PS7622A-2A-F3

PS76222A CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

FEATURES

• 2 CHANNEL TYPE 1a + 1a output
• LOW LED OPERATING CURRENT IF = 1 mA
• DESIGNED FOR AC/DC SWITCHING LINE CHANGER
• SMALL AND THIN PACKAGE 8-pin SOP, Height = 2.1 mm
• LOW OFFSET VOLTAGE
• ORDERING NUMBER OF TAPING PRODUCT PS7622A-2A-F3,F4

DESCRIPTION

The PS7622-2A is a solid state relay containing GaAs LEDs on light emitting side (input side) and MOS FETs on the output side. It is suitable for analog signal control because of it's low offset and high linearity. PS7622A-2A 8-PIN SOP , SLOW SWITCHING TYPE, 260 V BREAK DOWN VOLTAGE 2-CH OPTICAL COUPLED MOS FET

APPLICATIONS

• EXCHANGE EQUIPMENT (FAX, MODEM, OCU + SLIC, ETC.)
• MEASUREMENT EQUIPMENT
• FA/OA EQUIPMENT California Eastern Laboratories ELECTRICAL CHARACTERISTICS 1 (TA = 25°C) Input 50 % 90 % 10 % Output Pulse Input Input monitor VL IF Vo monitor R L R in ton toff tftr Vo = 5 V Notes: 1. Test Circuit for Switching Time PART NUMBER PS7622A-2A SYMBOL PARAMETERS UNITS MIN TYP MAX VF Forward Voltage, IF = 1.4 mA V 1.2 1.4 IR Reverse Current, VR = 5 V µA 5.0 ILOFF Off-state Leakage Current, VD = 260 V µA 1.0 C OUT Output Capacitance, VD = 0 V, f = 1 MHz pF/ch 122 IFON LED On-state Current, IL = 200 mA mA 1.0 R ON On-state Resistance, IF = 1.4 mA, IL = 10 mA Ω 3.5 5.0 TON Turn-on Time1, IF = 1.4 mA, V0 = 60 V, RL = 1.5 kΩ , PW = 50 ms ms 10 20 TOFF Turn-off Time1, IF = 1.4 mA, V0 = 60 V, RL = 1.5 kΩ , PW = 50 ms ms 7.0 12 TR Rise Time, IF = 1.4 mA, V0 = 60 V, RL = 1.5 kΩ , PW = 50 ms ms 0.80 TF Fall Time, IF = 1.4 mA, V0 = 60 V, RL = 1.5 kΩ , PW = 50 ms ms 0.4 R I-O Isolation Resistance, VI-O = 1.0 kVDC Ω 109 C I-O Isolation Capacitance, V = 0 V, f = 1 MHz pF 0.4 Diode MOSFET Coupled

ABSOLUTE MAXIMUM RATINGS 1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current mA 50 VR Reverse Voltage V 5.0 PD Power Dissipation mW/ch 50 IFP Peak Forward Current2 A1 MOS FET VL Break Down Voltage V 260 IL Countinuous Load Current mA 200 ILP Pulse Load Current3 mA 400 PD Power Dissipation mW/ch 180 Coupler BV Isolation Voltage 4 Vr.m.s. 1500 PT Total Power Dissipation mW 460 TOP Operating Ambient Temp. °C -40 to +80 TSTG Storage Temperature °C -40 to +100 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1%. 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at T A = 25 °C, RH = 60% between input and output. PART NUMBER PACKAGE PACKING STYLE APPLICATION PART NUMBER 1 PS7622A-2A 8-pin SOP Magazine case 45 pcs PS7622A-2A PS7622A-2A-F3 Embossed Tape 1500 pcs/reel PS7622A-2A-F4

ORDERING INFORMATION

Notes: 1. For the application of the Safety Standard, following part number should be used. RECOMMENDED OPERATING CONDITIONS PART NUMBER PS7622A-2A SYMBOLS PARAMETERS UNITS MIN TYP MAX IF LED Operating Current mA 1 1.4 20 VF LED off Voltage V 0 0.5 OUTLINE DIMENSIONS (Units in mm) PS7622A-2A 9.08±0.5 0.4±0.3 0.25 2.54 2.05 0.05 0.40 M +0.08 –0.05 +0.08 –0.05 +0.10 –0.05 0.15 4.4 7.0±0.3 0.5±0.3 +0.10 –0.05 8765 1234 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOS FET 6. MOS FET 7. MOS FET 8. MOS FET TOP VIEW

Remarks: The graphs indicate nominal characteristics. TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) Ambient Temperature, TA (ºC) Maximum Forward Current, I F (mA) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (ºC) Maximum Load Current, I L (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE Ambient Temperature, TA (ºC) Load Voltage, VL (V) Output Capacitance C out (pF) Forward Voltage, V F (V) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Applied Voltage, VD (V) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE Ambient Temperature, TA (ºC) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE Off-state Leakage Current, I Loff Load Current, I L (mA) LOAD CURRENT vs. LOAD VOLTAGE 100 100 50 75 80 –25 25 300 100 250 200 50 75 80 100 150 –25 25 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1.2 1.0 0.8 –25 0 25 50 75 100 f = 1 MHz 100 150 250 0 10 20 30 40 50 60 200 02 0 40 60 80 10-6 10-7 10-8 10-9 10-10 10-11 VD = 260 V IF = 10 mA 1.00.5 200 100 –100 –200 –0.5-1.0 0

Remarks: The graphs indicate nominal characteristics. TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) Ambient Temperature, TA (ºC) Normalized On-state Resistance, R on NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE On-State Resistance, Ron (Ω ) Number (pcs) ON-STATE RESISTANCE DISTRIBUTION Turn-on Time, ton (ms) Turn-off Time, toff (ms) Turn-off Time, t off (ms) Turn-on Time, t on (ms) TURN-OFF TIME vs. FORWARD CURRENT Forward Current, If (mA) TURN-ON TIME vs. FORWARD CURRENT Forward Current, IF TURN-ON TIME DISTRIBUTION Number (pcs) Number (pcs) TURN-OFF TIME DISTRIBUTION 3.0 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 Normalized to 1.0 at TA = 25 ºC, IF = 10 mA IL = 10 mA n = 50 pcs, IF = 10 mA, IL = 10 mA 0 51 5 10 VO = 60 V, R L = 1.5 kΩ VO = 60 V, R L = 1.5 kΩ 6 8 10 12 14 n = 50 pcs, IF = 1.4 mA, Vo = 60 V, R L = 1.5 KΩ 5678 9 n = 50 pcs, IF = 1.4 mA, Vo = 60 V, R L = 1.5 KΩ

TYPICAL PERFORMANCE CURVES (TA = 25°C) Normalized Turn-off Time, t off Normalized Turn-on Time, t on NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE Ambient Temperature, TA (ºC) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Ambient Temperature, TA (ºC) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 Normalized to 1.0 at TA = 25 ºC, IF = 10 mA, VO = 5 V, R L = 500 Ω TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (REEL) Notes: 1. Packing : 1500 pcs/reel F3, F4 OUTLINE AND DIMENSIONS (TAPE) 16.0±0.3 1.75±0.1 2.0±0.1 12.0±0.1 7.5±0.1 10.45±0.1 2.0±0.5 φ21.0±0.8 φ330 16.4 φ100±5.0 φ13.0±1.0 2.5 +2.0 –0.0 TAPE DIRECTION PS7622A-2A-F3 PS7622A-2A-F4 3.0 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 Normalized to 1.0 at TA = 25 ºC, IF = 1.4 mA, VO = 60 V, R L = 1.5 kΩ

RECOMMENDED SOLDERING CONDITIONS Recommended Temperature Profile of Infrared Reflow (1) Infrared reflow soldering

• Peak reflow temperature 235 ˚C (package surface temperature)
• Time of temperature higher than 210 ˚C 30 seconds or less
• Number of reflows Two
• Flux Rosin flux containing small amount of chlorine (The flux with a max. chlorine content of 0.2 Wt % is recommended (2) Dip soldering
• Temperature 260 ˚C or below (molten solder temperature)
• Time 10 seconds or less
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a max. chlorine content of 0.2 Wt % is recommended.) (3) Cautions
• Fluxes Avoid removing the residual flux with freon-based and chlorine- based cleaning solvent. Avoid shorting between portion of frame and leads. Time (s) Package Surface Temperature T (˚C) 100 to 160 ˚C 60 to 120 s (preheating) (heating) to 10 s to 30 s 235 ˚C (peak temperature) 210 ˚C EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 10/30/2001DATA SUBJECT TO CHANGE WITHOUT NOTICE ∗ : Portion of frame Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.