PTH12010 ARTESYN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
DC-DC CONVERTERS POLA Non-isolated 1 NEW Product File Name: pth12010.pdf Rev (07): 19 Dec 2005
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated Cin = 560 µF, Cout = 0 µF SPECIFICATIONS *Auto-track™ is a trade mark of Texas Instruments The PTH12010 is a next generation series of non-isolated dc-dc converters offering some of the most advanced POL features available in the industry. The primary new feature provides for sequencing between multiple modules, a function, which is becoming a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring controlled power-up and power-down. Other industry leading features include margin up/down controls and efficiencies up to 94%. The PTH12010 has an input voltage of 10.8 Vdc to 13.2 Vdc and offers a wide 1.2 Vdc to 5.5 Vdcoutput voltage range with up to
12 A output current, which allows for maximum design flexibility and a pathway for future
upgrades.
- 12 A output current
- 12 V input voltage
- Wide-output voltage adjust
- 1.2 Vdc to 5.5 Vdc for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’
- Auto-track™ sequencing*
- Margin up/down controls
- Efficiencies up to 94%
- Output ON/OFF inhibit
- Output voltage sense
- Point-of-Load-Alliance (POLA) compatible
- Available RoHS compliant PTH12010
12 Vin single output
International Safety Standard Approvals UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1, File No. E174104 TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044 CB Report and Certificate to IEC60950, Certificate No. US/8292/UL OUTPUT SPECIFICATIONS Voltage adjustability Suffix ‘-W’ 1.2-5.5 Vdc (See Note 4) Suffix ‘-L’ 0.8-1.8 Vdc Setpoint accuracy ±2.0% Vo Line regulation ±10 mV typ. Load regulation ±12 mV typ. Total regulation ±3.0% Vo Minimum load 0 A Ripple and noise Suffix ‘-W’ 25 mV pk-pk
20 MHz bandwidth Suffix ‘-L’ 25 mV pk-pk
Temperature co-efficient -40 ºC to +85 ºC ±0.5% Vo Transient response 70 µs recovery time (See Note 5) Overshoot/undershoot 100 mV Margin adjustment ±5.0% Vo INPUT SPECIFICATIONS Input voltage range (See Note 3) 10.8-13.2 Vdc Input current No load 10 mA typ. Remote ON/OFF (See Note 1) Positive logic Start-up time 1 V/ms Undervoltage lockout 9.0-9.5 V typ. Track input voltage Pin 8 (See Note 6) ±0.3 Vin EMC CHARACTERISTICS Electrostatic discharge EN61000-4-2, IEC801-2 Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 GENERAL SPECIFICATIONS Efficiency See Tables on page 2 Insulation voltage Non-isolated Switching frequency Suffix ‘-W’ 300 kHz to 400 kHz Suffix ‘-L’ 200 kHz to 300 kHz Approvals and EN60950 standards UL/cUL60950 Material flammability UL94V-0 Dimensions (L x W x H) 34.80 x 15.75 x 9.00 mm 1.370 x 0.620 x 0.354 in Weight 5 g (0.18 oz) MTBF Telcordia SR-332 7,092,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, -40 ºC to +85 ºC (See Note 2) temperature Non-operating -40 ºC to +125 ºC MSL (‘Z’ suffix only) JEDEC J-STD-020C Level 3 PROTECTION Short-circuit Auto reset 20 A typ.
File Name: pth12010.pdf Rev (07): 19 Dec 2005 For the most current data and application support visit www.artesyn.com/powergroup/products.htm DC-DC CONVERTERS POLA Non-isolated 2 NEW Product NNootteess 1 Remote ON/OFF . Positive Logic ON: Pin 3 open; or V > Vin - 0.5 V OFF: Pin 3 GND; or V < 0.8 V (min - 0.2 V).
2 See Figures 1, 2 and 3 for safe operating curves for the PTH12010W and
Figures 6 and 7 for PTH12010L. 3 A 560 µF electrolytic input capacitor is required for proper operation. The capacitor must be rated for a minimum of 800 mA rms of ripple current. 4 An external output capacitor is not required for basic operation. Adding 330 µF of distributed capacitance at the load will improve the transient response. 5 1 A/µs load step, 50 to 100% I omax, Cout = 330 µF . 6 If utilized Vout will track applied voltage by ±0.3 V (up to Vo set point). 7 Tape and reel packaging only available on the surface-mount versions.
8 To order Pb-free (RoHS compatible) surface-mount parts replace the
mounting option ‘S’ with ‘Z’, e.g. PTH12010WAZ. To order Pb-free (RoHS compatible) through-hole parts replace the mounting option ‘H’ with ‘D’, e.g. PTH12010WAD. 9 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. PTH12010WAST Part Number System with Options Product Family Point of Load Alliance Compatible The ultra-wide output voltage trim range offers major advantages to users who select the PTH12010. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 1.2 V to 5.5 V for suffix ‘W’ and 0.8 Vdc to 1.8 Vdc for suffix ‘L’. When the PTH12010 converter leaves the factory the output has been adjusted to the default voltage of 1.2 V for the PTH12010W and 0.8 V for PTH12010L. OOuuttppuutt VVoollttaaggee AAddjjuussttmmeenntt ooff tthhee PPTTHH1122001100 SSeerriieess Output Current 01 = 12 A Packaging Options No Suffix = Trays T = Tape and Reel (7) Input Voltage 12 = 12 V Mechanical Package Always 0 Output Voltage Code W = Wide, L = Low Voltage Pin Option A = Through-Hole Std. Pin Length (0.140”) A = Surface-Mount Tin/Lead Solder Ball PTH12010 Mounting Optionl (8) D = Horizontal Through-Hole (Matte Sn) H = Horizontal Through-Hole (Sn/Pb) S = Surface-Mount (63/37 Sn/Pb pin solder material) Z = Surface-Mount (96.5/3.0/0.5 Sn/Ag/Cu pin solder material) EFFICIENCY TABLE - PTH12010L (IO = 8 A) OUTPUT VOLTAGE EFFICIENCY Vo = 1.8 V 89% Vo = 1.5 V 88% Vo = 1.2 V 86% Vo = 1.0 V 84% Vo = 0.8 V 82% EFFICIENCY TABLE - PTH12010W (IO = 8 A) OUTPUT VOLTAGE EFFICIENCY Vo = 5.0 V 94% Vo = 3.3 V 93% Vo = 2.5 V 91% Vo = 2.0 V 90% Vo = 1.8 V 89% Vo = 1.5 V 88% Vo = 1.2 V 86% OUTPUT INPUT OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODELPOWER VOLTAGE VOLTAGE CURRENT CURRENT (MAX.) LINE LOAD NUMBER (8,9) (MAX.) (MIN.) (MAX.) 66 W 10.8-13.2 Vdc 0.8-1.8 Vdc 0 A 12 A 89% ±10 mV ±12 mV PTH12010L 66 W 10.8-13.2 Vdc 1.2-5.5 Vdc 0 A 12 A 94% ±10 mV ±12 mV PTH12010W
File Name: pth12010.pdf Rev (07): 19 Dec 2005 For the most current data and application support visit www.artesyn.com/powergroup/products.htm DC-DC CONVERTERS POLA Non-isolated 3 NEW Product TEMPERATURE (ºC) Nat conv
100 LFM
200 LFM
400 LFM
OUTPUT CURRENT (A) 02468 1 0 1 2 TEMPERATURE (ºC) Nat conv OUTPUT CURRENT (A) 02468 1 0 1 2 Figure 2 - Safe Operating Area Vin = 12 V, Output Voltage = 3.3 V (See Note A) Figure 1 - Safe Operating Area Vin = 12 V, Output Voltage = 5 V (See Note A) EFFICIENCY (%) OUTPUT CURRENT (A) 5.0V 3.3V 2.5V 2.0V 1.8V 1.5V 100 0 2468 1 0 1 2 1.2V Vout Figure 4 - Efficiency vs Load Current Vin = 12 V (See Note B) TEMPERATURE (ºC) Nat conv OUTPUT CURRENT (A) 02468 1 0 1 2 Figure 3 - Safe Operating Area Vin = 12 V, Output Voltage ≤ 1.8 V (See Note A) PTH12010 A SOA curves represent the conditions at which internal components are within the Artesyn derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter. PTH12010W Characteristic Data Track 8910 PTH12010 (Top View) Margin Up Margin Down 543 GND GND L O A D Cin 560µF (Required) Vin Inhibit Cout 330µF (Optional) +RSET 1%, 0.1W (Required) Vout Vo Sense Figure 5 - Standard Application
For the most current data and application support visit www.artesyn.com/powergroup/products.htm DC-DC CONVERTERS POLA Non-isolated 4 NEW Product File Name: pth12010wl.pdf Rev (06): 07 Feb 2005 PTH12010 TEMPERATURE (ºC) OUTPUT CURRENT (A) 02468 1 0 Nat conv Figure 6 - Safe Operating Area Vin = 12 V, Output Voltage ≤ 1.8 V (See Note A) NNootteess A SOA curves represent the conditions at which internal components are within the Artesyn derating guidelines. B Characteristic data has been developed from actual products tested at 25 °C. This data is considered typical data for the converter.EFFICIENCY (%) OUTPUT CURRENT (A) 1.8V 1.5V 1.2V 1.0V 0.8V 100 02468 1 0 Vout Figure 7 - Efficiency vs Load Current Vin = 12 V (See Note B) PTH12010L Characteristic Data Track 8910 PTH12010 (Top View) Margin Up Margin Down 543 GND GND L O A D Cin 560µF (Required) Vin Inhibit Cout 330µF (Optional) +RSET 1%, 0.1W (Required) Vout Vo Sense Figure 8 - Standard Application
File Name: pth12010.pdf Rev (07): 19 Dec 2005 Please consult our website for the following items: Application Note www.artesyn.com Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. For the most current data and application support visit www.artesyn.com/powergroup/products.htm DC-DC CONVERTERS POLA Non-isolated 5 NEW Product 0.070 (1.78) (Standoff Shoulder) Lowest Component 0.010 min. (0.25) Bottom side Clearance TOP VIEW SIDE VIEW 1.370 (34.80) 0.620 3 54 10 9 81 MAX. 0.354 (9.00) Host Board (15.75) ø0.040 (1.02)
5 Places
0.375 (9.52) 0.125 (3.18) 0.625 (15.88) 0.125 (3.18) (1.52) 0.060 (12.70) 0.500 (1.52) 0.060 (3.55) 0.140 Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) TOP VIEW 1.370 (34.80) 0.620 3 54 10 9 81 (15.75) 0.375 (9.52) 0.125 (3.18) 0.625 (15.88) 0.125 (3.18) (1.52) 0.060 (12.70) 0.500 (1.52) 0.060 Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) Host Board Lowest Component 0.010 min. (0.25) Bottom side Clearance SIDE VIEW Solder Ball ø0.040 (1.02)
10 Places
*After solder reflow on customer board0.354 (9.00) max.* Figure 9 - Plated Through-Hole Mechanical Drawing Figure 10 - Surface-Mount Mechanical Drawing *Denotes negative logic: Open = Normal operation Ground = Function active PIN CONNECTIONS PIN NO. FUNCTION