RHT450 12.7 ±0.3 (0.5) (±.012) Device pitch: PRCP-RHT650 ~ PRCP-RHT1300 25.4 ±0.6 (1.0) (±.024) Tape thickness t t 0.9 max.(.035) Tape thickness with splice: PRCP-RHT070 t 1 1.5 max.(.059) Tape thickness with splice: PRCP-RHT450 ~ PRCP-RHT1300 t 1 2.3 max.(.091) Splice sprocket hole alignment ±0.24.0 (.157) Body lateral deviation h h 0 ±1 (±.039) Body tape plane deviation p p 0 ±0.3 (±.012) Ordinate to adjacent component lead P1 P1 3.81 ±0.07 (.015) (±.028) PRCP-RHT Series Tape and Reel Specifications Devices taped using EIA468–B/IEC60286-2 standards. See table below and Figures 1 and 2 for details. DIMENSIONS: MM (INCHES) (±.008) (±.02) (-0.02/+0.03) -0.5/+0.75 Dimensions Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

t User direction of feed Cross section A - B p p H Reference plane W A B F D0P0I1 L hh IEC EIA ToleranceDimensionsMarkMarkDimension Description Lead spacing: PRCP-RHT070 ~ PRCP-RHT750 F F 5.08 -0.2/+0.8 Lead spacing: PRCP-RHT1300 F F 10.2 -0.2/+0.8 Reel width: PRCP-RHT070 ~ PRCP-RHT450 w W2 56 max.(2.20) Reel width: PRCP-RHT650 ~ PRCP-RHT1300 w W2 63.5 max.(2.50) Reel diameter d a 370.0 max.(14.57) Space between flanges less device ±3.254.75W1 h (.187) (±.128) Arbor hole diameter f c 26.0 ±12.0 (±.472)(1.02) Core diameter h n 80.0 max.(3.15) Box 62 (13.6)(14.0)(2.44) max.3Consecutive missing places Not specifiedEmpty places per reel Taped Component Dimensions - Figure 1 Reel Dimensions - Figure 2 DIMENSIONS: MM (INCHES) h w h f d Reel Upper side Tape Lower side User direction of feed PRCP-RHT Series Tape and Reel Specifications 355 345 Dimensions Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Date Rev. Reason

Revision History

12/13/2005 A Initial issue PRCP-RHT SERIES Revision : D Issue date : 06/04/15 08/31/2012 B Updated Product Dimensions 10/02/2013 C Updated Tape and Reel Specifications 06/04/2015 D Updated Features (Added halogen free)