PSA-6232 TELEDYNE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Frequency Range: 1000 to

4000 MHz

  • High Gain: 22 dB (T yp)
  • Noise Figure: 4.5 dB (T yp)

Applications

  • IF/RF Amplification
  • Input or Driver Stage
  • Instrumentation

Description

The 4132 Series is a two stage thin-film GaAs FET RF amplifier for high gain and low noise applications up to 4000 MHz. Low VSWR is maintained by resistive feedback and inductive tuning while the RF is coupled through the amplifier by inter - nal blocking capacitors. The bias port is reverse polarity protected and bypassed with 6800 pF . Pin Configuration PSA—SM-38 RF OUTRF IN GND

(Measured in 50 Ω system @ +8 VDC nominal unless otherwise noted) Typical Guaranteed SpecificationsSymbol Characteristic TC = 25 °C T C = 0 to 50 °C T C = –55 to +85 °C Unit GP Small Signal Gain (Min.) 22.0 20.0 19.0 dB — Gain Flatness (Max.) ±0.3 ±1.0 ±1.0 dB NF Noise Figure (Max.) 4.5* 5.5 6.5 dB — Input VSWR (Max.) 1.5:1 2.0:1 2.0:1 — — Output VSWR (Max.) 1.5:1 2.0:1 2.0:1 — IP3 Two Tone 3rd Order Intercept Point +29.0 — — dBm IP2 Two Tone 2nd Order Intercept Point +50.0 — — dBm HP2 One Tone 2nd Harmonic Intercept Point +55.0 — — dBm ID DC Current 150 — — mA * Specification applies at F greater than 1.0 GHz, NF @ 500 MHz = 6 dB typical. Typical Performance Over T emperature (@ +8 VDC unless otherwise noted) Key: +25°C +85°C –55°C 500 1500 2500 3500 4500 Noise Figure Noise Figure, dB Frequency, MHz 500 1500 2500 3500 4500 Gain Gain, dB Frequency, MHz 1.25 1.5 1.75 500 1500 2500 3500 4500 Output VSWR VSWR Frequency, MHz 1.25 1.5 1.75 500 1500 2500 3500 4500 Input VSWR VSWR Frequency, MHz 500 1500 2500 3500 4500 Power Output Power Output @ 1 dB Gain Compression, dBm Frequency, MHz 500 1500 2500 3500 4500 Third-Order Intercept Point IP 3 , dBm Frequency, MHz 500 1500 2500 3500 4500 Second-Order Intercept Point IP 2 , dBm Frequency, MHz 500 1500 2500 3500 4500 Second-Harmonic Intercept Point HP 2 , dBm Frequency, MHz PSA 4132 Series

Automatic Network Analyzer Measurements (Typical production unit @ 25 °C ambient) S–Parameters Bias = 8.00 V olts FREQ S11 S21 S12 S22 GPDEL PHASE MHz Mag Ang dB Ang dB Ang Mag Ang ns DEV LINEARIZATION RANGE: 1.0 to 4.0 GHz PSA 4132 Series

Blank = No Screening R = R-Series Screening PSA – 4132R 0.015–0.002 4 PL 0.040

0.160 MAX

0.370 SQ 0.005–0.001 0.094 4 PL 0.102 4 PL 0.050–0.010 8 PL 0.030 3 PL CL 0.015 4 PL 0.048 4 PL 0.375 SQ RF OUTRF IN GND 0.025 FULL RADII 4 PL NOTES (UNLESS OTHERWISE SPECIFIED): 1. MAXIMUM TEMPERATURE EXPOSURE IS 260 °C FOR 10 SECONDS. 2. LEADS ARE FOR TESTING ONL Y AND MA Y BE TRIMMED FLUSH. 3. DIMENSIONS ARE SPECIFIED IN INCHES 4. TOLERANCES: xxx ±.01 xxx ±.005 Contact Teledyne Cougar: 408-522-3838 408-522-3839 fax cougaramps@cougarcorp.com Check for updates: www.teledyne-cougar.com