PS9613L

PS9613 CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

PS9613,PS9613L

1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE

8-PIN DIP PHOTOCOUPLER −NEPOC Series−

DESCRIPTION

The PS9613 and PS9613L are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9613 is in a plastic DIP (Dual In-line Package) and the PS9613L is lead bending type (Gull-wing) for surface mounting.

FEATURES

• High common mode transient immunity (CMH, CML = ±15 kV/µs MIN.)
• High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
• Maximum propagation delays (tPLH − tPHL = 270 ns TYP.)
• Pulse width distortion ( | tPHL − tPLH | = 270 ns TYP.)
• Ordering number of tape product: PS9613L-E3, E4: 1 000 pcs/reel
• Safety standards
• UL approved: File No. E72422 (S)
• VDE0884 approved (Option) : No.91877

APPLICATIONS

• IPM Driver
• General purpose inverter The mark  shows major revised points. Document No. PN10073EJ02V0DS (2nd edition) Date Published February 2003 CP(K)

PS9613,PS9613L PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS9613 9.25±0.25 6.5±0.5 0 to 15˚ 7.62 2.54 0.84±0.43 3.5±0.30.65 4.15±0.32.8 MIN. 1.25±0.15 0.25 M 0.5±0.1 0.88±0.1 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 12 43 6587 TOP VIEW Lead Bending Type PS9613L 6.5±0.5 0.9±0.25 9.60±0.42.54 0.25 M 1.25±0.153.5±0.3 9.25±0.25 0.88±0.1 0.1 +0.1 –0.05 0.25 +0.1 –0.05 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 12 43 6587 TOP VIEW Data Sheet PN10073EJ02V0DS 2

PS9613,PS9613L FUNCTIONAL DIAGRAM LED Output ON L OFF H Shield MARKING EXAMPLE PS9613 M003 No. 1 pin Mark M Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code 0 03 Country Assembled Type Number Assembly Lot Data Sheet PN10073EJ02V0DS 3

PS9613,PS9613L ORDERING INFORMATION (Solder Contains Lead) Part Number Package Packing Style Safety Standards Approval Application Part Number*1 PS9613 8-pin DIP Magazine case 50 pcs Approved products PS9613 PS9613L other than VDE PS9613L PS9613L-E3 Embossed Tape 1 000 pcs/reel PS9613L-E4 PS9613-V Magazine case 50 pcs VDE0884 approved PS9613 PS9613L-V (Option) PS9613L PS9613L-V-E3 Embossed Tape 1 000 pcs/reel PS9613L-V-E4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number Package Packing Style Safety Standards Approval Application Part Number*1 PS9613-A 8-pin DIP Magazine case 50 pcs Approved products PS9613 PS9613L-A other than VDE PS9613L PS9613L-E3-A Embossed Tape 1 000 pcs/reel PS9613L-E4-A PS9613-V-A Magazine case 50 pcs VDE0884 approved PS9613 PS9613L-V-A (Option) PS9613L PS9613L-V-E3-A Embossed Tape 1 000 pcs/reel PS9613L-V-E4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10073EJ02V0DS 4

PS9613,PS9613L ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current IF 25 mA Reverse Voltage VR 3.0 V Detector Supply Voltage VCC −0.5 to +35 V Output Voltage VO −0.5 to +35 V Output Current IO 15 mA Power Dissipation PC 100 mW Isolation Voltage BV 5 000 Vr.m.s. Operating Ambient Temperature TA −40 to +100 °C Storage Temperature Tstg −55 to +125 °C *1 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit Forward Current IF 10 20 mA Output Voltage VO 0 30 V Supply Voltage VCC 4.5 15 30 V Input Voltage VF 0 0.8 V Data Sheet PN10073EJ02V0DS 5

PS9613,PS9613L ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 V, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF IF = 10 mA 1.3 1.65 2.1 V Reverse Current IR VR = 3 V 200 µA Terminal Capacitance Ct V = 0 V, f = 1 MHz, TA = 25°C 30 pF Detector Low Level Output Voltage VOL IF = 10 mA, VCC = 5 V, IOL = 2.4 mA 0.13 0.6 V High Level Output Current IOH VCC = 30 V, VF = 0.8 V 1.0 50 µA High Level Supply Current ICCH VCC = 30 V, VF = 0.8 V, VO = open 0.6 1.3 mA Low Level Supply Current ICCL VCC = 30 V, IF = 10 mA, VO = open 0.6 1.3 mA Coupled Threshold Input Current (H → L) IFHL VO = 0.8 V, IO = 0.75 mA 1.5 5.0 mA Current Transfer Ratio (IC/IF) CTR IF = 10 mA, VO = 0.6 V 44 110 % Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60%, TA = 25°C Ω Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25°C 0.6 pF Propagation Delay Time (H → L) tPHL IF = 10mA, RL = 20 kΩ, CL = 100 pF, VTHHL = 1.5 V, VTHLH = 2.0 V 250 500 ns Propagation Delay Time (L → H) tPLH 520 750 Maximum Propagation Delays tPLH−tPHL −200 270 650 Pulse Width Distortion (PWD) |tPHL−tPLH| 270 650 Common Mode Transient Immunity at High Level Output CMH TA = 25°C, IF = 0 mA, VO > 3.0 V, VCM = 1.5 kV, RL = 20 kΩ, CL = 100 pF 15 kV/µs Common Mode Transient Immunity at Low Level Output CML TA = 25°C, IF = 10 mA, VO < 1.0 V, VCM = 1.5 kV, RL = 20 kΩ, CL = 100 pF 15 kV/µs Data Sheet PN10073EJ02V0DS 6

PS9613,PS9613L *1 Typical values at TA = 25°C. *2 Test circuit for propagation delay time CL includes probe and stray wiring capacitance. Input Output VTHHL = 1.5 V VTHLH = 2.0 V 15 V VOL tPHL tPLH IF (ON) 50% IF (ON) 47 Ω Pulse input (IF = 10 mA) Input (monitor) GND (PW = 10 s, Duty cycle = 1/10) µ RL = 20 kΩ VO (monitor) VCC = 15 V 0.1 Fµ CL = 100 pF *3 Test circuit for common mode transient immunity CL includes probe and stray wiring capacitance. 10% 1.5 kV 0 V VOH 3.0 V 1.0 V VOL VCM 90% tr tf VO (Switch A: IF = 0 mA) VO (Switch B: IF = 10 mA) VO (monitor) VCC = 15 V RL = 20 kΩ0.1 Fµ CL = 100 pF SW IF GND BA USAGE CAUTIONS 1. This product is weak for static el ectricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By -pass capacitor of more than 0.1 µF is used between VCC and GND near device. Al so, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. Data Sheet PN10073EJ02V0DS 7

PS9613,PS9613L TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) 20 40 60 80 1000 20 40 60 80 1000 100 150 –50 –25 0.1 0.2 0.3 0.4 0.5 250 50 75 100 VCC = 15 V, VO = 0.8 V, IO = 0.75 mA –50 –25 0 25 50 75 100 400 200 600 1 000 800 1 200 VCC = 30 V, VO = Open, ICCH : VF = 0.8 V, ICCL : IF = 10 mA ICCL ICCH 0.6 –50 –25 0 25 50 75 100 µ µ VCC = 15 V, IF = 10 mA, IO = 2.4 mA Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Detector Power Dissipation PC (mW) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) High Level Supply Current ICCH ( A), Low Level Supply Current ICCL ( A) SUPPLY CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Threshold Input Current IFHL (mA) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE Forward Voltage VF (V) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE 1.0 0.01 0.1 100 TA = +85˚C +50˚C +25˚C 0˚C –25˚C Data Sheet PN10073EJ02V0DS 8

PS9613,PS9613L Output Current IO (mA) Forward Current IF (mA) Ambient Temperature TA (˚C) Output Current (Relative Value) 0 5 10 15 20 –40 –20 0 20 40 60 80 100 Load Capacitance CL (pF) Propagation Delay Time tPHL, tPLH (ns) 100 200 300 400 500 600 700 0.70 0.80 0.75 0.85 0.95 1.05 0.90 1.00 1.10 VCC = 15 V, IF = 10 mA, CL = 100 pF, RL = 20 kΩ IF = 10 mA, VO = 0.6 V IF = 10 mA, CL = 100 pF, RL = 20 kΩ VCC = 15 V, CL = 100 pF, RL = 20 kΩ VCC = 15 V, IF = 10 mA, RL = 20 kΩ –40 –20 0 20 40 60 80 100 100 200 300 400 500 600 700 200 400 600 800 1 000 1 200 1 400 1 600 0 100 200 300 400 500 01 0 20 30 200 400 600 800 1 000 1 200 1 400 1 600 1 800 –200 tPHL tPLH tPLH – tPHL PWD tPHL tPLH tPLH – tPHL tPHL tPLH tPLH tPHL 0 5 10 15 20 VO = 0.6 V –40˚C +100˚C TA = +25˚C Forward Current IF (mA) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH – tPHL (ns) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. FORWARD CURRENT Ambient Temperature TA (˚C) Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion tPHL – tPLH (ns) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE Supply Voltage VCC (V) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH – tPHL (ns) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. SUPPLY VOLTAGE PROPAGATION DELAY TIME vs. LOAD CAPACITANCE OUTPUT CURRENT vs. FORWARD CURRENT OUTPUT CURRENT vs. AMBIENT TEMPERATURE Data Sheet PN10073EJ02V0DS 9

PS9613,PS9613L VCC = 15 V, IF = 10 mA, CL = 100 pF VCC = 5 V, IF = 10 mA, CL = 15 pF 0 5 10 15 20 25 100 150 200 250 300 350 400 450 500 01 0 20 30 40 50 –200 200 400 800 600 1 000 tPHL tPLH tPHL tPLH tPLH – tPHL tPLH – tPHL Load Resistance RL (kΩ) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH – tPHL (ns) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE Load Resistance RL (kΩ) Propagation Delay Time tPHL, tPLH (ns), Maximum Propagation Delays tPLH – tPHL (ns) PROPAGATION DELAY TIME, MAXIMUM PROPAGATION DELAYS vs. LOAD RESISTANCE Remark The graphs indicate nominal characteristics. Data Sheet PN10073EJ02V0DS 10

PS9613,PS9613L TAPING SPECIFICATIONS (UNIT: mm) Tape Direction Outline and Dimensions (Tape) PS9613L-E3 PS9613L-E4 1.55±0.1 2.0±0.1 4.0±0.1 1.75±0.1 4.5 MAX. 10.4±0.1 12.0±0.1 1.5 +0.1 7.5±0.1 10.3±0.1 16.0±0.3 4.0±0.1 0.3 Outline and Dimensions (Reel) Packing: 1 000 pcs/reel 15.9 to 19.4 Outer edge of flange 100±1.0φ 330±2.0φ 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 2.0±0.5 21.5±1.0 17.5±1.0 Data Sheet PN10073EJ02V0DS 11

PS9613,PS9613L NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 ±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 120±30 s (preheating) 220˚C 180˚C Package Surface Temperature T (˚C) Time (s) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s to 60 s 260˚C MAX. 120˚C (2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions
• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aw are that w hen voltage is applied suddenly bet ween the photocoupler’s input and output or betw een collector-emitters at startup, the out put side may enter the on st ate, even if the voltage is w ithin the absolute maximum ratings. Data Sheet PN10073EJ02V0DS 12

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZ Lead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.