QW0905-LG-110HRF LIGITEK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
DOC. NO : QW0905-LG-110HRF/DBK-A-CT REV. : B DATE : 08 - Jun. - 2015 DATA SHEET LG-110HRF/DBK-A-CT LED SMD LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Lead-Free Parts Pb 發行 DCC 立碁電子
PART NO. LG-110HRF/DBK-A-CT Features: 1. Package in 8.0mm carrier t ape on 7" diameter reel. 2. Compatible with automatic placement equipment. 3. Compatible with reflow solder process. Descriptions: 1. The LG-110 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtai ned. 2. Besides, lightweight makes them ideal for miniature applications. etc. Applications: 1. Automotive : backlighting in dashboard and switch. 2. Telecommunication : indicator and backlighting in tel ephone and fax. 3. Flat backlight for LCD, switch and symbol 4. General use. Device Selection Guide: LG-110HRF/DBK-A-CT COLOR Emitted AlGaInP Blue MATERIALPART NO Lens Water Clear LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/12 InGaN Red
Note : 1.All dimension are in millimeter tolerance is ±0.1mm unless otherwise noted. 2.Specifications are subject to change without notice. Note : The tolerances unless mentioned is ±0.1mm,Angle ±0.5. Unit=mm. Recommended Soldering Pad Dimensions LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Package Dimensions Page 2/12 3.2 0.6 0.6 PCB 0.9 1.0 1.5 1.5 5.0 1.0 1.0 3,4 Soldering Terminal + 3,4 0.2 _ 2 HRF DBK Resin 0.8 2 Cathode Mark 0.6 1.5 0.5 DIE2 DIE1 1.0 0.6 PART NO. LG-110HRF/DBK-A-CT
Typical Electrical & Optical Characteristics (Ta=25 ℃) Peak Forward Current Duty 1/10@10KHz Tstg Storage Temperature ℃ IFP IF Topr ESD Reverse Current @5V Operating Temperature Electrostatic Discharge Forward Current Ir μA V mA mA Symbol PD Absolute Maximum Ratings at Ta=25 ℃ Parameter Power Dissipation UNIT DBK mW Ratings LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/12 HRF PART NO. LG-110HRF/DBK-A-CT Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensit y data did not includin g ±15% testin g tolerance. Viewing Angle 2θ 1/2 Dominant Wavelength Spectral Line Half-Width Forward Voltage VF λD deg IF=20mA nm V nm IF=20mA IF=20mA IF=20mA Items Luminous Intensity Iv Symbol mcd Max.Typ.Min. UNIT IF=20mA CONDITION 60 72 90 100 25 20 10 50 2000 500 -40 ~ + 85 -40 ~ + 100 HRF 50 80 ---- DBK 80 125 ---- HRF ---- 630 ---- DBK ---- 470 ---- HRF ---- 20 ---- DBK ---- 30 ---- HRF 1.5 ---- 2.4 DBK 2.8 ---- 3.6 HRF ---- 120 ---- DBK ---- 120 ----
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/12 Luminous Intensity Classification PART NO. LG-110HRF/DBK-A-CT Iv(mcd) at 20mA BIN CODE Min. Max. Dominant Wavelength Classification λD(nm) at 20mA BIN CODE Min. Max. Iv(mcd) at 20mA BIN CODE Min. Max. λD(nm) at 20mA BIN CODE Min. Max. DBK 0D 465 468 0C 468 471 0B 471 474 0A 474 477 HRF 29 624 627 30 627 630 31 630 633 32 633 636 HRF P5 0 8 0 Q 80 125 R 125 200 S 200 320 DBK Q 80 125 R 125 200 S 200 320 T 320 500
Typical Electro-Optical Characteristics Curve LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page5/12 Fig.6 Directive Radiation PART NO. LG-110HRF/DBK-A-CT 1.0 Relative Intensity@20mA Normalize@25℃ Ambient Temperature( ℃) Fig.5 Relative Intensity vs. Wavelength 0.5 -20-40 20 40 100 60 80 Fig.2 Relative Intensity vs. Forward Current 100 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 Forward Current(mA) Forward Voltage(V) 1.0 1.0 0.1 100 1.5 2.0 3.0 2.0 1.5 2.5 2.5 2.0 1.5 1.0 0.5 Relative Intensity Normalize @20mA 2.5 3.0 10 1.0 Fig.1 Forward current vs. Forward Voltage HRF CHIP 1000 3.5 1000 650 700550 600 Wavelength (nm) 1.0 0.5 Relative Intensity@20mA0 02 0 4 0 6 0 80 100 Forward Current(mA) Ambient Temperature (Ta°C) Fig.3 Forward Current vs. Temperature
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Typical Electro-Optical Characteristics Curve 6/12Page Fig.6 Directive Radiation PART NO. LG-110HRF/DBK-A-CT 0.5 Relative Intensity@20mA Normalize @25℃ Ambient Temperature( ℃) 0-40 -20 0.0 60 1008040 Fig.4 Relative Intensity vs. Temperature 2.5 1.5 1.0 2.0 3.0 Relative Intensity Normalize @20mA Forward Current(mA) Forward Current(mA)Forward Voltage(V) 11 0 0.0 0.5 1.0 1.5 2.0 100 1000 Fig.2 Relative Intensity vs. Forward CurrentFig.1 Forward current vs. Forward Voltage 2.5 3.0 DBK CHIP 2.0 100 1.0 0.1 1.0 1000 3.0 4.0 5.0 Fig.5 Relative Intensity vs. Wavelength Relative Intensity@20mA Wavelength (nm) 400 450 500 0.0 0.5 1.0 550 02 0 4 0 6 0 80 100 Forward Current(mA) Ambient Temperature (Ta°C) Fig.3 Forward Current vs. Temperature
Part No. 3000 devices8.0mm tape,7"reel Label
Description
0.25 Carrier Tape Dimensions 3.4 1.25 Packing Specifications‧ Note : The tolerances unless mentioned is ±0.1mm,Angle ± 0.5. Unit=mm. Polarity 4.0±0.2 2.0 1.5 1.874.0±0.2 3.5±0.2 1.75 5.3 8.0±0.3 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/12 PART NO. LG-110HRF/DBK-A-CT
6.0±1.0 9.0±1.0 12.0±1.0ψ13.5±1.0 178±1.5 2.0±0.5 0.6 0.8 0.4 0.2 0.2 0.4 0.6 0.8 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/12 PART NO. LG-110HRF/DBK-A-CT LIGITEK ELECTRONICS CO., LTD. VF:2.8-3.6 BIN/HUE : QTY(PCS): LOT : PART : Pb LG-110HRF/DBK-A-CT BIN : Luminous Intensity HUE : Dominant Wavelength VF : Forward Voltage VF:1.5-2.4 Q/29-R/0B GS11560168 3000
- 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm W H L LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Box Explanation Page 9/12 PART NO. LG-110HRF/DBK-A-CT 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 58cm X 34cm x 35cm L W H
Recommended Soldering Conditions LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 10/12 PART NO. LG-110HRF/DBK-A-CT 1. Hand Solder Basic spec is 280 3 sec one time only. ≦℃ 3.After soldering,do not warp the circuit board. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 120 sec.Max. Preheat 180~200°C
2 PB-Free Reflow Solder
1~5°C/sec 260°C MaX. 10sec.Max Above 220°C 60 sec.Max. 1~5°C/sec 6°C/sec
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. LED LED Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ± ℃ 5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forward current should not be allowed to change by more than 40% of its desired value. Circuit model A Circuit model B PART NO. LG-110HRF/DBK-A-CT
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reliability Test: Page 12/12 PART NO. LG-110HRF/DBK-A-CT MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 Solderability Test 1.T.Sol=235 ℃±5℃ 2.Immersion time 2 ±0.5sec 3.Coverage ≧95% of the dipped surface Environmental Test 1.T=260°C Max. 10sec.Max. 2. 6 Min 30mins 5mins 30mins
2.10 Cyeles
MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 MIL-STD-750D:2031.2 J-STD-020 Classification Test Item Test Condition Endurance Test Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=65 ℃±5℃ 2.RH=90%~95% 3.t=1000hrs¡Ó2hrs (10min) (10min) 2.total 10 cycles Thermal Shock Test High Temperature High Humidity Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, + 72hrs) 1.Ta=Under Room Temperature As Per Data S heet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, + 72hrs) High Temperature Storage Test Operating Life Test Reference Standard JIS C 7021: B-12 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F:103B JIS C 7021: B-11 MIL-STD-883D:1008 JIS C 7021: B-10 MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1