PS9687L2

PS9687L1 CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

PS9687L1,PS9687L2 −NEPOC Series− HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP PHOTOCOUPLER FOR CREEPAGE DISTANCE OF 8 mm

DESCRIPTION

The PS9687L1 and PS9687L2 are optically coupled isolators containing a GaAl As LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9687L1 and PS9687L2 are designed specifically for long creepage-distance as well as high common mode transient immunity (CMR) and high speed digital output ty pe. Consequently, they are suitable for high speed logic interface that needs long creepage-distance (8 mm) on mounting. The PS9687L1 is in a plastic DIP (Dual In-line Pack age) and the PS9687L2 is lead bending ty pe (Gull-wing) for surface mounting.

FEATURES

(Top View) 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC1 2 43 6 58 7

• Long creepage distance (8 mm MIN.)
• High common mode transient immunity (CMH, CML = ±20 kV/µs TYP.)
• High isolation voltage (BV = 5 000 Vr.m.s.)
• High-speed response (10 Mbps)
• Pulse width distortion (⏐tPHL − tPLH⏐ = 15 ns TYP.)
• Open collector output
• Ordering number of tape product: PS9687L2-E3, E4: 1 000 pcs/reel
• Safety standards
• UL approved: File No. E72422
• BSI approved: No. 8990/8991
• DIN EN60747-5-2 (VDE0884 Part2) approved: No.40008906 (Option)

APPLICATIONS

• FA Network
• Measurement equipment
• PDP Document No. PN10573EJ01V0DS (1st edition) Date Published July 2005 CP(K)

PS9687L1,PS9687L2 PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS9687L1 6.5±0.5 0 to 15˚ 10.16 2.54 0.84±0.43 3.5±0.3 0.25 M 0.50±0.15 9.25+0.5 –0.25 Lead Bending Type PS9687L2 6.5±0.5 0.9±0.25 11.8±0.4 0.25±0.2 2.54 0.25 M 0.5±0.15 3.5±0.3 0.84±0.43 9.25+0.5 –0.25 Data Sheet PN10573EJ01V0DS 2

PS9687L1,PS9687L2 FUNCTIONAL DIAGRAM LED Output ON L OFF H Shield MARKING EXAMPLE PS9687 NL503 Week Assembled Year Assembled (Last 1 Digit) Rank Code Type Number Assembly Lot N JAPAN N L In-house Code (L: Pb-Free) 5No. 1 pin Mark Initial of NEC (Engraved mark) Data Sheet PN10573EJ01V0DS 3

PS9687L1,PS9687L2

ORDERING INFORMATION

Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number* PS9687L1 PS9687L1-A Pb-Free Magazine case 50 pcs Standard products PS9687L1 PS9687L2 PS9687L2-A (UL, BSI approved) PS9687L2 PS9687L2-E3 PS9687L2-E3-A Embossed Tape 1 000 pcs/reel PS9687L2-E4 PS9687L2-E4-A PS9687L1-V PS9687L1-V-A Magazine case 50 pcs PS9687L1 PS9687L2-V PS9687L2-V-A PS9687L2 PS9687L2-V-E3 PS9687L2-V-E3-A Embossed Tape 1 000 pcs/reel PS9687L2-V-E4 PS9687L2-V-E4-A DIN EN60747-5-2 (VDE0884 Part2) approved (Option) *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current IF 30 mA Reverse Voltage VR 5 V Detector Supply Voltage VCC 7 V Output Voltage VO 7 V Output Current IO 25 mA Power Dissipation PC 40 mW Isolation Voltage BV 5 000 Vr.m.s. Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −55 to +125 °C *1 Reduced to 0.3 mA/°C at TA = 25°C or more. *2 Applies to output pin VO (Collector pin). Reduced to 1.5 mW/°C at TA = 65°C or more. *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit High Level Input Current IFH 6.3 10 12.0 mA Low Level Input Voltage VFL 0 0.8 V Supply Voltage VCC 4.5 5.0 5.5 V TTL (RL = 1 kΩ, loads) N 5 Pull-up Resistance RL 330 4 k Ω Data Sheet PN10573EJ01V0DS 4

PS9687L1,PS9687L2 ELECTRICAL CHARACTERISTICS (TA = −40 to +85°C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF IF = 10 mA, TA = 25°C 1.4 1.65 1.8 V Reverse Current IR VR = 3 V, TA = 25°C 10 µA Terminal Capacitance Ct VF = 0 V, f = 1 MHz, TA = 25°C 30 150 pF Detector High Level Output Current IOH VCC = VO = 5.5 V, VF = 0.8 V 1 100 µA Low Level Output Voltage VOL VCC = 5.5 V, IF = 5 mA, IOL = 13 mA 0.35 0.6 V High Level Supply Current ICCH VCC = 5.5 V, IF = 0 mA, VO = Open 6 10 mA Low Level Supply Current ICCL VCC = 5.5 V, IF = 10 mA, VO = Open 11 13 mA Coupled Threshold Input Current (H → L) IFHL VCC = 5 V, VO = 0.8 V, RL = 350 Ω 2.5 5 mA Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60%, TA = 25°C 10 Ω Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25°C 0.9 5 pF Propagation Delay Time tPHL VCC = 5 V, TA = 25°C 40 75 ns (H → L) RL = 350 Ω, IF = 7.5 mA, CL = 15 pF 100 Propagation Delay Time tPLH TA = 25 °C 55 75 ns (L → H) 100 Rise Time tr 20 ns Fall Time tf 10 ns Pulse Width Distortion (PWD) ⏐tPHL-tPLH⏐ 15 50 ns Propagation Delay Skew tPSK 60 ns Common Mode Transient Immunity at High Level Output CMH VCC = 5 V, TA = 25°C, IF = 0 mA, VO (MIN.) = 2 V, VCM = 1 kV, RL = 350 Ω 10 20 kV/µs Common Mode Transient Immunity at Low Level Output CML VCC = 5 V, TA = 25°C, IF = 7.5 mA, VO (MAX.) = 0.8 V, VCM = 1 kV, RL = 350 Ω 10 20 kV/µs Data Sheet PN10573EJ01V0DS 5

PS9687L1,PS9687L2 *1 Typical values at TA = 25°C *2 Because VOL of 2 V or more may be output when LED current is input and when output power supply is on and off, confirm the characteristics (operation with the power supply on and off) during design, before using this device. *3 Test circuit for propagation delay time Input Output 1.5 V VOH VOL tPHL tPLH (IF = 7.5 mA) 50% 0 V 5 V Remark CL includes probe and stray wiring capacitance. 47 Ω Pulse input (IF) Input (monitor) (PW = 1 s, Duty cycle = 1/10) µ RL = 350 Ω VO (monitor) VCC = 5 V 0.1 Fµ CL = 15 pF *4 Test circuit for common mode transient immunity 90% 10% 1 kV 0 V VOH 2 V 0.8 V VOL VCM VO (IF = 0 mA) VO (IF = 7.5 mA) tr tf VO (monitor) VCC = 5 V 0.1 Fµ CL = 15 pF VCM RL = 350 Ω SW IF Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static el ectricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By -pass capacitor of more than 0.1 µF is used between VCC and GND near device. Al so, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. Data Sheet PN10573EJ01V0DS 6

PS9687L1,PS9687L2 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) 20 40 60 80 1000 85 20 40 60 80 85 1000 1.0 0.01 0.1 100 TA = +85˚C +50˚C +25˚C 0˚C –25˚C –50 –25 0 25 50 75 100 ICCL (IF = 10 mA) Vcc = 5.5 V ICCH (IF = 0 mA) 1 2 3 4 5 RL = 350 Ω VCC = 5.0 V 1.0 kΩ 4.0 kΩ MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Maximum Forward Current IF (mA) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE Forward Current IF (mA) Forward Voltage VF (V) OUTPUT VOLTAGE vs. FORWARD CURRENT Output Voltage VO (V) Forward Current IF (mA) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Detector Power Dissipation PC (mW) Ambient Temperature TA (˚C) SUPPLY CURRENT vs. AMBIENT TEMPERATURE High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) Ambient Temperature TA (˚C) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE Low Level Output Voltage VOL (V) Ambient Temperature TA (˚C) –50 –25 0 25 50 75 100 IF = 5.0 mA, VCC = 5.5 V 0.6 0.5 0.4 0.3 0.2 0.1 13.0 mA 10.0 mA 6.0 mA IOL = 16.0 mA Remark The graphs indicate nominal characteristics. Data Sheet PN10573EJ01V0DS 7

PS9687L1,PS9687L2 VCC = 5.0 V, VO = 0.8 V 250 200 150 100 –50 –25 0 25 50 75 100 –50 –25 0 25 50 75 100 –50 –25 0 25 50 75 100 –50 –25 0 25 50 75 100 1.0 kΩ RL = 350 Ω IF = 7.5 mA, VCC = 5.0 V IF = 7.5 mA, VCC = 5.0 V tr:RL = 4.0 kΩ tr:RL = 350 Ω tf:RL = 350 Ω, 1.0 kΩ, 4.0 kΩ tr:RL = 1.0 kΩ RL = 1.0 kΩ RL = 350 Ω RL = 4.0 kΩ 4.0 kΩ IF = 7.5 mA, VCC = 5.0 V tPLH: RL = 350 Ω tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE Threshold Input Current IFHL (mA) Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE 100 Pulse Width Distortion tPHL–tPLH (ns) PROPAGATION DELAY TIME vs. FORWARD CURRENT Propagation Delay Time tPHL, tPLH (ns) Forward Current IF (mA) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE Propagation Delay Time tPHL, tPLH (ns) Ambient Temperature TA (˚C) SWITCHING TIME vs. AMBIENT TEMPERATURE Switching Time tr, tf (ns) Ambient Temperature TA (˚C) Pulse Width Distortion tPHL–tPLH (ns) Forward Current IF (mA) 100 120 140 5 7.5 10 12.5 15 17.5 20 VCC = 5.0 V 120 100 tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ 2017.51512.57.5 105 VCC = 5.0 V 100 RL = 4.0 kΩ RL = 350 Ω RL = 1.0 kΩ PULSE WIDTH DISTORTION vs. FORWARD CURRENT Remark The graphs indicate nominal characteristics. Data Sheet PN10573EJ01V0DS 8

PS9687L1,PS9687L2 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Reel) Packing: 1 000 pcs/reel 330±2.0 100±1.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 2.0±0.5 23.9 to 27.4 Outer edge of flange 25.5±1.0 29.5±1.0 Tape Direction Pull-out direction PS9687L2-E3 PS9687L2-E4 Outline and Dimensions (Tape) 2.05±0.05 2.0±0.1 4.0±0.1 1.75±0.1 24.0±0.3 10.7±0.1 12.0±0.1 1.5 +0.1 –0 4.5 MAX. 12.8±0.1 4.1±0.1 0.3±0.05 11.5±0.1 Data Sheet PN10573EJ01V0DS 9

PS9687L1,PS9687L2 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 ±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 120±30 s (preheating) 220˚C 180˚C Package Surface Temperature T (˚C) Time (s) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s to 60 s 260˚C MAX. 120˚C (2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350°C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100°C Data Sheet PN10573EJ01V0DS 10

PS9687L1,PS9687L2 (4) Cautions

• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector- emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10573EJ01V0DS 11

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZ Lead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.