PS7341CL-1A-E4

PS7341C-1A CEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7341C-1A,PS7341CL-1A

DESCRIPTION

The PS7341C-1A and PS7341CL-1A are solid state relay s containing GaAs LEDs on the light emitting side (input side) and MOS F ETs including current control circuit on t he output side. Current control circuit of OCMOS F ET protects this device from thermal breakdown and output circuit. They are suitable for analog signal control because of their low offset and high linearity. The PS7341CL-1A has a surface mount type lead.

FEATURES

• Limit current (ILMT = 125 to 250 mA)
• High isolation voltage (BV = 3 750 Vr.m.s.)
• 1 channel type (1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (6-pin DIP)
• Low offset voltage
• PS7341CL-1A: Surface mount type
• UL approved: File No. E72422 (S)
• BSI approved: No. 8252/8253
• CSA approved: No. CA 101391

APPLICATIONS

• Exchange equipment
• Measurement equipment
• F A/OA equipment Document No. PN10308EJ01V1DS (1st edition) (Previous No. P12934EJ5V0DS00) Date Published February 2003 CP(K) The mark  shows major revised points.

PS7341C-1A,PS7341CL-1A PACKAGE DIMENSIONS (in millimeters) 9.25±0.5 3.5±0.3 4.15±0.33.3±0.3 0.5±0.1 2.541.34±0.1 0.25 M 0 to 15˚ 7.62 6.5±0.5 9.25±0.5 6.5±0.5 0.10+0.10–0.05 0.9±0.25 9.60±0.4 3.5±0.3 1.34±0.1 0.25 M 2.54 PS7341C-1A PS7341CL-1A 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 123 65 4 TOP VIEW 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 123 65 4 TOP VIEW Data Sheet PN10308EJ01V1DS 2

PS7341C-1A,PS7341CL-1A ORDERING INFORMATION (Solder Contains Lead) Part Number Package Packing Style Application Part Number PS7341C-1A 6-pin DIP Magazine case 50 pcs PS7341C-1A PS7341CL-1A PS7341CL-1A PS7341CL-1A-E3 Embossed Tape 1 000 pcs/reel PS7341CL-1A-E4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number Package Packing Style Application Part Number PS7341C-1A-A 6-pin DIP Magazine case 50 pcs PS7341C-1A PS7341CL-1A-A PS7341CL-1A PS7341CL-1A-E3-A Embossed Tape 1 000 pcs/reel PS7341CL-1A-E4-A *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10308EJ01V1DS 3

PS7341C-1A,PS7341CL-1A ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Symbol Ratings Unit Diode Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V Power Dissipation PD 50 mW Peak Forward Current IFP 1 A MOS FET Break Down Voltage VL 400 V Continuous Connection A IL 120 mA Load Current Connection B 120 Connection C 240 Pulse Load Current (AC/DC Connection) ILP 120 mA Power Dissipation PD 560 mW Isolation Voltage BV 3 750 Vr.m.s. Total Power Dissipation PT 610 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +125 °C *1 PW = 100 µs, Duty Cycle = 1 % *2 Conditions: IF ≥ 2 mA. The following types of load connections are available. Connection A VL (AC/DC) 1 6 43 IL L Connection B Connection C 1 6 2 5 IL L VL (DC)+ 1 6 2 5 IL IL L VL (DC)+ 1 6 2 5

43 IL L VL (DC)+

*3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10308EJ01V1DS 4

PS7341C-1A,PS7341CL-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Symbol Conditions MIN. TYP. MAX. Unit Diode Forward Voltage VF IF = 10 mA 1.2 1.4 V Reverse Current IR VR = 5 V 5.0 µA MOS FET Off-state Leakage Current ILoff VD = 400 V 0.001 1.0 µA Output Capacitance Cout VD = 0 V, f = 1 MHz 63 pF Coupled LED On-state Current IFon IL = 120 mA 2.0 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA 27 35 Ω Ron2 IF = 10 mA, IL = 120 mA, t ≤ 10 ms 22 30 Turn-on Time ton IF = 10 mA, VO = 5 V, RL = 2 kΩ, 0.55 1.0 ms Turn-off Time toff PW ≥ 10 ms 0.07 1.0 Isolation Resistance RI-O VI-O = 1.0 kVDC 10 Ω Isolation Capacitance CI-O V = 0 V, f = 1 MHz 1.1 pF Limit Current ILMT IF = 10 mA, t = 5 ms, VL = 6 V 125 200 250 mA *1 Test Circuit for Switching Time VL RL IF Rin Pulse Input Input monitor monitorVO ton toff 10 % 90 % VO = 5 V 50 % Output Input *2 N rank : 125 to 250 mA M rank : 125 to 180 mA L rank : 170 to 250 mA Data Sheet PN10308EJ01V1DS 5

PS7341C-1A,PS7341CL-1A TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) 100857550250–25 100 Maximum Forward Current IF (mA) Ambient Temperature TA (˚C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERTURE IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1000–25 25 50 75 1.0 1.4 1.6 1.8 1.2 0.8 Forward Voltage VF (V) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERTURE f = 1 MHz 20 40 60 80 100 120 200 150 100 Output Capacitance Cout (pF) Applied Voltage VD (V) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE Off-state Leakage Current ILoff (A) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10085750–25 5025 200 300 100 Maximum Load Current IL (mA) Ambient Temperature TA (˚C) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERTURE LOAD CURRENT vs. LOAD VOLTAGE Load Current IL (mA) Load Voltage VL (V) IF = 10 mA, t = 5 ms –8.0 –4.0 0 8.04.0 –100 –200 100 200 5001000 200 300 400 10–8 10–7 10–6 10–9 10–10 25 ˚C TA = 85 ˚C Data Sheet PN10308EJ01V1DS 6

PS7341C-1A,PS7341CL-1A n = 50 pcs, IF = 10 mA, IL = 10 mA 27 290 ON-STATE RESISTANCE DISTRIBUTION Number (pcs) On-state Resistance Ron (Ω) 30252015105 TURN-ON TIME vs. FORWARD CURRENT Turn-on Time ton (ms) Forward Current IF (mA) VO = 5 V TURN-OFF TIME vs. FORWARD CURRENT Turn-off Time toff (ms) Forward Current IF (mA) n = 50 pcs, IF = 10 mA, VO = 5 V 0.07 0.080 Number (pcs) Turn-off Time toff (ms) TURN-OFF TIME DISTRIBUTION 0.5 0.7 Number (pcs) Turn-on Time ton (ms) TURN-ON TIME DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 10 mA 0.5 1.5 2.0 3.0 1.0 2.5 0.0 100755025–25 0 Normalized On-state Resistance Ron Ambient Temperature TA (˚C) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERTURE 30252015105 0.05 0.15 0.20 0.30 0.10 0.25 VO = 5 V Data Sheet PN10308EJ01V1DS 7

PS7341C-1A,PS7341CL-1A Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Turn-on Time ton Ambient Temperature TA (˚C) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERTURE Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, t = 5 ms, VL = 6 V 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Limit Current ILMT Ambient Temperature TA (˚C) NORMALIZED LIMIT CURRENT vs. AMBIENT TEMPERTURE Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V 1000–25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 Normalized Turn-off Time toff Ambient Temperature TA (˚C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERTURE Remark The graphs indicate nominal characteristics. Data Sheet PN10308EJ01V1DS 8

PS7341C-1A,PS7341CL-1A TAPING SPECIFICATIONS (in millimeters) Tape Direction PS7341CL-1A-E3 PS7341CL-1A-E4 Outline and Dimensions (Tape) 1.55±0.1 2.0±0.1 4.0±0.1 1.75±0.1 4.5 MAX. 10.4±0.1 12.0±0.1 1.5 +0.1–0 7.5±0.1 10.3±0.1 16.0±0.3 4.0±0.1 0.3 Outline and Dimensions (Reel) Packing: 1 000 pcs/reel 330±2.0 100±1.0 2.0±0.5 13.0±0.2 R 1.0 21.0±0.8 2.0±0.5 15.9 to 19.4 Outer edge of flange 21.5±1.0 17.5±1.0 Data Sheet PN10308EJ01V1DS 9

PS7341C-1A,PS7341CL-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering

• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120 ±30 s
• Number of reflows Two
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 220˚C Package Surface Temperature T (˚C) Time (s) (heating) to 10 s to 60 s 260˚C MAX. Recommended Temperature Profile of Infrared Reflow 120±30 s (preheating) 180˚C 120˚C (2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions
• Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10308EJ01V1DS 10

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A -AZ Lead (Pb) < 1000 PPM Not Detected (*) Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.