PS7802-1A CEL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

DESCRIPTION

The PS7802-1A is a low output capacit ance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side. An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 50% compared with the PS72xx series. It is suitable for high-frequency si gnal control, due to its low C × R, low output capacit ance, and low off-state leakage current.

FEATURES

  • Ultra small flat-lead package (4.2 (L) × 2.5 (W) × 1.85 (H) mm)
  • Low C × R (C × R = 12.6 pF • Ω)
  • Low on-state resistance (Ron = 1.1 Ω TYP.)
  • High pass characteristics (ERT = 45 ps TYP.)
  • 1 channel type (1 a output)
  • Designed for AC/DC switching line changer
  • Low offset voltage
  • Ordering number of taping product: PS7802-1A-F3, F4: 3 500 pcs/reel
  • Pb-F ree product
  • Safety standards
  • UL approved: File No. E72422

APPLICATIONS

  • Measurement equipment 2003, 2006 <R> <R> The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7802-1A Document No. PN10270EJ03V0DS (3rd edition) Date Published September 2006 NS CP(K) −NEPOC Series−

PACKAGE DIMENSIONS (UNIT: mm) 3.6 +0.3 –0.4 2.5±0.3 4 3 N 4.2±0.2 0.2 MAX. 0.2±0.1 3.0 MAX. 1.27 1.85±0.05 0.4±0.1 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET TOP VIEW 0.15+0.1 –0.05 0.2±0.1 0.36 4.6±0.2 MARKING EXAMPLE 601 N Assembly lot Week assembled Year assembled No.1 pin mark (Nicked corner) An initial of "NEC" (Marking details) Last number of type No. : 02 *1 *1 The marking corresponds to the last two digits of the part number below. PS7802-1A *2 Bar : Pb-Free <R> Data Sheet PN10270EJ03V0DS 2 PS7802-1A

ORDERING INFORMATION

Part Number Order Number Solder Plating Specification Packing Style Safety Standard Approval Application Part Number*1 PS7802-1A PS7802-1A-A Pb-Free 50 pcs (Tape 50 pcs cut) Standard products PS7802-1A PS7802-1A-F3 PS7802-1A-F3-A Embossed Tape 3 500 pcs/reel (UL approved) PS7802-1A-F4 PS7802-1A-F4-A *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V Power Dissipation PD 50 mW Peak Forward Current IFP 1 A MOS FET Break Down Voltage VL 40 V Continuous Load Current IL 250 mA Pulse Load Current (AC/DC Connection) ILP 500 mA Power Dissipation PD 100 mW Isolation Voltage BV 500 Vr.m.s. Total Power Dissipation PT 150 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C *1 PW = 100 µs, Duty Cycle = 1% *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output Pins 1-2 shorted together, 3-4 shorted together. RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 5 20 mA LED Off Voltage VF 0 0.5 V <R> Data Sheet PN10270EJ03V0DS 3 PS7802-1A

ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF IF = 5 mA 1.1 1.4 V Reverse Current IR VR = 5 V 5.0 µA MOS FET Off-state Leakage Current ILoff VD = 40 V 0.1 10 nA Output Capacitance Cout VD = 0 V, f = 1 MHz 11.5 pF Coupled On-state Resistance Ron IF = 5 mA, IL = 250 mA 1.1 1.6 Ω Turn-on Time *1, 2 ton IF = 5 mA, VO = 5 V, RL = 500 Ω, 0.1 0.5 ms Turn-off Time *1, 2 toff PW ≥ 10 ms 0.08 0.50 Isolation Resistance RI-O VI-O = 0.5 kVDC 10 Ω Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.3 pF Equivalent Rise Time ERT IF = 10 mA, tr (in) = 25.0 ps, 45 ps V = 250 mV, 50 Ω termination *1 Test Circuit for Switching Time Pulse Input Input monitor monitorVO VL RL IF Rin ton toff 10% 90% Input Output VO = 5 V 50% *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off time will increase. *3 ERT (Equivalent Rise Time) measurement 10% 90%250 mV tr (in) 10% 90%Input 250 mV Output tr (out) ERT = tr (out) – tr (in)2 2 Data Sheet PN10270EJ03V0DS 4 PS7802-1A

TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) –25 0 25 50 75 85 100 100 Ambient Temperature TA (˚C) Maximum Forward Current IF (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 300 200 –25 0 25 50 75 10085 250 150 100 Ambient Temperature TA (˚C) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 1 mA 5 mA 20 mA 30 mA IF = 50 mA 10 mA –25 0 25 50 75 100 1.6 1.4 1.2 1.0 0.8 Ambient Temperature TA (˚C) Forward Voltage VF (V) AMBIENT TEMPERATURE FORWARD VOLTAGE vs. f = 1 MHz 10 20 30 40 6050 Applied Voltage VD (V) Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 02 0 40 60 80 100 10–7 10–8 10–9 10–10 10–11 10–12 10–13 VD = 40 V Ambient Temperature TA (˚C) Off-state Leakage Current ILoff (A) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE IF = 5 mA –1.0 –0.5 0.5 1.00 200 100 –100 –200 LOAD CURRENT vs. LOAD VOLTAGE Load Voltage VL (V) Load Current IL (mA) Remark The graphs indicate nominal characteristics. Data Sheet PN10270EJ03V0DS 5 PS7802-1A

–25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Normalized to 1.0 at TA = 25˚C, IF = 5 mA, IL = 250 mA Ambient Temperature TA (˚C) Normalized On-state Resistance Ron NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE n = 50 pcs, IF = 5 mA, IL = 250 mA ON-STATE RESISTANCE DISTRIBUTION Number (pcs) On-state Resistance Ron (Ω) 5 15 20 2510 30 1.0 0.8 0.6 0.4 0.2 VO = 5 V, RL = 500 Ω TURN-ON TIME vs. FORWARD CURRENT Forward Current IF (mA) Turn-on Time ton (ms) 5 15 20 302510 0.5 0.4 0.3 0.2 0.1 VO = 5 V, RL = 500 Ω TURN-OFF TIME vs. FORWARD CURRENT Forward Current IF (mA) Turn-off Time toff (ms) Turn-on Time ton (ms) Number (pcs) TURN-ON TIME DISTRIBUTION n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω 0.07 0.09 0.06 0.08 0.10 Turn-off Time toff (ms) Number (pcs) TURN-OFF TIME DISTRIBUTION n = 50 pcs, IF = 5 mA, VO = 5 V, RL = 500 Ω Remark The graphs indicate nominal characteristics. Data Sheet PN10270EJ03V0DS 6 PS7802-1A

–25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Normalized to 1.0 at TA = 25˚C, IF = 5 mA, VO = 5 V, RL = 500 Ω Ambient Temperature TA (˚C) Normalized Turn-on Time ton NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE –25 0 25 50 75 100 3.0 2.5 2.0 1.0 0.0 0.5 1.5 Normalized to 1.0 at TA = 25˚C, IF = 5 mA, VO = 5 V, RL = 500 Ω Ambient Temperature TA (˚C) Normalized Turn-off Time toff NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Remark The graphs indicate nominal characteristics. Data Sheet PN10270EJ03V0DS 7 PS7802-1A

TAPING SPECIFICATIONS (UNIT: mm) Tape Direction PS7802-1A-F3 PS7802-1A-F4 Outline and Dimensions (Tape) Outline and Dimensions (Reel) 1.55±0.05 4.0±0.1 2.0±0.05 4.0±0.1 1.75±0.1 2.9 MAX. 0.3 2.9±0.1 2.4±0.1 1.5+0.1 5.3±0.1 5.5±0.05 12.0±0.2 NN N NNN N N Packing: 3 500 pcs/reel 2.0±0.5 R 1.0 13.0±0.2φ 21.0±0.8φ 330±2.0φ 100±1.0φ 2.0±0.5 11.9 to 15.4 Outer edge of flange 17.5±1.0 13.5±1.0 13.0±0.2φ Data Sheet PN10270EJ03V0DS 8 PS7802-1A

RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 3.6 (0.35) 4.4 5.3 1.27 0.8 0.6 24-R0.1 ( ) : Reference value Remark All dimensions in this figure must be evaluated before use. Data Sheet PN10270EJ03V0DS 9 PS7802-1A

RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

  • Peak reflow temperature 260°C or below (package surface temperature)
  • Time of peak reflow temperature 10 seconds or less
  • Time of temperature higher than 220°C 60 seconds or less
  • Time to preheat temperature from 120 to 180°C 120 ±30 s
  • Number of reflows Three
  • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 220˚C Package Surface Temperature T (˚C) Time (s) (heating) to 10 s to 60 s 260˚C MAX. Recommended Temperature Profile of Infrared Reflow 120±30 s (preheating) 180˚C 120˚C (2) Wave soldering
  • Temperature 260°C or below (molten solder temperature)
  • Time 10 seconds or less
  • Preheating conditions 120°C or below (package surface temperature)
  • Number of times One
  • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron
  • Peak temperature (lead part temperature) 350°C or below
  • Time (each pins) 3 seconds or less
  • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. (4) Cautions
  • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. <R> Data Sheet PN10270EJ03V0DS 10 PS7802-1A
  1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. <R> Data Sheet PN10270EJ03V0DS 11 PS7802-1A

The information in this document is current as of September, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use o f such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility o f the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer- designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) M8E 02. 11-1 (1) (2) "NEC Electronics" a s used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "Standard" : "Special" : "Specific" : Data Sheet PN10270EJ03V0DS 12 PS7802-1A

Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points.

  • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal.
  • Do not burn, destroy, cut, crush, or chemically dissolve the product.
  • Do not lick the product or in any way allow it to enter the mouth. 0604 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: contact@ncsd-hk.necel.com Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office TEL: +82-2-558-2120 FAX: +82-2-558-5209 NEC Electronics (Europe) GmbH http://www.eu.necel.com/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 Compound Semiconductor Devices Division NEC Electronics Corporation URL: http://www.ncsd.necel.com/ For further information, please contact PS7802-1A

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZ Lead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.