PS9814-1

PS9814-1 CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

NEC's HIGH CMR ,

10 Mbps OPEN COLLECTOR

OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER PS9814-1,-2

FEATURES

• 40% REDUCTION OF MOUNTING AREA: 5-pin SOP × 2
• HIGH COMMON MODE TRANSIENT IMMUNITY: CMH, CML = ±20 kV/μs TYP.
• PULSE WIDTH DISTORTION: | tPHL−tPLH | = 3 ns TYP.
• HIGH-SPEED:

10 Mbps

• HIGH ISOLATION VOLTAGE: BV = 2 500 Vr.m.s.
• OPEN COLLECTOR OUTPUT
• ORDERING NUMBER OF TAPE PRODUCT: PS9814-1-F3, F4: 1 500 pcs/reel PS9814-2-F3, F4: 1 500 pcs/reel
• Pb-FREE PRODUCT
• SAFETY STANDARDS: UL approved: File No. E72422 DIN EN60747-5-2 (VDE0884 Part2) approved No.40008347 (option)

DESCRIPTION

NEC's PS9814-1 and PS9814-2 are active-low type high- speed optocouplers that use a GaAlAs light-emitting diode on the input side and a photodetector IC that includes a photodiode and a signal processor on the same chip on the output side. The PS9814-1, -2 are designed specifically for high common mode transient immunity (CMR) and low pulse width distortion, the PS9814-2 is suitable for high density applications. California Eastern Laboratories

APPLICATIONS

• Measurement Equipment
• PDP
• Industrial Automation LED OUTPUT ON L OFF H TRUTH TABLE The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. 1 2 3 4 8 7 6 5 PS9814-1 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 1 2 3 4 8 7 6 5 SHIELD SHIELD PS9814-2 1. Anode1 2. Cathode1 3. Cathode2 4. Anode2 5. GND 6. VO2 7. VO1 8. VCC PIN CONNECTION (Top View)

PS9814-1,-2 PACKAGE DIMENSIONS (UNIT: mm) MARKING EXAMPLES 1.27 0.1±0.1 3.95±0.1 6.0±0.2 0.5±0.3 0.15+0.10-0.05 5.21±0.25 3.27±0.2 0.10 S No. 1 pin Mark Initial of NEC (Engraved mark) PS9814-1 PS9814-2 No. 1 pin Mark Initial of NEC (Engraved mark) Assembly Lot N 9814-2 NL251 Week Assembled Assembly Lot N 9814-1 NL251 2 51 Year Assembled (Last 1 Digit) LN Rank Code In-house Code (L: Pb-Free) 2 51 Year Assembled (Last 1 Digit) LN Rank Code In-house Code (L: Pb-Free) Week Assembled

PS9814-1,-2

ORDERING INFORMATION

*1 For the application of the Safety Standard, following part number should be used. *2 With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. PART NUMBER ORDER NUMBER SOLDER PLATING SPECIFICATION PACKING STYLE SAFETY STANDARD APPROVAL APPLICATION PART NUMBER*1 PS9814-1 PS9814-1-A Pb-Free*2 20 pcs (Tape 20 pcs cut) Standard products (UL approved) PS9814-1 PS9814-1-F3 PS9814-1-F3-A Embossed Tape 1 500 pcs/reel PS9814-1-F4 PS9814-1-F4-A PS9814-2 PS9814-2-A 20 pcs (Tape 20 pcs cut) PS9814-2 PS9814-2-F3 PS9814-2-F3-A Embossed Tape 1 500 pcs/reel PS9814-2-F4 PS9814-2-F4-A PS9814-1-V PS9814-1-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) PS9814-1 PS9814-1-V-F3 PS9814-1-V-F3-A Embossed Tape 1 500 pcs/reel PS9814-1-V-F4 PS9814-1-V-F4-A PS9814-2-V PS9814-2-V-A 20 pcs (Tape 20 pcs cut) PS9814-2 PS9814-2-V-F3 PS9814-2-V-F3-A Embossed Tape 1 500 pcs/reel PS9814-2-V-F4 PS9814-2-V-F4-A

PS9814-1,-2 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) *1 Reduced to 0.3 mA/ °C at TA = 60°C or more. *2 Reduced to 0.1 mA/ °C at TA = 60°C or more. *3 Applies to output pin V O. Reduced to 1.5 mW/°C at TA = 65°C or more. *4 AC voltage for 1 minute at T A = 25°C, RH = 60% between input and output. RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL RATINGS UNIT PS9814-1 PS9814-2 Diode Forward Current IF 20*1 15*2 mA Reverse Voltage VR 5 V/ch Detector Supply Voltage VCC 7 V Output Voltage VO 7 V/ch Output Current IO 25 mA/ch Power Dissipation*3 PC 40 mW/ch Isolation Voltage*4 BV 2 500 Vr.m.s. Operating Ambient Temperature TA –40 to +85 °C Storage Temperature Tstg –55 to +125 °C PARAMETER SYMBOL MIN. TYP. MAX. UNIT Low Level Input Voltage VFL 0 0.8 V High Level Input Current IFH 6.3 10 12.5 mA Supply Voltage VCC 4.5 5.0 5.5 V Pull-up Resistance RL 330 4 k Ω TLL (RL = 1 kΩ, loads) N 5

PS9814-1,-2 ELECTRICAL CHARACTERISTICS (TA = -40 to +85ºC, unless otherwise specified) PARAMETER SYMBOL CONDITIONS MIN. TYP. *1 MAX. UNIT Diode Forward Voltage VF IF = 10 mA, TA = 25°C 1.4 1.65 1.8 V Reverse Current IR VR = 3 V, TA = 25°C 10 μA Terminal Capacitance Ct V = 0 V, f = 1 MHz, TA = 25°C 30 pF Detector High Level Output Current IOH VCC = VO = 5.5 V, VF = 0.8 V 0.02 250 μA Low Level Output Voltage*2 VOL VCC = 5.5 V, IF = 5 mA, IOL = 13 mA 0.15 0.6 V High Level Supply Current (PS9814-1) ICCH VCC = 5.5 V , IF = 0 mA, VO = open 3 8 mA High Level Supply Current (PS9814-2) 6 15 Low Level Supply Current (PS9814-1) ICCL VCC = 5.5 V , IF = 10 mA, VO = open 7.0 11 Low Level Supply Current (PS9814-2) 14 21 Coupled Threshold Input Current (H → L) IFHL VCC = 5 V, VO = 0.8 V, RL = 350 Ω 2 5 mA Input-Output Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60%, TA = 25°C 1011 Ω Insulation Resistance (Input-Input), (PS9814-2) RI-I VI-I = 1 kVDC, RH = 40 to 60%, TA = 25°C 1010 Input-Output Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25°C 0.6 pF Insulation Capacitance (Input-Input), (PS9814-2) CI-I 0.3 Propagation Delay Time (H → L)*3 tPHL TA = 25°C 54 75 ns VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 100 Propagation Delay Time (L → H)*3 tPLH TA = 25°C 51 75 VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 100 Rise Time tr VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 20 Fall Time tf VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 10 Pulse Width Distortion (PWD) *3 | tPHL−tPLH | VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 3 50 Propagation Delay Skew tPSK VCC = 5 V, RL = 350 Ω, IF = 7.5 mA 60 Common Mode Transient Immunity at High Level Output*4 CMH VCC = 5 V, RL = 350 Ω, TA = 25°C, IF = 0 mA, VO > 2 V, VCM = 1 kV 10 20 kV/μs Common Mode Transient Immunity at Low Level Output*4 CML VCC = 5 V, RL = 350 Ω, TA = 25°C, IF = 7.5 mA, VO < 0.8 V, VCM = 1 kV 10 20 *1 Typical values at T A = 25°C *2 Because V OL of 2 V or more may be output when LED current input and when output supply of VCC = 2.6 V or less, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device.

PS9814-1,-2 *3 Test circuit for propagation delay time PS9814-1 SHIELD SHIELD PS9814-2 Input Output 50% 1.5 V VOL tPHL tPLH (IF = 7.5 mA) VCC = 5 V 0.1 F CL = 15 pF 47 Ω RL = 350 Ωµ VCC = 5 V 0.1 F CL = 15 pF47 Ω RL = 350 Ω µ Pulse input (IF)(PW = 1 s, Duty cycle = 1/10) Input (Monitor) µ VO (Monitor) VO (Monitor) Pulse input (IF)(PW = 1 s, Duty cycle = 1/10) Input (Monitor) µ Remark C L includes probe and stray wiring capacitance. *4 Test circuit for common mode transient immunity 90% 10% 1 kV 0 V VOH 2 V 0.8 V VOL VCM VO (IF = 0 mA) VO (IF = 7.5 mA) tr tf SW IF VO (Monitor) VCC = 5 V

0.1 F RL = 350 Ω

µ CL = 15 pF SHIELD SHIELD VO (Monitor) VCC = 5 V 0.1 F RL = 350 Ω VCM µ SW IF CL = 15 pF PS9814-2 USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity.

PS9814-1,-2 TYPICAL CHARACTERISTICS (TA = 25ºC, unless otherwise specified) 20 40 60 80 1000 85 Ambient Temperature TA (ºC) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 20 40 60 80 85 1000 Ambient Temperature TA (ºC) Detector Power Dissipation PC (mW) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 1.0 0.01 0.1 100 TA = +85ºC +50ºC +25ºC 0ºC -25ºC Forward Voltage VF (V) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE -50 -25 0 25 50 7 5 1000 ICCL (IF = 10 mA), PS9814-2 ICCH (IF = 0 mA), PS9814-1 ICCH (IF = 0 mA), PS9814-2 ICCL (IF = 10 mA), PS9814-1 Ambient Temperature TA (ºC) High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) SUPPLY CURRENT vs. AMBIENT TEMPERATURE 1 2 3 4 5 6 RL = 350 Ω VCC = 5.0 V, TA = 25ºC 1.0 kΩ 4.0 kΩ, 4.7 kΩ Input Current IF (mA) Output Voltage VO (V) OUTPUT VOLTAGE vs. INPUT CURRENT -50 -25 0 25 50 7 5 100 IF = 5.0 mA, VCC = 5.5 V 0.6 0.5 0.4 0.3 0.2 0.1 13.0 mA 10.0 mA 6.0 mA IOL = 16.0 mA Ambient Temperature TA (ºC) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE PS9814-1 PS9814-2

PS9814-1,-2 Remark The graphs indicate nominal characteristics. VCC = 5.0 V, VO = 0.6 V 0-50 -25 0 25 50 7 5 100 1.0 kΩ RL = 350 Ω 4.7 kΩ, 4.0 kΩ Ambient Temperature TA (ºC) Threshold Input Current IFHL (mA) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE 120 100 -50 -25 0 25 50 7 5 100 IF = 7.5 mA, VCC = 5.0 V tPLH: RL = 4.7 kΩ tPHL: RL = 4.7 kΩ tPHL: RL = 4.0 kΩ tPLH: RL = 4.0 kΩ Ambient Temperature TA (ºC) Propagation Delay Time tPHL, tPLH (ns) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE Ambient Temperature TA (ºC) Switching Time tr, tf (ns) SWITCHING TIME vs. AMBIENT TEMPERATURE -50 -25 0 25 50 7 5 100 IF = 7.5 mA, VCC = 5.0 V 400 300 200 100 tr: RL = 4.0 kΩ, 4.7 kΩ tr: RL = 1.0 kΩ tr: RL = 350 Ω tf: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ, 4.7 kΩ Input Current IF (mA) Propagation Delay Time tPHL, tPLH (ns) PROPAGATION DELAY TIME vs. INPUT CURRENT 151311975 VCC = 5.0 V, TA = 25ºC 120 100 tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ tPLH: RL = 350 Ω Ambient Temperature TA (ºC) Propagation Delay Time tPHL, tPLH (ns) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE 100 0-50 -25 0 25 50 7 5 100 IF = 7.5 mA, VCC = 5.0 V tPHL: RL = 350 Ω, 1.0 kΩ tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω Ambient Temperature TA (ºC) Pulse Width Distortion tPHLñtPLH (ns) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE -50 -25 0 2 5 4.0 kΩ 50 75 100 IF = 7.5 mA, VCC = 5.0 V RL = 4.7 kΩ RL = 350 Ω 1.0 kΩ

PS9814-1,-2 Remark The graphs indicate nominal characteristics. TAPING SPECIFICATIONS (Units in mm) 4.05 MAX. Outline and Dimensions (Reel) Packing: 1,500 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 330±2.0 φ 100±1.0 φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 13.0±0.2φ 1.7±0.1 2.0±0.05 4.0±0.1 1.75±0.1 6.4±0.1 5.56±0.1 0.3±0.058.0±0.1 1.5+0.1 5.5±0.1 12.0±0.2 3.6±0.1 Outline and Dimensions (Tape) Taping Direction PS9814-1-F3 PS9814-2-F3 PS9814-1-F4 PS9814-2-F4

PS9814-1,-2 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT:mm) 1.45 0.81.27 5.25

PS9814-1,-2 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering

• Peak reflow temperature 260 °C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 ±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120 °C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350 °C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. 120±30 s (preheating) 220ºC 180ºC Package Surface Temperature T (ºC) Time (s) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s to 60 s 260ºC MAX. 120ºC

PS9814-1,-2 (4) Cautions

• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. A Business Partner of NEC Compound Semiconductor Devices, Ltd. 02/07/2005