PS9115-V-F4-AX

PS9115 CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP (SO-5) PHOTOCOUPLER −NEPOC Series− Document No. PN10267EJ05V0DS (5th edition) Date Published March 2008 NS

DESCRIPTION

The PS9115 is an optically coupled high-speed, totem pole out put isolator containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9115 is specified high CMR, high CTR and pulse width distortion with operating temperature.

FEATURES

1. Anode 2. Cathode 3. GND 4. V O 5. VCC PIN CONNECTION (Top View)

• High common mode transient immunity (CM H, CML = ±20 kV/μs TYP.)
• Small package (SO-5)
• Pulse width distortion ( ⏐tPHL − tPLH⏐ = 7 ns TYP.)
• High-speed (10 Mbps)
• High isolation voltage (BV = 3 750 Vr.m.s.)
• Totem pole output
• Ordering number of taping produc t: PS9115-F3, F4: 2 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• DIN EN60747-5-2 (VDE0884 Part2) approved No. 40008902 (Option) TRUTH TABLE LED Output ON L OFF H

APPLICATIONS

• Measurement equipment
• PDP
• Line Receiver for FA Network The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2003, 2008

PACKAGE DIMENSIONS (UNIT: mm) <R> 1.27 0.4+0.10 –0.05 0.25 M 0.1±0.1 2.6±0.2 4.4 7.0±0.3 0.5±0.3 0.15+0.10 –0.05 3.4 +0.3 –0.153 MARKING EXAMPLE <R> No. 1 pin Mark Initial of NEC (Engraved mark) Rank Code Year Assembled (Last 1 Digit) Week Assembled N 8 31 9115 N831 N *1 *1 Bar : Pb-Free Type Number Assembly Lot No. 1 pin Mark Initial of NEC (Engraved mark) Rank Code Year Assembled (Last 1 Digit) Week Assembled N 8 31 9115 N831 N *1 *1 Bar : Pb-Free Type Number Assembly Lot SnBi PLATING Ni/Pd/Au PLATING Data Sheet PN10267EJ05V0DS 2

ORDERING INFORMATION <R> Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number PS9115 PS9115-A Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS9115 PS9115-F3 PS9115-F3-A (SnBi) Embossed Tape 2 500 pcs/reel (UL approved) PS9115-F4 PS9115-F4-A PS9115-V PS9115-V-A 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS9115-V-F3 PS9115-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2) PS9115-V-F4 PS9115-V-F4-A Approved (Option) PS9115 PS9115-AX Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS9115-F3 PS9115-F3-AX (Ni/Pd/Au) Embossed Tape 2 500 pcs/reel (UL approved) PS9115-F4 PS9115-F4-AX PS9115-V PS9115-V-AX 20 pcs (Tape 20 pcs cut) DIN EN60747-5-2 PS9115-V-F3 PS9115-V-F3-AX Embossed Tape 2 500 pcs/reel (VDE0884 Part2) PS9115-V-F4 PS9115-V-F4-AX Approved (Option) *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current I F 30 mA Reverse Voltage VR 5 V Detector Supply Voltage VCC 7 V Output Voltage VO 7 V High Level Output Current IOH −5 mA Low Level Output Current IOL 13 mA Power Dissipation P C 130 mW Isolation Voltage BV 3 750 Vr.m.s. Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −55 to +125 °C *1 Reduced to 0.3 mA/ °C at TA = 25°C or more. *2 T A = −40 to +85°C, Applies to output pin VO and power supply pin VCC. Reduced to 2.36 mW/°C at TA = 70°C or more. *3 AC voltage for 1 minute at T A = 25°C, RH = 60% between input and output. Pins 1-2 shorted together, 3-5 shorted together. Data Sheet PN10267EJ05V0DS 3

RECOMMENDED OPERATING CONDITIONS Parameter Symbol MIN. TYP. MAX. Unit High Level Input Current IFH 7.5 12.5 mA Low Level Input Voltage VFL 0 0.8 V Supply Voltage VCC 4.5 5.0 5.5 V TTL (loads) N 3 Operating Ambient Temperature TA 0 +85 °C ELECTRICAL CHARACTERISTICS (TA = 0 to +85°C, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF I F = 10 mA, TA = 25°C 1.4 1.65 1.9 V Reverse Current IR V R = 3 V, TA = 25°C 10 μA Terminal Capacitance Ct V = 0 V, f = 1 MHz, TA = 25°C 30 pF Detector High Level Output Current I OH V CC = VO = 5.5 V, VF = 0.8 V 0.003 200 μA High Level Output Voltage VOH V CC = 4.5 V, VF = 0.8 V, IOH = −2 mA 2.4 3.0 V Low Level Output Voltage VOL V CC = 4.5 V, IF = 7 mA, IOL = 8 mA 0.25 0.6 V High Level Supply Current ICCH V CC = 5.5 V, IF = 0 mA, VO = open 12 16 mA Low Level Supply Current ICCL V CC = 5.5 V, IF = 10 mA, VO = open 13 16 mA High Level Output Short Circuit Current IOSH V CC = 5.5 V, VO = GND, IF = 0 mA, 10 ms or less −26 mA Low Level Output Short Circuit Current IOSL V CC = VO = 5.5 V, IF = 8 mA, 10 ms or less 34 mA Coupled Threshold Input Current IFHL TA = 25°C 2.3 5 mA (H → L) VCC = 5 V, VO = 0.6 V 6 Isolation Resistance RI-O V I-O = 1 kVDC, RH = 40 to 60%, TA = 25°C Ω Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25°C 0.6 pF Propagation Delay Time tPHL TA = 25°C 15 33 65 ns (H → L) VCC = 5 V, IF = 7.5 mA 10 85 Propagation Delay Time tPLH TA = 25°C 15 40 65 ns (L → H) VCC = 5 V, IF = 7.5 mA 10 85 Pulse Width Distortion (PWD) ⏐tPHL-tPLH⏐ V CC = 5 V, IF = 7.5 mA 7 50 ns Common Mode Transient Immunity at High Level Output CMH V CC = 5 V, TA = 25°C, IF = 0 mA, VO (MIN.) = 2 V, VCM = 1 kV 10 20 kV/μs Common Mode Transient Immunity at Low Level Output CML V CC = 5 V, TA = 25°C, IF = 7.5 mA, VO (MAX.) = 0.8 V, VCM = 1 kV 10 20 kV/μs Data Sheet PN10267EJ05V0DS 4

*1 Typical values at T A = 25°C *2 Because a high-level output current (I OH) of 300 μA or more may be output when the temperature is 0°C or less and when VCC is around 3 to 4 V, it is important to confirm the characteristics (operation with the power supply on and off) during design, before using this device. *3 Test circuit for propagation delay time Input Output 1.5 V VOH VOL tPHL tPLH IF (ON) 50% IF (ON) CL includes probe and stray wiring capacitance. Pulse input (IF) VO (monitor) Input (monitor) (PW = 500 ns, Duty cycle = 1/2) 47 Ω V CC = 5 V 0.1 Fμ CL = 30 pF 2.5 kΩ 1.3 kΩ VCC = 5 V *4 Test circuit for common mode transient immunity 90% 10% 1 kV 0 V VOH 2 V 0.8 V VOL VCM VO (IF = 0 mA) VO (IF = 7.5 mA) tr tf CL includes probe and stray wiring capacitance. VO (Monitor) VCC = 5 V 0.1 Fμ CL = 15 pF SW IF VCM USAGE CAUTIONS 1. This product is weak for static el ectricity by designed with high-speed integr ated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high te mperature and high humidity. Data Sheet PN10267EJ05V0DS 5

TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) 20 40 60 80 1000 20 40 60 80 8585 1000 100 150 Forward Voltage VF (V) Forward Current IF (mA) FORWARD CURRENT vs. FORWARD VOLTAGE Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) Detector Power Dissipation PC (mW) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) SUPPL Y CURRENT vs. AMBIENT TEMPERATURE –50 –25 0 25 50 75 1000 ICCL (IF = 10 mA) VCC = 5.5 V ICCH (IF = 0 mA) HIGH LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE Ambient Temperature TA (˚C) High Level Output Voltage VOH (V) –50 –25 0 25 50 75 1000 5 VCC = 4.5 V, VF = 0.8 V, IOH = 2.0 mA Ambient Temperature TA (˚C) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE –50 –25 0 25 50 75 100 tPLH tPHL PWD IF = 7.5 mA VCC = 5.0 V 1.0 0.01 0.1 100 TA = +85˚C +50˚C +25˚C 0˚C –25˚C Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion tPHL – tPLH (ns) Remark The graphs indicate nominal characteristics. Data Sheet PN10267EJ05V0DS 6

0.2 0.1 0.3 0.4 0.5 VCC = 5.0 V Ambient Temperature TA (˚C) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE –50 –25 0 25 50 75 100 Low Level Output Current IOL (mA) Low Level Output Voltage VOL (V) LOW LEVEL OUTPUT VOLTAGE vs. LOW LEVEL OUTPUT CURRENT –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Threshold Input Current IFHL (mA) THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE VCC = 4.5 V, IF = 7.5 mA, IOL = 8.0 mA High Level Output Current IOH (mA) High Level Output Voltage VOH (V) HIGH LEVEL OUTPUT VOLTAGE vs. HIGH LEVEL OUTPUT CURRENT HIGH LEVEL OUTPUT VOLTAGE vs. HIGH LEVEL OUTPUT CURRENT High Level Output Current IOH (mA) High Level Output Voltage VOH (V) Forward Current IF (mA) PROPAGATION DELAY TIME, PULSE WIDTH DISTORTION vs. FORWARD CURRENT 2.5 7.55 10 12.5 13 VCC = 4.5 V, IF = 5.0 mA 0.2 0.1 0.3 0.4 0.5 TA = 85˚C 0˚C 25˚C VCC = 4.5 V, VF = 0.8 VTA = 85˚C 25˚C 0˚C VCC = 4.5 V, IF = 250 AμTA = 85˚C 0˚C 25˚C 5 1 01 52 02 53 0 TA = 25˚C, VCC = 5 V tPHL tPLH PWD Propagation Delay Time tPHL, tPLH (ns), Pulse Width Distortion tPHL – tPLH (ns) Remark The graphs indicate nominal characteristics. Data Sheet PN10267EJ05V0DS 7

TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) Tape Direction PS9115-F3 PS9115-F4 Outline and Dimensions (Reel) Packing: 2 500 pcs/reel 100±1.0φ 13.0±0.2φ 330±2.0φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 1.55±0.1 2.0±0.05 4.0±0.1 1.75±0.1 3.9±0.1 3.45 MAX. 7.4±0.1 0.3±0.058.0±0.1 1.5+0.1 5.5±0.1 12.0±0.2 3.0±0.1 Data Sheet PN10267EJ05V0DS 8

RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) <R> 1.45 0.81.27 5.5 Data Sheet PN10267EJ05V0DS 9

1. Recommended soldering conditions (1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120± 30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 120±30 s (preheating) 220˚C 180˚C Package Surface Temperature T (˚C) Time (s) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s to 60 s 260˚C MAX. 120˚C (2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120 °C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350 °C or below
• Time (each pins) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100°C Data Sheet PN10267EJ05V0DS 10

(4) Cautions

• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly bet ween the photocoupler’s i nput and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is wi thin the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high te mperature and high humidity. Data Sheet PN10267EJ05V0DS 11

SPECIFICATION OF VDE MARKS LICENSE DOCUMENT <R> Parameter Symbol Speck Unit for rated line voltages ≤ 300 Vr.m.s. for rated line voltages ≤ 600 Vr.m.s. IV III Climatic test class (DIN EN 60664-1 VDE0110) 40/85/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) U pr = 1.5 × UIORM, Pd < 5 pC UIORM Upr 707 1 061 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 × UIORM, Pd < 5 pC Upr 1 326 Vpeak Highest permissible overvoltage UTR 6 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Clearance distance >4.2 mm Creepage distance >4.2 mm Comparative tracking index (DIN IEC 112/VDE 0303 Part 1) CTI 175 Material group (DIN EN 60664-1 VDE0110 Part 1) III a Storage temperature range Tstg –55 to +125 °C Operating temperature range TA –40 to +85 °C Isolation resistance, minimum value V IO = 500 V dc at TA = 25°C VIO = 500 V dc at TA MAX. at least 100°C Ris MIN. Ris MIN. Ω Ω Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current I F, Psi = 0) Power (output or total power dissipation) Isolation resistance V IO = 500 V dc at TA = Tsi Tsi Isi Psi Ris MIN. 150 200 300 mA mW Ω Data Sheet PN10267EJ05V0DS 12

Data Sheet PN10267EJ05V0DS 13 PS9115 The information in this document is current as of March, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E 02. 11-1 (1) (2) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard": "Special": "Specific":

Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.

• Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.