PTH12020L ARTESYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Business-Critical Continuity PTH12020

12 Vin

  • 18 A output current
  • 12 V input voltage
  • Wide-output voltage adjust
  • 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’
  • Auto-track™ sequencing*
  • Margin up/down controls
  • Efficiencies up to 95%
  • Output ON/OFF inhibit
  • Output voltage sense
  • Point-of-Load-Alliance (POLA) compatible
  • Available RoHS compliant
  • 2 Year Warranty Total Power: 99 Watts # of Outputs: Single Safety
  • UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1
  • TÜV Product Service (EN60950)
  • CB Report and Certificate to IEC60950 Rev. 08.11.11_166 PTH12020 Se ries 1 of 6 Input Input voltage range: (See Note 3, page 3) 10.8 - 13.2 Vdc Input current: No load 10 mA typ. Remote ON/OFF: (See Note 1, page 3) Positive logic Start-up time: 1 V/ms Undervoltage lockout: 9.2 - 9.7 V typ. Track input voltage: Pin 8 (See Note 6, page 3) ± 0.3 Vin Output Voltage adjustability: (See Note 4, page 3) Suffix ‘-W’ Suffix ‘-L’ 1.2 - 5.5 Vdc 0.8 - 1.8 Vdc Setpoint accuracy: ± 2.0% Vo Line regulation: ± 5 mV typ. Load regulation: ± 5 mV typ. Total regulation: ± 3.0% Vo Minimum load: 0 A Ripple and noise:

20 MHz bandwidth

Suffix ‘-W’ Suffix ‘-L’ 32 mV pk-pk 1% Vo Temperature co-efficient: -40 °C to +85 °C ± 0.5% Vo Transient response: (See Note 5, page 3) 70 µs recovery time Overshoot/undershoot 130 mV Margin adjustment: ± 5.0% Vo Specifications All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 560 µF, Cout = 0 µF *Auto-track™ is a trade mark of Texas Instruments

Rev. 08.11.11_166 PTH12020 Se ries 2 of 6 Embedded Power for Business-Critical Continuity 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 Environmental Specifications Thermal performance: (See Note 2, page 3) Operating ambient, temperature Non-operating -40° C to +85 °C -40° C to +125 °C MSL (‘Z’ suffix only): JEDEC J-STD-020C Level 3 EMC Characteristics Electrostatic discharge: EN61000-4-2, IEC801-2 Conducted immunity: EN61000-4-6 Radiated immunity: EN61000-4-3 General Specifications Efficiency: See efficiency table on page 3 Insulation voltage: Non-Isolated Switching frequency: Suffix ‘-W’ Suffix ‘-L’ 260 kHz to 380 kHz 200 kHz to 300 kHz Approvals and standards: EN60950, UL/cUL60950 Material flammability: UL94V-0 Dimensions: (L x W x H) 37.97 x 22.10 x 9.00 mm 1.495 x 0.870 x 0.354 in Weight: 7g (0.25 oz) MTBF: Telcordia SR-332 5,236,000 hours Protection Short circuit: Auto reset 30 A typ. Thermal: Auto recovery Specifications Continued

Rev. 08.11.11_166 PTH12020 Se ries 3 of 6 Embedded Power for Business-Critical Continuity 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 PTH12020WAST Part Number System with Options Product Family Point of Load Alliance Compatible The ultra-wide output voltage trim range offers major advantages to users who select the PTH12020. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 1.2 Vdc to 5.5 Vdc. When the PTH12020 converter leaves the factory the output has been adjusted to the default voltage of 1.2 V. Output Voltage Adjustment of the PTH12020 Series Output Current 02 = 18 A Packaging Options No Suffix = Trays T = Tape and Reel (7) Input Voltage 12 = 12 V Mechanical Package Always 0 Output Voltage Code W = Wide, L = Low Voltage Pin Option A = Through-Hole Std. Pin Length (0.140”) A = Surface-Mount Tin/Lead Solder Ball Mounting Option (8) D = Horizontal Through-Hole (RoHS 6/6) H = Horizontal Through-Hole (RoHS 5/6) S = Surface-Mount Solder Ball (RoHS 5/6) Z = Surface-Mount Solder Ball (RoHS 6/6)

Ordering Information

(max) Input Voltage Output Voltage Output Currents Efficiency (max) Regulation Model Numbers (8, 9) Min Max Line Load 99 W 10.8 - 13.2 Vdc 0.8 - 1.8 Vdc 0 A 18 A 89% ± 5 mV ± 5 mV PTH12020L 99 W 10.8 - 13.2 Vdc 1.2 - 5.5 Vdc 0 A 18 A 95% ± 5 mV ± 5 mV PTH12020W Efficiency Table - PTH12020W (IO = 18 A) Output Voltage Efficiency Vo = 5.0 V 95% Vo = 3.3 V 93% Vo = 2.5 V 92% Vo = 1.8 V 90% Vo = 1.5 V 88% Vo = 1.2 V 86% Efficiency Table - PTH12020L (IO = 18 A) Output Voltage Efficiency Vo = 1.8 V 89% Vo = 1.5 V 87% Vo = 1.2 V 85% Vo = 1.0 V 83% Vo = 0.8 V 80% Notes 1 Remote ON/OFF. Positive Logic ON: Pin 3 open; or V > Vin - 0.5 V OFF: Pin 3 GND; or V < 0.8 V (min - 0.2 V). 2 See Figures 1, 2 and 3 for safe operating curves. 3 A 560 µF electrolytic input capacitor is required for proper operation. The capacitor must be rated for a minimum of 800 mA rms of ripple current. 4 An external output capacitor is not required for basic operation. Adding 330 µF of distributed capacitance at the load will improve the transient response. 5 1 A/µs load step, 50 to 100% Iomax, Cout = 330 µF. 6 If utilized Vout wil l track applied voltage by ±0.3 V (up to Vo set point). 7 Tape and reel packaging only available on the surface-mount versions.

8 To order Pb-free (RoHS compatible) surface-mount parts replace the

mounting option ‘S’ with ‘Z’, e.g. PTH12020WAZ. To order Pb-free (RoHS compatible) through-hole parts replace the mounting option ‘H’ with ‘D’, e.g. PTH12020WAD. 9 NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at http://www.Emerson.com/EmbeddedPower to find a suitable alternative.

Rev. 08.11.11_166 PTH12020 Se ries 4 of 6 Embedded Power for Business-Critical Continuity 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 PTH12020W Characteristic Data Figure 2 - Safe Operating Area Vin = 12 V, Output Voltage = 3.3 V (See Note A) Figure 1 - Safe Operating Area Vin = 12 V, Output Voltage = 5 V (See Note A) Figure 4 - Efficiency vs Load Current Vin = 12 V (See Note B) Figure 3 - Safe Operating Area Vin = 12 V, Output Voltage ≤ 1.8 V (See Note A) Figure 5 - Standard Application Notes A SOA curves represent the conditions at which internal components are within the Emerson Network Power derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. TEMPERATURE (ºC) Nat Conv

100 LFM

200 LFM

400 LFM

OUTPUT CURRENT (A) 0246 81 01 21 41 6 18 TEMPERATURE (ºC) Nat Conv OUTPUT CURRENT (A) 0246 81 01 21 41 61 8 EFFICIENCY (%) OUTPUT CURRENT (A) 5.0V 3.3V 2.5V 1.8V 1.5V 1.2V 100 02 46 81 01 21 41 6 Vout 1820 TEMPERATURE (ºC) Nat Conv OUTPUT CURRENT (A) 0246 81 01 21 41 6 18 Track 8 9 10 PTH12020 (Top View) Margin Up Margin Down 5 4 3 GND GND L O A D C in 560F (Required) V in Inhibit C out 330F (Optional) +R SET 1%, 0.1W (Required) V out V o Sense

Rev.mm.dd.yy short title of product 5 of x Embedded Power for Business-Critical Continuity 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 Rev. 08.11.11_166 PTH12020 Se ries 5 of 6 Embedded Power for Business-Critical Continuity 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 PTH12020L Characteristic Data Figure 7 - Efficiency vs Load Current for PTH12020L Vin = 12 V (See Note B) Figure 6 - Safe Operating Area for PTH12020L Vin = 12 V, Output Voltage = 1.8 V (See Note A) Figure 8 - Standard Application Notes A SOA curves represent the conditions at which internal components are within the Emerson Network Power derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. TEMPERATURE (ºC) Nat Conv OUTPUT CURRENT (A) 0369 12 15 18 EFFICIENCY (%) OUTPUT CURRENT (A) 1.8V 1.5V 1.2V 1.0V 0.8V 100 0 3691 21 5 Vout Track 8 9 10 PTH12020 (Top View) Margin Up Margin Down 5 4 3 GND GND L O A D C in 560F (Required) V in Inhibit C out 330F (Optional) +R SET 1%, 0.1W (Required) V out V o Sense

Figure 9 - Plated Through-Hole Figure 10 - Surface-Mount Pin Connections Pin No. Function Pin 1 Ground Pin 2 Vin Pin 3 Inhibit* Pin 4 Vo adjust Pin 5 Vo sense Mechanical Drawings Pin Connections cont. Pin No. Function Pin 6 Vout Pin 7 Ground Pin 8 Track Pin 9 Margin down* Pin 10 Margin up* * Denotes negative logic: Open = Normal operation Ground = Function active Americas

5810 Van Allen Way

Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza

2 Wing Yip Street

Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.Emerson.com/EmbeddedPower techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co. EmersonNetworkPower.com Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power 313 process yellow 3405 1797 1375 116 2607 652 242 2985 375 240 Embedded Power for Business-Critical Continuity Rev. 08.11.11_166 PTH12020 Se ries 6 of 6 TOP VIEW Side View 1.495 (37.97) 0.870 3 54 10 9 81 0.354 (9.00)max. Host Board Lowest Component 0.010 min. (0.25) Bottom side Clearance (22.10) ø0.040 (1.02)

10 Places

0.500 (12.70) 0.125 (3.18) 0.625 (15.88) 0.125 (3.18) (1.52) 0.060 (19.05) 0.750 (1.52) 0.060 (3.55) 0.140 Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places 0.030 (0.76) 3 Places 0.010 (0.25) (0.070 (1.78) (Standoff Shoulder) TOP VIEW SIDE VIEW 1.495 (37.97) 0.870 3 54 10 9 81 (22.10) 0.500 (12.70) 0.125 (3.18) 0.625 (15.88) 0.125 (3.18) (1.52) 0.060 (19.05) 0.750 (1.52) 0.060 0.354 (9.00) max.* Solder Ball ø0.040 (1.02) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places 0.030 (0.76) 3 Places 0.010 (0.25) *After solder reflow on customer board