PRCP-SMDF

PRCP-SMDF COPAL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

RoHS compliant* and halogen free** 2018 footprint Agency recognition:

Applications

Power Over Ethernet (IEEE 802.3 af) port protection Automotive electronic control module protection Telecom equipment low voltage protection Thermal Derating Chart - Ihold / Itrip (Amps) Ambient Operating Temperature Model -40 C -20 C 0 C 23 C 40 C 50 C 60 C 70 C 85 C TNAILPMOCSHoR* 50A9 at 23 °C at 23 °C at 23 °C at 23 °C ±5 % typical resistance change ±5 % typical resistance change ±10 % typical resistance change No change *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. **COPAL follows the prevailing definition of “halogen free” in the industry.COPAL considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Cholrine(Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Per PRCP physical description R min ≤ R ≤ R1 max T ≤ max.time to trip (seconds) No trip No arcing or burning No arcing or burning 95% min. coverage 125 °C +85 °C, 1000 hours +85 °C, 85 % R.H. 1000 hours +85 °C to -40 °C, 20 times MIL-STD-202, Method 215 MIL-STD-883C, Method 2007.1, Test Conditions Verify dimensions and materials In still air @ 23 °C At specified current,V max,23 °C 30 min. at I hold V max,I max,100 cycles V max,48 hours ANSI/J-STD-002

Packaging: 6000 pcs. per reel. PRCP-SMDF Series - Polymer Resettable Circuit Protectors MM (INCHES) UNIT = Terminal material: Electroless Ni under immersion Au Termination pad solderability: Standard Au finish: Meets ANSI/J-STD-002 Category 2. Recommended Storage: 40 °C max./70 % RHmax. A B C Top and Bottom View Side View D Recommended Pad Layout 4.6 ± 0.1 (.181 ± .004) 3.4 ± 0.1 (.134 ± .004) 1.5 ± 0.05 (.059 ± .002) 1.5 ± 0.05 (.059± .002) Typical Time to Trip at 23 The Time to Trip curves represent typical performance of a device in a simulated application envi ronment. Actual perfo r- c customer applications may differ from these values due uence of other variables. 0.01 0.1 0.001 0.1 001011 100 Fault Current (Amps) Time to Trip (Seconds) PRCP-SMDF050 Model DBA PRCP-SMDF050 4.72 (0.186) 5.44 (0.214) 4.22 (0.166) 4.93 (0.194) 0.79 (0.031) 1.09 (0.043) 0.30 (0.012) Customers should verify actual device performance in their specific applications. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

SMDF = 2018 Surface Mount Component Hold Current, Ihold 050 (0.50 Amps) Packaging Packaged per EIA 481-1 -2 = Tape and Reel PRCP-SMDF Series - Polymer Resettable Circuit Protectors Typical Part Marking Represents total content. Layout may vary. PART IDENTIFICATION: 50 = PRCP-SMDF050 Solder Reflow Recommendations Notes:

• PRCP-SMDF models cannot be wave soldered. Please contact COPAL ELECTRONICS for hand soldering recommendations.
• If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements.
• Compatible with Pb and Pb-free solder reflow profiles. 05 A9 DATE CODE: A = BIWEEKLY DATE CODE (A = WEEK 1 & WEEK 2) 9 = YEAR (2009) Halogen Free Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. The device characteristics and parameters in thi data sheet can and do vary in different applications and actual device performance may vary over time. r r 5FNQFSBUVSF ˃$ 1SFIFBUJOH 4PMEFSJOH $PPMJOH 5JNF TFDPOET

Tape Dimensions per EIA 481-2 W B1 max. F E2 min. T max. T1 max. Leader min. Trailer min. Reel Dimensions A max. N min. W2 max. PRCP-SMDF Series Tape and Reel Specifications N(HUB DIA.) (MEASURED AT HUB) A T COVER TAPE T1 A0 (MEASURED AT HUB) W1P1 F D0 P2 W UNIT = MM (INCHES) 16.0 ± 0.3 (0.630 ± 0.012) 4.0 ± 0.1 (0.157 ± 0.004) 8.0 ± 0.1 (0.315 ± 0.004) 2.0 ± 0.1 (0.079 ± 0.004) 5.1 ± 0.15 (0.201 ± 0.006) 5.6 ± 0.23 (0.220 ± 0.009) 7.5 ± 0.10 (0.295 ± 0.004) 1.75 ± 0.10 (0.069 ± 0.004) 1.0 ± 0.15 (0.039 ± 0.015) 1.5 + 0.1/-0.0 (0.059 + 0.004/-0) 16.4 + 2.0/ -0.0 12.1 (0.476) 14.25 (0.561) 0.6 (0.024) 0.1 (0.004) 390 (15.35) 160 (6.30) 331 (13.03) (1.97) 22.4 (0.882) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Customers should verify actual device performance in their specific applications.

Date Rev. Reason

Revision History

11/02/2005 A Initial issue Revision : H Issue date : 08/19/15 11/04/2005 B Updated Typical Part Marking 12/12/2005 C Updated UL, CSA, TÜV File Number 01/14/2009 D Updated How to Order 04/21/2009 E Updated Typical Part Marking 08/05/2009 F Updated Electrical Characteristics, Thermal Derating Chart and Typical Time to Trip at 23 °C 07/26/2011 G Updated packaging Quantity of reel was changed from 3000 pcs. per reel to 6000 pcs. per reel. 08/19/2015 H Updated notice.