PS9713

PS9713 CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

FEATURES

• HIGH INSTANTANEOUS COMMON MODE REJECTION VOLTAGE CM H, CML = ±15 kV/µs MIN
• HIGH SPEED RESPONSE tPHL= 500 ns MAX, tPLH = 750 ns MAX
• MAXIMUM PROPAGATION DELAYS tPLH- tPHL = 270 ns TYP
• PULSE WIDTH DISTORTION | tPHL- tPLH | = 270 ns TYP
• SMALL THIN PACKAGE 5-pin SOP
• TAPING PRODUCT NUMBER PS9713-F3, F4: 3,500 pcs/reel

DESCRIPTION

PS9713 is an optically coupled isolator containing a GaAIAs LED on the input side and a photo diode and a signal process- ing circuit on the output side on one chip. PS9713

1 Mbps, OPEN-COLLECTOR

OUTPUT FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER

APPLICATIONS

• IPM DRIVER
• GENERAL PURPOSE INVERTER California Eastern Laboratories ELECTRICAL CHARACTERISTICS1 (TA = -40 to +100°C, VCC = 15 V unless otherwise specified) PART NUMBER PS9713 SYMBOL PARAMETERS UNITS MIN TYP MAX VF Forward Voltage, IF = 10 mA V 1.3 1.65 2.1 IR Reverse Current, VR = 3 V µA 200 Ct Terminal Capacitance, V = 0 V, f = 1 MHz, TA = 25°Cp F 3 0 VOL Low Level Output Voltage V 0.13 0.6 IF = 10 mA, Vcc = 5 V, IO = 2.4 mA IOH High Level Output Current µA 1.0 50 Vcc = 30 V, VF = 0.8 V ICCH High Level Supply Current, VCC = 30 V, VF = 0.8 V, V0 = open mA 0.6 1.3 ICCL Low Level Supply Current, VCC = 30 V, IF = 10 mA, V0 = open mA 0.6 1.3 IFHL Threshhold Input Current (High→ Low), mA 1.5 5.0 VO = 0.8 V, Io = 0.75 mA CTR Current Transfer Ratio, I F = 10 mA, Vo = 0.6 V % 44 110 RI-O Isolation Resistance, VI-O = 1 k VDC, RH = 40 to 60%, TA = 25°C Ω 1011 CI-O Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°Cp F 0.6 tPHL Propagation Delay Time2, High → Low ns 250 500 IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V tPLH Propagation Delay Time2, High → Low ns 520 750 IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V tPLH-tPHL Maximum Propagation Delays ns -200 270 650 IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V |tPLH-tPHL| Pulse Width Distortion (PWD)2 ns 270 650 IF = 10 mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V CMH Instantaneous Common Mode Rejection Voltage (Output:High)3 kV/µs1 5 TA = 25°C, IF = 0 mA,VO > = 3.0 V, VCM = 1.5 kV, RL = 20 kΩ, CL = 100 pF CML Instantaneous Common Mode Rejection Voltage (Output:High)3 kV/µs1 5 TA = 25°C, IF = 10 mA,VO < = 1.0 V, VCM = 1.5 kV, RL = 20 kΩ, CL = 100 pF Notes: See Next Page Diode Detector Coupled

*CL includes probe and stray wiring capacitance. RECOMMENDED OPERATING CONDITIONS PART NUMBER PS9713 SYMBOLS PARAMETERS UNITS MIN TYP MAX IFH High Level Input Current mA 10 20 Vo Output Voltage V 0 30 VCC Supply Voltage V 4.5 30 VF LED off Voltage V 0 0.8 Notes: 1. Typical values at TA = 25 ºC. 2. Test Circuit for Propagation delay time 3. Test circuit for common mode transient immunity VCM 90% 10% VO (Switch A: IF = 0 mA) (Switch B: IF = 10 mA) VO 15 V 3.0 V 1.0 V VOL tftr 0 V 1.5 kV tPLHtPHL Input Output 0 V 15 V VTHLH = 2.0 VVTHHL = 1.5 V VOL IF = (ON) 50 % IF = (ON) 0.01 µF A B GLL SW IF VCC = 15 V R L = 20 kΩ VO = Monitor C L* 100 pF VCM ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current mA 25 VR Reverse Voltage V 3.0 Detector VCC Supply Voltage V -0.5 to +35 VO Output Voltage V -0.5 to +35 IO Output Current mA 15 PC Power Dissipation mW 100 Coupler BV Isolation Voltage 2 Vr.m.s. 2500 TA Operating Ambient Temp. °C -40 to +100 TSTG Storage Temperature °C -55 to +125 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input and output. PART PACKAGE PACKING STYLE NUMBER PS9713 5-pin SOP Magazine case 100 pcs PS9713-F3 Embossed Tape 3500 pcs/reel PS9713-F4 PS9713-V Magazine case 100 pcs PS9713-V-F3 Embossed Tape 3500 pcs/reel

ORDERING INFORMATION

0.01 µF Input (Monitor) Pulse Input (I F = 10 mA) VCC = 15 V R L = 20 kΩ VO = Monitor C L* 100 pF 47 Ω PW = 10 µs Duty Cycle = 1/10( ) USAGE CAUTION Bypass capacitor of more than 0.1 µF is used between VCC and GND near device. Also, ensure that the distance beteen the leads of the photocoupler and capacitor is no more than 10 mm.

OUTLINE DIMENSIONS (Units in mm) PS9713 4.0±0.5 1.27 0.1 ± 0.1 2.1 ± 0.2 0.4+0.10 -0.05 0.25 M 0.15+0.10 -0.05 7.0 ± 0.3 0.5 ± 0.3 4.4 FUNCTIONAL DIAGRAM PS9713 Shield LED OUTPUT ON L OFF H PS9713 TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) FORWARD CURRENT vs. FORWARD VOLTAGE Forward Current, I F (mA) High Level Supply Current, I CCH (µA), Low Level Supply Current, I CCL (µA) Forward Voltage, VF (V) Ambient Temperature, TA (…C) SUPPLY CURRENT vs. AMBIENT TEMPERATURE 100 0.1 0.01 TA = +85 ºC +50 ºC +25 ºC 0 ºC -25 ºC –50 –25 25 50 75 100 200 400 600 800 1000 1200 VCC = 30 V, VO = Open, ICCH : F = 0.8 V, ICCL : IF = 10 mA ICCL ICCH Detector Power Dissipation, P C (mW) Maximum Forward Current, I F (mA) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Ambient Temperature, TA (…C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (…C) 02 0 4 0 6 08 0 100 02 0 40 60 80 100 150 100 1. Anode 3. Cathode 4. GND 5. V O 6. VCC

TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) Ambient Temperature, TA (…C) Threshold Input Current, I FHL (mA) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (…C) Low Level Output Voltage, V OL (V) LOW LEVEL OUTPPUT VOLTAGE vs. AMBIENT TEMPERATURE –50 –25 25 50 75 100 VCC = 15 V, VO = 0.8 V, IO = 0.75 mA –50 –25 25 50 75 100 0.1 0.2 0.3 0.4 0.5 0.6 VCC = 15 V, IF = 10 mA, IO = 2.4 mA Forward Current, IF (mA) Supply Voltage, VCC (V) Output Current (Relative Value) Output Current, I O (mA) OUTPUT CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (…C) OUTPUT CURRENT vs. FORWARD CURRENT Forward Current, IF (mA) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. FORWARD CURRENT Propagation Delay Time, t PHL , t PLH (ns) Maximum Propagtion Delays t PLH – tPHL (ns) Propagation Delay Time, t PHL , t PLH (ns) Maximum Propagtion Delays t PLH – tPHL (ns) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. SUPPLY VOLTAGE 0051 0 1 5 2 0 VO = 0.6 V TA = +25 ºC +100 ºC –40 ºC 14 1.10 1.05 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0–40 –20 20 40 60 80 100 IF = 10 mA VO = 0.6 V 100 200 300 400 500 600 700 0051 0 1 5 VCC = 15 V, CL = 100 pF, RL = 20 kΩ tPLH tPLH – tPHL tPHL IF = 10 mA, CL = 100 pF, RL = 20 kΩ tPLH tPLH – tPHL –200 200 400 600 800 1000 1400 1200 1600 1800 10 20 30 tPHL

TYPICAL PERFORMANCE CURVES (TA = 25°C) Propagation Delay Time, t PHL , t PLH (ns) Maximum Propagtion Delays t PLH – tPHL (ns) Propagation Delay Time, t PHL , t PLH (ns) Maximum Propagtion Delays t PLH – tPHL (ns) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE Load Resistance, RL (kΩ) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE Load Resistance, RL (kΩ) IF = 10 mA, VCC = 15 V, CL = 100 pF 0 10 20 30 40 50 1000 800 600 400 200 –200 tPLH tPHL tPHL – tPLH IF = 10 mA, VCC = 5 V, CL = 15 pF 05 15 25 10 20 500 450 400 350 300 250 150 100 200 tPLH tPHL tPHL – tPLH Ambient Temperature, TA (…C) Propagation Delay Time, t PHL , t PLH (ns) Pulse Width Distortion | t PLH – tPHL | (ns) Load Capacitance, CL (pF)Propagation Delay Time, t PHL , t PLH (ns) PROPAGATION DELAY TIME vs. LOAD CAPACITANCE 0 0–20–40 80 100 100 200 300 400 500 600 700 40 6020 IF = 10 mA, VCC = 15 V, CL = 100 pF, RL = 20 kΩ tPLH tPHL PWD 00 100 200 200 600 300 400 400 1000 1200 1400 1600 800 500 IF = 10 mA, VCC = 15 V, RL = 20 kΩ tPLH tPHL PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE

TAPING SPECIFICATIONS (Units in mm) TAPE DIRECTION PS9713-F3 PS9713-F4 OUTLINE AND DIMENSIONS (REEL) Packing : 3500 pcs/reel F3, F4 OUTLINE AND DIMENSIONS (TAPE) 2.0 ± 0.1 1.55 ± 0.1 8.0 ± 0.1 4.6 ± 0.1 2.4 ± 0.1 0.3 5.5 ± 0.1 7.4 ± 0.1 1.75 ± 0.1 1.5 ± 0.5 12.4 +2.0 -0.0 φ21.0 ± 0.8 6.0 ± 1 120° PS8701-E3, E4: φ178 PS8701-F3, F4: φ 330 φ66 φ13.0±0.5 60°

18.4 MAX

1.5 ± 0.1 1.5 ± 0.1

RECOMMENDED SOLDERING CONDITIONS Recommended Temperature Profile of Infrared Reflow (1) Infrared reflow soldering

• Peak reflow temperature 235 ˚C (package surface temperature)
• Time of temperature higher than 210 ˚C 30 seconds or less
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a max. chlorine content of 0.2 Wt % is recommended (2) Dip soldering
• Temperature 260 ˚C or below (molten solder temperature)
• Time 10 seconds or less
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a max. chlorine content of 0.2 Wt % is recommended.) (3) Cautions
• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Time (s) Package Surface Temperature T (˚C) 100 to 160 ˚C 60 to 120 s (preheating) (heating) to 10 s to 30 s 235 ˚C (peak temperature) 210 ˚C EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 08/30/2001DATA SUBJECT TO CHANGE WITHOUT NOTICE